PROVN OF ROOM AT MUSEUM AT VSN, NAGPUR

Excavation in trenches n.exc 1.50M wide & n.exc 1.50M deep for foundation etc or for shafts wells cesspits ,manhole pier holes etc n exc 10 sqm on plan and n exc 1.5 m depth and getting in hard/dense soil complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and demolished meterial to be removed out side of MD land complete all as specified and as directed.

Material and labour for cement concrete( 1:4:8) type D2 (40mm graded) in foundation filling and mass concreting complete all as specified and as directed.

Material and labour for brick work with fly ash old size bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Material and labour for providing ,cement concrete type B1 (1:2:4) using 20 mm graded aggregate ,in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses string courses parapets and railing upto 60 cm height copings, kneelers, apex stones, bed plates and similar complete all as specified and as directed.

Material and labour for RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) for beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

Material and labour for RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) for chajjas complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. fair finished surfaces.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges fair finished surfaces complete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. or securing with complete all as specified and as directed.

All as per item No 10 above but 5 mm dia & over upto & incl 10 mm dia in stirrups complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM (1:6) on fair faces of brick/concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick/concrete wall surfaces, finished even including mixing integral waterproofing compound. complete all as specified and as directed. Note: WPC measured and paid separately.

Supply only integral waterproofing compound

Material and labour for preparation of new plastered surfaces of walls and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed at any height incuding necessary scaffolding if required at site.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm for any types of soil.

Removing excavated material (soils) n exc. 50m and depositing under floor area etc where directed at a level n exc. 1.5 m above the starting POINT including ramming watering etc complete all as specified and as directed.

Supply and forming embankment including raising or lowering earth, spreading in layers n exc 30 cm thick, watering ramming/rolling and finishing to required size, shape etc by the soil obtained from the outside of MoD land complete all as specified and directed.

Material and labour for steel work in tubular sections of any type as in trusses, post, rafter, purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1979 grade St-240. complete all as specified and directed.

Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described over one coat of red oxide primer complete all as specified and directed.

Supply and fixing pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for Hard core of broken stone or boulders of gauge n exc 63 mm depossted, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Material and labour for for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggr) as in foor.

Material and labour for providing ,cement concrete type C1(1:3:6) using 20 mm graded aggregate ,in lintel upto 1.5m clear span ,cills,steps, seismic and other similar bands, plinth protection, string courses parapets and railing upto 60 cm height coping and similar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fixing dark/light shade double charged (Ultracharged) vitrified tiles 10 mm thick (square/rectangular) polished area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm in floors, parking etc. set and jointed in neat cement slurry and POINTed in white or coloured cement to match with shade including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fixing dark/light shade double charged (Ultracharged) vitrified tiles 10 mm thick (square/rectangular) polished area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm on vertical surfaces such as skirting, dado, risers to steps etc set and jointed in neat cement slurry and POINTed in white or coloured cement to match the shade including 10 mm thick rendering in cm (1:4) as in back coat complete all as specified and as directed.

Material and labour for for exposed metal frame ceiling with non asbestos fibre cement building boards of 4mm thick of 600mm x 600mm size fixed or laid / inserted to GI framework with appropriate numbers of hangers with screws complete all as specified and directed.

Supply and fixing of anodised aluminium snap grid frame work of size 605 x605 mm for false ceiling complete all as specified and directed.

Supply and fixing of hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for 605 x 605 mm size of grid of false ceiling complete all as specified and directed.

Material and labour for powder coated anodised aluminium frame of any type for doors, windows, ventilator with one or more rebates including jointing cleats for fixing and window grill etc complete all as specified and directed.

Material and labour for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

Material and labour for anodised aluminium window and ventilator shutters, any type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Supply and fixing figured glass, pin head type in square exc 0.50 Sqm each pane, 6 mm thick fixed to aluminium section complete all as specified and directed.

Supply and fixing Sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 4 mm thick fixed to aluminium section complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc.

Supply and fixing of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

Supply and fixing mortice lock of brass, 4 levers, vertical type, size 75 mm including stainless steel handles (02 Nos) on both sides etc complete all as specified and as directed.

Material and labiur for point wiring (concealed) on walls and surface on ceiling complete with FRLSH PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer cover of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light POINT controlled by one switch

(b) One wall fan/ceiling fan point controlled by one switch

(c) One switch socket outlet modular type 3 pin 6 amp on same board.

All as per item No 40 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 40 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Note for Item No. 40 to44 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for POINT wiring shall be deemed to include the cost of making good.

Supply & fixing new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power co nsumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/Wipro.

Supply & fixing LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of make : CG Cat Part No. LSTS-25-CDL :- Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed.

Supply & Fixing Decorative LED panel Light (600mm x 600mm) 36 watt having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min efficacy of 120 Lumen/W, CRI>80 CCT upto 6500K, Beam angle of 120 deg, max ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5kV, Life class of 50,000 Hrs at L70B50 incuing driver, having mounting arrangement with board for surface type or spring loaded mounting clips with all accessories & connector etc internally pre-wired, including connecting up with twin core twisted flexible copper conductor cable and including suitable size of down light frame of same make for fixing all as specified and as directed. Make : CG Cat Part No. LCTLRNE-36-FO-CDL or equivalent in Wipro/Philips.

Supply & Fix 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 120 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675977 or equivalent in Seimens/ Anchor Roma

Supply & Fix Switch modular type, single pole one way 6 Amps, 240 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in Seimens/ Anchor Roma

Supply & Fix socket modular type single pole one way 6 Amps 3 pin 240 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in Seimens/ Anchor Roma

Supply & Fix for ceiling rose, surface bakelite, 65 x 50 mm, three terminalswith ISI marked all as specified and as directed.

Supply & Fix socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Seimens/ Anchor Roma

Supply & Fix switch modular type 16 Amps,one way with indicator, 1 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Seimens/ Anchor Roma

Supply & Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 4 way with 200 amps rated busbar, 240 volts, with 100 Amp copper Bus bar as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507610 or equivalent in L & T/ Seimens

Supply & Fix MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed. Make : Legrand Cat No. 408617 or equivalent in L & T/Seimens.

Supply & Fix MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed.

Supply & Fix Energy saving ceiling fan 1200 mm sweep min air delivery 210 CFM with double ball bearing in opal white colour and BEE 5 star rated BLDC complete including provision of 3 core copper wire of size 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core all as specified and as directed.