REPAIR / REPLACEMENT OF JOINERY WORK, PLUMBING WORK, FLOORING WORK AND ALLIED B/R WORKS IN OTM INF BN AND OTHER UNITS AT DHANA MIL STN.

Demolition of Brick or Stone Masonry built in cement mortar etc complete complete all as specified and directed.

Material & labour for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick (below or above GL) incl tiling if any complete all as specified and directed.

Material & labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, subbase and mass concrete complete all as specified & directed.

Material & labour PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Material & labour for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding screed bed 15mm in CM (1:4) complete all as specified and directed.

Material & labour for glazed ceramic colour tiles, in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick thick set and jointed in neat cement slurry and pointed in white or colou cement to match fixed over 10mm thick CM (1:3) as in backing coat complete all as specified and directed.

Material & labour for Vitrified ceramic coloured light shade 10mm thick(square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors over and including 20mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.

Material & labour for Vitrified ceramic coloured light shade 10mm thick(square/rectangular) polished, area of each tile not exceeding 0.36 Sqm on vertical surfaces such as skirting, dado and risers to steps etc over & including 10 mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified & directed.

Material & labour Sand filling under floor/pavement or in foundation including watering and consolidation complete all as specified and directed.

Material & labour for machine pressed precast concrete interlocking paver block in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment (reflective type) complete all as specified and as directed.

Material & labour for Granite of 18-20mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and icluding 20 mm screed bed in CM 1:3 all as specified and directed.

Material & labour for Taking down of cement plaster in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. all as specified and directed.

Material & labour for 20 mm thick rendering in CM 1: 4 on faces of brick or concrete surface, shall be done in two coats comprising 5mm thick in CM 1:4 mixed with water proofing compound @3% by weight of cement and over a backing coat of 15mm thick in CM 1:4 and finished with trowel to an even and smooth surfaces without using any extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid in respective item complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

Material & labour for 15 mm thick rendering brick or concrete surface in CM 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed.

Material & labour for concrete surface in cm 1:3 finishing the surfaces fair & even without using extra cement as in ceiling complete all as specified and directed.

Material & labour Preparation of new plastered surface wall and applying two coat of Exterior weather proof water base emulsion paint over a coat of white cement based putty complete all as specified and directed.

Material & labour for preparation of newly plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by the Engr-in Charge.

Material & labour for prepration of new ceiling surfaces, applying 3 coat of white wash on ceiling all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door/shutter, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Supply and fixing powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solovent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in M.S. frame welded sealed to the stiles and rail with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Supply and fixing Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed.

Hacking out old glass (any thickness size quality or description) from wooden frame or stone, concrete or brick surrounds glazed with putty or fixed with beads all as specified and directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed

Supply and fixing 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed.

Supply and fixing in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.180 mm and fixed and with tinned tacks or galvanised wire staples, complete all as specified.

Supply and fixing Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg aluminium extruded section body complete all as specified and as directed.

Supply and fixing for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed

Supply and fixing for 150 mm aluminium handles, cast type, anodised complete all as specified.

Supply and fixing for ISI Marked 200 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified.

Supply and fixing 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply and fixing for 100mm Mild steel butt hinge complete all as specified and directed.

Supply and fixing 4-levers Aluminium Mortice lock, vertical type, size 100 mm complete all as specified and directed

Material & labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified.

Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness & any position including cover fillets complete all as specified and directed

Supply and fixing Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specifiedcomplete all as specified and as directed.

Material & labour foe exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paidseparately) complete all as specified and directed

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, for unframed work in any position complete all as specified and as directed.

Supply and fixing steel work as in rafter, purlins, posts tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 Complete all as specified and as directed.

Supply and fixing pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Supplying and laying of GI tubing Dia 15mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified.

Taking up or down 20mm mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Supplying and laying of GI tubing Dia 20mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified.

Taking up or down 25mm mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Supplying and laying of GI tubing Dia 25mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified.

Supply and fixing 25mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

Supply and fixing in repair of ISI marked 15mm bore stop valves/angle valve concealed fancy type cast copper alloy, chromium plated with long shank and cup , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supply and fixing 15 mm Pillar taps, cast copper alloy, chromium plated fancy type, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixing complete all as specified and directed by engr in charge.

Supply and fixing in repair for ISI marked 15mm bore, fancy type bib tap of chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing for in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing brass chromium plated tubular towel ring complete all as specified and as directed by the Engineer-in-Charge

Supply & fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing in repair for vitreous China wash basin, white, flat back, size 450x300mm including PVC connections 15mm size with PTMT nuts of length 450mm,waste coupling, 40mm pvc waste pipe of suitable length, brackets,and cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair vitrous china white oval type under counter WHB of size not less than 195x600x425mm of first quality fixed all as specified and directed.

Supply and fixing in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair vitreous china wash down water closed pan (pedestal Pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed.

Supply and Fixing in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall with PVC clamps complete all as specified.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorss complete all as specified.

Supply and fixing in repair waste coupling 40mm suitable size for kitchen sink of PTMT (half or full threaded) complete all as specified and directed

Supply and fixing in repair 40mm bore PVC waste pipe for kitchen sink one mtr long complete all as specified and directed.

Supply and fixing in repair 32mm bore PVC waste pipe for wash basin one mtr long complete all as specified and directed.

Supply and fixing in repair PVC connection 15 mm size with PTMT nuts of length 600 mm all as specified and directed.

Supply and fixing in repair Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed

Hoisting & Fixing 500 Ltr rotational moulded polyethylene water stotage tanks (cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed.

Hoisting & Fixing 1000 Ltr rotational moulded polyethylene water stotage tanks (cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed.

Material & labour for preparation of old plastered surfaces of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required sharde & colour, as per manufacturer's specification over a coat of 1mm thick putty complete all as specified and directed by the Engr-in Charge.

Material & labour for preparation of old plastered/unplastered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

Material & labour for preparation of old surface of ceiling and applying Two coat white wash complete all as specified and as directed

Material & labour for Preparation of old painted surfaces of Steel/ steel based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & labour for preparations of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 16800/- ]