SMART PERIODICAL SERVICES TO CERTAIN OTM ACCN IN TECHNICAL AREA AT AF STN ADAMPUR

M & L for rendering 15 mm thick on fair faces of brick wall cement finished even and smooth (without using extra cement) in CM 1:4 including taking down cement plaster complete all as specified and directed.

M & L for rendering 5 mm thick on brick or concrete surface of ceiling finished even and smooth (without using extra cement) in CM 1:3 including taking down cement plaster complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall finished fair & even and smooth (without using extra cement) in CM 1:6 including taking down cement plaster complete all as specified and directed.

M&L for Preparation of new plastered wall surfaces of any description complete all as specified and applying the following: - a) Applying wall care putty, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed).complete all as specified. (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer in disruptive/camouflaging pattern of six/four shades complete all as specified and directed.

M&L for Preparation of new plastered wall surfaces complete all as specified and applying the following: - (a) Applying wall care putty upto 2mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) on wall surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or unplastered surfaces of walls with alkali resistant priming paint by auto roller/ spray machine, complete all as specified. (c) Two coats oil emulsion distemper white or coloured by brush, auto roller/ Spray machine on wall surfaces (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for preparation of new plastered ceiling surfaces complete all as specified and applying the following: - (a) Applying wall care putty upto 2mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) on ceiling surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or unplastered surfaces of ceiling with alkali resistant priming paint by auto roller/ spray machine, complete all as specified. (c) Two coats oil emulsion distemper white or coloured by brush, auto roller/ Spray machine on ceiling surfaces (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for preparation of plastered or un plastered old decorated surfaces of walls by Vacuum based sanding machine all as specified, removal of nails etc & filling cracks/hole ) and applying one coat of oil emulsion distemper white or coloured by brush, auto roller complete all as specified & directed by Engineer-in-Charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for Complete removal of existing treatment of any description, including preparation of wall surfaces of any description, complete all as specified and applying the following: - (a) Applying wall care putty upto 2mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) on wall surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or unplastered surfaces of walls with alkali resistant priming paint by auto roller/ spray machine, complete all as specified. (c) Two coats oil emulsion distemper white or coloured by brush, auto roller/ spray machine on wall surfaces (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for preparation of old plastered ceiling surfaces complete all as specified and applying the following: - (a) Applying wall care putty upto 2mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) on ceiling surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or unplastered surfaces of ceiling with alkali resistant priming paint by auto roller/ spray machine, complete all as specified. (c) Two coats oil emulsion distemper white or coloured by brush, auto roller/ Spray machine on ceiling surfaces (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for One coat of exterior acrylic emulsion over a coat of exterior (water based) primer on old wall surfaces, in disruptive/camouflaging pattern of six/four shades including preparation of surfaces, for height not exceeding 12 metre, complete all as specified and directed.

M&L for complete removal of existing treatment of any description, including preparation of wall surfaces of any description, complete all as specified and applying the following: - (a) Applying wall care putty upto 2mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) on wall surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or unplastered surfaces of walls with alkali resistant priming paint by brush , auto roller/ spray machine, complete all as specified. (c) Two coats of exterior acrylic emulsion white or coloured by brush, auto roller/ spray machine on wall surfaces (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying two coat of synthetic enamel paint by brush , auto roller/ spray machine complete all as specified and as directed by Engineer-in-Charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for Two coats of synthetic enamel paint on old surface over in disruptive/camouflaging pattern of four shades including preparation of surfaces,& including a coat of red oxide primer over steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces after complete removal of existing painted surfaces, for height not exceeding 10 metre, complete all as specified and directed.

M&L Preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer by auto roller/ spray machine complete all as specified and directed by Engr in charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for Uprooting tree/plants upto 30 cm girth from wall or any part of building upto double storey buildings completely to the entire satisfaction of Engineer-in-Charge, making good the disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-1 using 20mm graded stone aggregate to match with existing surfaces and removal of rubbish outside MOD land complete all as specified and as directed.

M&L for repairing of RCC projection chajjas, roof, facia etc by necessary preparation. Scraping cutting, chiselling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete (1:1.5:3) using 20mm graded stone aggt and reinforcement with welded mesh of weight 2 Kg per Sqm but n.exc 3 Kg per Sqm (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 Sqm and thickness of RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete all as specified and as directed by Engr-in-Charge. (The rate quoted by the contractor shall included for scaffolding and necessary formwork upto triple storey bldg).

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, cement concrete ( un reinforced), etc complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete (1:3:6), type C-2, (using 40 mm graded mechanically crushed stone aggregates), laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and as directed. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.

Note :- 1. The preparation and painting work shall be executed by authorized applicator of paint manufacturer only. 2. Contractor shall submit the MOU letter from paint manufacturer within 15 days from commencement of work. 3. Contractor shall procure the paint after approval of make from GE in three equal parts, 1st part within 15 days of commencement and rest 2nd parts at equal intervals or earlier if required and to be kept in Engr in charge custody . 4. Periodical work shall be completed with in 7 days after handover of key of new allotted accn, in case of delay penalty @ Rs 1000/- per day per qtrs. 5. Necessary cleaning of painting/distemper marks from floor, doors, window, cleaning of furniture and window panes, pelmet box, Pelmet box/Drapery rod is deemed to be inclusive of rate quoted by the contractor Non cleaning of floor shall be recovered @ Rs 1000/- per accn for the same. 6. Contractor shall procure/brought to site the sanding machine, auto roller, paint mixing machine and other specified T&P within 15 days from the date of commencement. 7. Electric meter during Smart periodical will be born by contractor at the rate as specified in CA, initial and final meter reading shall be recorded in handing taking notes. 8. Work will be strictly executed by mechanised means/ tools (spray machine) as required for smart periodical services. In case where work by mechanised means / tools is not feasible then work can be carried out through auto roller or any other mean (As directed) after obtaining direction from Engineer-in-Charge. 9. Work services will be executed in highly restricted area, and site will be provided as per availability for a limited time frame 10 Contractor have to retain/ deploy the labourers in case of emergency complaints to rectify the complaints. In case of emergency contractor have to provide labour and material at short notice of time, failure to complete the work services within 24 hours the recovery @ Rs 1000 per complaint will be recovered from RAR/ Final bill. 11. Contractor (himself or through supervisor) have to get direction daily from Engineer-in-Charge to carrying out work as per requirement. 12. Site will be handed over to contractor as and when the site will be handed over to MES by the users and no compensation would be admissible to contractor in this regard. 13. Quoted rates shall include all the above quoted notes, nothing extra will be paid,