Loading…
Loading…
Tender Value
₹4.8 L
EMD Value
₹9,540
Closing Date
2 Sept 2026, 6:55 pm
Executive Engineer REW Pulwama
Executive Engineer REW Pulwama
CO P Bund on Gratt Kul Opposite Side of Chinar Tree Phase II At Naroo Near LO Lt Abdul Gani Khan And Others At Naroo Pulwama
2026_RDPR_321949_2
e- NIT No. 101/2026-27 Dated 22-08-2026
Open Tender
Civil Works
Percentage
Pulwama
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Executive Engineer REW Pulwama
₹9,540
22 Aug 2026
22 Aug 2026
3 Sept 2026
22 Aug 2026
2 Sept 2026
22 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying of dry soling & Plum including all carriages/Leads and lifts | 1 | cum | - | - |
| 2 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | - | cum | - | - |
| 3 | Providing and laying upto floor v level reinforced cement concrete in kerbs, steps and the
like including curing but excluding the cost of centering, shuttering, finishing and
reinforcement with
5.4.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | 1 | cum | - | - |
| 4 | FORM WORK
Centering and shuttering including strutting, propping etc. and removal of form for:
5.9.3 Suspended floors, roofs, landings, balconies and access platforms. | 1 | sqm | - | - |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete upto plinth level
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. | 1 | kg | - | - |
| 6 | Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3
(1 cement: 3 fine sand) including curing. | 1 | sqm | - | - |
| 7 | Providing and applying white cement based putty of specified thickness,
of approved brand and manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete.
13.88.2 2 mm thick | - | sqm | - | - |
| 8 | Finishing walls with acrylic smooth exterior paint of required shade on
New work (Two or more coats applied @ 1.67 liter/10sqm over and
including priming coat of exterior primer applied @ 2.20kg/10sqm) | - | Sqm | 1 | - |
| 9 | Distempering with 1st quality acrylic distemper (ready mixed)having
VOC content less than 50 gms/litre,two or more coats on new work of
approved manufacturer, of required shade and colour complete as per
manufacturer’s specifications | 1 | sqm | - | - |
| 10 | Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows fixing with butt hinges of required size with
necessary screws, excluding panelling which will be paid for separately, all
complete as per direction of Engineer-in-charge. (Note: -Butt hinges and
necessary screws shall be paid separately).Rate for thickness of
shutter in mm per sqm 30mm thick Imported wood | - | sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_1076672.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].