PROVIDING PUBLIC HEALTH SERVICES IN NEWLY CONSTRUCTED BATHROOMS AT KOTHI NO. 45/2, CHANDIGARH AND ALL OTHER WORKS CONTINGENT THERETO.

Amount

Providing and Installing Sauna

Providing and installing ARTIZE SAUNA 220X200X210 CM CEDAR BIO (6-8S) CERAMIC & STOVE HTR TEMP.GLS INSIDE & OUTSIDE TOUCH CTL WHT LGT WT CVR CHROMO LGT RADIO USB CON. MP3 PLAYER CONNECTOR (6S) (HSN Code:39229000) complete in all respect. (CAT No. ASUNAW-1102A220)

Providing and Installing Steam Bath

Providing and installing JAQUAR STEAM GENERATOR WITHOUT DIGITAL CONTROL PANEL- 18 KW & MID CONTROL PANEL EA FOR JAQUAR STEAM GENERATOR ) complete in all respect. (CAT No. JSG-WHTNMID180 & JSG-WHTCPSQUARE)

Public Health Services.

Screed of 50mm thick cement concrete 1:8:16 with stone aggregates to be laid below the topping using mechanical mixer for mixing of material

Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.)

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.

(a) 15 mm i/d

(b) 20 mm i/d

(c) 25 mm i/d

Providing, fixing and jointing G.I Union Couplings (of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.

(a) 15 mm i/d G.I. Union

(b) 20 mm i/d G.I. Union

(c) 25 mm i/d G.I. Union

Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.

20mm i/d Gun Metal peet valve

Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects

Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.

Through wall 22.86 cm thick

Providing and installing in position of domestic water pressure boosting pump of approved make (To the approval of Engineerin- charge) including all pump accessaries but excluding cost of G.I pipe & specials complete in all respects.

Pressure pump of 1.0 HP with 4800 LPH, 45meter head with SS pump & 19 litre capacity Tank

Excavation manually in trenches with straight or open cutting in a builtup street/Lanes having wall to wall width upto 3 meter for sewer and manholes to full depth as shown in drawings including shoring, dressing to correct sections and dewatering of rain water, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning roads, fixing and maintenance of caution boards, fencing, refilling trenches, watering, dressing and restoration of surface to original level and removal of surplus spoils from the site of works upto 15 mtr., for all works other than connections to complete in all respects. (20.00 x 0.91 x 1.20 = 21.84 Cum)

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.

160mm o/d pipe

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C.inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.

Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal

Making connection of newly laid sewer in walls of existing manhole of fully charge sewer including cost of pluging sewer, desilting, removal of sullage water and making good of khudda

Sewer connections upto 300 mm id

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect.

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.

C.P. Brass extension piece, 25mm long to 50mm long

Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.

PVC tube connection of size 15 mm x 450 mm with Brass nut

Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing

100mm i/d H.C.I. pipe lines laid complete

75mm i/d H.C.I. pipe lines laid complete

Providing drip seal joint to H.C.I. pipes and specials including cost of drip seal, yarn and tool etc. of approved mate to the approval of Engineer in Charge

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc

With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg)

Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining

For 75mm i/d pipes

75mm i/d Plain Tee

75mm i/d Collars

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.

Size 75 mm x 75 mm

Providing and fixing in position automatic brass Ball Cock in tanks.

Brass Ball Cock with rod and Plastic Ball

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.

Triple Layer Tanks

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.

G.I. tank nipple 20mm i/d

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.

100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

Cranes 35 tonnes for Lifting Purpose

Providing and laying Ceramic floor tiles 600x600mm or more (thickness to be specified by the manufacturer) of Nitco/Kajaria or any other reputed make conforming ot SI :15622 of approved make in all clours laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Fine Sand) for new flooring complete.

Providing and laying Ceramic wall tiles 1200x300mm or more (thickness to be specified by the manufacturer) of Ispira/Nexion/Rak or any other reputed brand make conforming ot SI :15622 of approved make in all clours laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Fine Sand) for new flooring complete.

Providing and fixing ONEX Marble including carriage & Wastage etc. complete in all respects.

Providing and fixing in position premium range C.P.brass 15mm Angular stop cock with Wall flange of Jaquar make (FLR-CHR-5053N) or any other equivalent make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing in position premium range C.P. brass Maze Prime Round Shape Single Function Shower 450mm Dia Aisi 304 Stainless Steel In Chrome Finish With Rgb Led Light Remote Control & Installation Kit For False Ceiling with shower arm with 20mm i/d Inlet and 600mm long Square shape with flange of Jaquar make (Code OHS-CHR-1673) + ( SHA-GBP-455L600) or any other equivalent make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing TOWEL RACK 24 INCH Jaquar Make (AQN-CHR-7781) complete in all respect

Providing and fixing Robe Hook Jaquar Make (AQN-CHR-7791) complete in all respect.

Providing and fixing in position premium range Aquamax Exposed Part Kit Of Thermostatic Shower Mixer With 2-Way Diverter (Exposed Part-KUP-CHR-35681KPM+Conceled part- ALD-CHR-681) or any other equivalent make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing in position premium range Maze Hand Shower Ø95mm Round Shape Single Flow (Face Plate Stainless Steel & Abs Body In Chrome Finish) With Rubit Cleaning System + Sliding Rail Dia 19mm & 600mm Long Round Shape With Hand Shower Holder + Flexible tube 8mm dia. & 1.5m long with nuts of Jaquar make (Code HSH-CHR-1653) + (SHA-CHR-1197N) + (SHA-CHR-549D8) or any other equivalent make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing in position premium range Kubix Prime bath tub spout with button attachment for hand shower with wall flange (SPJ-CHR-35463PM) or any other equivalent make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing in position premium range Verna Manual Storage water heater 300 Ltr. Cap. Floor mounted installation of Jaquar make or any other equivalent make (Cat No.: VRN-Gry-300) complete in all respects.

Raising of Manhole cover including excavation, demolishing, brick work, plaster etc. complete in all respects.

Providing and fixing MS Angle Iron Shed with fibre sheet on top fixing with rivets as per approval of Engineer in charge including cost of material and labour complete in all respects.

Providing and filling Epoxy in Tiles complete in all respects.

Making Groove 3mm thick in Tiles complete in all respects.

Providing and fixing Submersible Pump of reputed make complete in all respects.

Carriage of Malba from site of work to dumping ground.

Providing and Installing Spa

Providing and installing Polaris Spa 2200x2200x900 mm,Shell Color-Oyster Opal With Panels color-Coffee, Thermic Cover Color- Coffee,Stair,( 6 Seater) of Dry Weight 420kg with Fountain jets, Perimeter Insulation, High-density PU insulation foam on shell 25mm, Set & Forget Control System, Underwater LED, Foot Jets, Bluetooth music system, SS Frame, Bluetooth music system etc., complete in all respects. (CAT No. JSP-WHT-SPAPOLARIS6S)

Shower Enclosure

Providing and fixing Glass shower enclosure with Black lipped Profile Aluminium Frame with door approved make complete in all respect. ( Size 8'-6" x 7'-0 )

Satish Kumar Contractor (BID ID -646084)