REPAIR/MAINT OF DG SETS OF VARIOUS CAPACITIES AND OTHER ALLIED WORKS AT WATER SUPPLY PUMP HOUSE UNDER GE E/M LUCKNOW

Amount

Daily Maintenance of AMF Panels of any make and model of 18 D.G.Sets at various locations of in Lucknow Cantt area including cleaning overhauling and repairs to defective AMF Panels after renewal of defective spares / components of any approved Make as per existing or its equivalent complete all as specified & directed. [Note :(i) Each AMF Panel shall be cleaned /maintained daily under supervision of EIC (ii) Fixing of defective spares / Components are deemed to be included in the unit rate but cost of spares / components will be paid under respective items here-in-after (iii) Daily maintenance register shall be maintained for each pump house and shall be signed by representative of contractor and the Engineer in-Charge after doing necessary maintenance).

Labour only for repair and maintenance and cleaning of DG set of any make. Capacity-30 to 82.50 KVA including replacement of diesel filter lubricating oil filter, rubber hose pipe, V-belt, Oil pipe, diesel pipe and worn out parts including cleaning of Diesel Tank. (Spare shall be measured and paid separately in relevant item of schedule complete all as specified and directed)

Dismantling of existing unserviceable asbestos rope and S&F new asbestos rope to DG Set of size 20 mm dia wrapped over the exhaust pipe including fixing complete all as specified and directed

M&L for plaster of Paris over the asbestos rope for DG set complete all as specified and directed

Taking out FIP from DG set transporting to service center/contractor workshop for over hauling/calibration and refixing on DG Set after replacement of worn out parts such as screen filter, delivery valves, plunger, O-ring spring rotor assembly injector element etc complete all as specified and directed (a) 32 KVA TO 82.5 KVA

Taking out of turbo charger from DG Set transportation to work shop for repairing and replacement of turbo charger kit & refixing to DG Set and testing complete all as directed by Engineer-in-charge for following capacity (b) 32 KVA TO 62.5 KVA

S&F in replacement alternator (Dynamo) charger suitable for 12 Volt Battery with all accessories i.e. fabrication of mounting brackets nut bolt etc suitable for DG set of capacity 32 KVA TO 82.5 KVA including testing complete all as specified and directed.

Supply & replacement of lead acid battery 12 volt 180 AH 25 plate including initial charging at various DG sets complete all as specified and directed.

Draining out old used lube oil from engine sump, cleaning of sump and supply & filling new lubricating oil SAE grade (20 w 40) multiviscoscity complete all as specified and directed.

Supply and top up coolant/replacement of coolant by new coolant suitable for ambient temp from 15 to 40 degree centigrade complete all as specified and directed.

Supply & pouring distilled water superior grade all as approved complete all as specified and directed

S&F turbo charge with all accessories suitable for DG set Make-kirloskar/ cummins or others complete all as specified and directed. Make - Auto lac suitable for 32 KVA TO 82.5KVA

M&L for dismantling and transporting to contractor's work shop of alternator by opening of nut bolts of base plate and coupling opening of front and rear cover removing of fan and removing of armature, repair/rewinding of alternator by super enameled insulated copper wire as per existing gauge, insulating materials, varnishing, drying in hot oven up to desired temperature assembling and testing on connected load complete all as specified and directed by Engineer in charge of Cap32 KVA to 82.5 KVA.

Material & labour for preparation of old painted surfaces by removing of dust and dirt by caustic soda or any other means, painting of DG set CAP.32 KVA to 82.5KVA of various capacity complete alternator & engine parts as per colour code by spray painting applied two coat of synthetic enamel paint over existing painted surface and marking of SM/MES No on the sets as per approved colour complete all as specified and directed.

Supply of spares part for DG Set replacement Cap 32 KVA to 82.5 KVA complete all as specified and directed.

a) Fuel filter ( Primary & Secondary)

b) Oil Filter

c) Air Cleaner

d) By pas filter

e) Super bypass filter

f) Hose pipe set for Kirloskar 32 KVA to 82.5 KVA

h) Fan belt suitable for 32 KVA To 82.5KVA Kirloskar/Cummins

j) Banjo bolt off sizes

k) Screen filter

l) Fuel Injector pipe for 32 KVA To 82.5KVA

n) Injector nozzles for 32 KVA To 82.5KVA

O) Injector plunger and plunger spring for 32 KVA To 82.5KVA

p) Cylinder liner for 32 KVA To 82.5KVA

q) Piston with gugen pin & bush for 32 KVA To 82.5KVA

r) Inlet and Exhaust valve, 32 KVA To 82.5KVA

s) Tappet bush with packing 32 KVA To 82.5KVA

t) Valve guide and spring, 32 KVA To 82.5KVA

u) Piston rings

v) Alternator booster panel with AVR system and control unit with all asseceries for 32 KVA To 82.5KVA alternator

Supply & replacement of self starter 12 volt suitable for 32 KVA To 82.5KVADG Set complete all as specified and directed.

Taking out of burnt out AVR system of DG set by opening of connection chamber of alternator dismantling all existing electric/electronic connection replacement of AVR set reconnection checking of all circuit, testing the same up to the satisfaction of Engr in Charge for cap 32 KVA To 82.5KVA complete all as specified and directed.

M&L for taking down unserviceable self starter 12 volt from DG Set transporting to contractor workshop dismantling pinion etc , rewinding of armature and field coil by suitable size of insulated copper wire, to achieve its original performance, varnishing, replacement of pinion, pinion spring, carbon brush etc reassembling the same, testing and refitted with DG Set and testing complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement of solenoids switch for auto on off manual mode in the engine operation including wiring complete all as specified and directed by Engineer -charge

Supply and fixing in replacement of solenoids switch for auto on off manual mode in the engine operation including wiring complete all as specified and directed by Engineer -charge

Dismantling the water body pump assembly complete from the DG set of capacity 82.5 KVA to 250 KVA at site and transporting to work shop & testing and carrying out the following and brought back at site and fixing the same. (a) Over hauling of water body pump complete - 01 Job, (b) Supply and fix water body kit complete- 01 Set, (c) water body bearing - 02 Nos, (d) water body Hose- 01 Set,

Supply only battery terminal heavy duty made out of brass suitable for 12 volts lead acid battery all as specified.

M&L for replacement of horness cable control wiring and testing complete all as specified and directed

S&F off load change over switch cap 100 Amps 4 pole 415 Volts by addition/alteration in existing wall complete all as specified and directed by Engineer-in-Charge.

S&F off load change over switch cap 200 Amps 4 pole 415 Volts by addition/alteration in existing wall complete all as specified and directed.

M&L of HRC fuse 4-10 amps etc complete for DG sets installed at various pockets under AGE E/M EXT(ELECT) all as specified and directed. Note:- Spare required for repairs shall be measured & paid separately as supply only.

Supply & fix in repairs electronic control timer type ET-100 of suitable capacity as required at site complete all as specified and directed. Make:- L&T/ABB/ Legrand/ AE/Secure.

Supply & fix in repairs engine starter relay of suitable capacity as required at site complete all as specified and directed. Make:- L&T/ABB/ Legrand/ AE/Secure.

Supply & fix in repairs under voltage relay complete all as specified and directed (Make:- PIC / EC / Wader.)

Supply & fix in repairs 8 / 11 pin relay complete all as specified and directed. (Make:- PLA.)

Supply and fixing in repairs crocodile clip for battery chargers of required size all as specified and directed.

S&F of 03 Pole Power Contractor -Type MNX-185 complete all as specified and directed.

S&F of 4 Pole Power Contractor -Type ML-06 complete all as specified and directed.

S&F of Single Phase Preventer Relay + Timer 415 Volt complete all as specified and directed.

S&F of DIN Type Fuse Link Type HN Suitable for up to 200Amps complete all as specified and directed.

S&F of Push Button Pendants 06 Amp, 415 V,50Hz with 02 push buttons complete all as specified and directed.

M/s KCL Engines and Machines

M/s ARPIT ENTERPRISES

Sanjay Traders

Sanjai sales and services

Ajanta Associates