Shifting of Tubular/Octagonal Poles/High Mast with Led Lights in UIT Area. (ARC) 9408

Amount

Supply and erection of 1000mm Double arm Bracket 500mm overhang both side. Fixture is made of Mild Steel Pipe with decorative embellishment. ( as per the attached drawing).Bracket will be fixed as per attached drawing height of pole.

Supply and erection of MS galvanized Decorative pole as per approved design (attached) total height of the pole is 7mtr having having different profile with cast aluminum housing embellishment .Bottom profile 1000mmx140mmx4.8mm and top profile 5000mmx90x4.8xmm and top profile 5000mmx90mm*4.0mm. Pole has a service window and fixed base plate at bottom profile. Pole is primer coated and PU painted. Pole is suitable for double arm bracket, including foundation work and installation by all means.

P&I of IP65 protected ornamental 90watt LED drop down luminaire made of aluminum housing duly PU painted with PC/PMMA clear/frosted diffuser for high luminance/glare free lighting. Fixture made of powder coated die cast aluminum housing with UV stabilized PC diffuser. The System level Luminous efficacy >90 Lumen/W. Input Voltage range of 90-270V AC at 50Hz. System life of 50000 burning hours with 70% of Initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. MCPCB of Osram LEDs and Philips driver .

Supply of and erection Decorative MS pole as per approved design (attached) total height of the pole is 5mtr ,Bottom Section 1000mmx137mm and top section 4000mmx76mm with aluminium emblishmaent as per drawing . Pole is suitable for Single/Double arm bracket. Complete pole a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole, square base plate having : 200x200x10mm base plate on the cement conc

Supply of and erection Decorative MS pole as per approved design (attached) total height of the pole is 3mtr ,Bottom Section 1000mmx109mm and top section 2000mmx89mm with aluminium emblishmaent as per drawing . Pole is suitable for Single/Double arm bracket. Complete pole a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole, square base plate having : 250x250x10mm base plate on the cement conc

Supply of and erection Decorative MS pole as per approved design (attached) total height of the pole is 8mtr ,Bottom Section 5200mmx134mm and Middle section 1500mmx109mm and Bottom section 1300mmx89mm with aluminium emblishmaent as per drawing . Pole is suitable for Single/Double arm bracket. Complete pole a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole, square base plate having : 350x350x

Painting over the existing Decorative poles above ground level including overhang making surface well clean and apply PU Paint coats paint approved brand and manufacture to give an even shade as approved with required T-P etc as required. One or more coats on old work Pole of 3 to 5 mtr long

Painting over the existing Decorative poles above ground level including overhang making surface well clean and apply PU Paint coats paint approved brand and manufacture to give an even shade as approved with required T-P etc as required. One or more coats on old work Pole of 5 to 8 mtr long

Supply and erection of 2000mm Double arm Bracket 1000mm overhang both side. Fixture is made of Mild Steel Pipe with decorative embellishment. Bracket is provided for suspension of decorative fixture. Bracket is Made of Mild steel Pipe with decorative emblishment of gravity casted dye product.Bracket will be fixed as per attached drawing height of pole. (Design as per the attached drawing)

P&F of IP-65 protected ornamental 60watt LED dropdown luminaire made out of aluminium housing duly powder coated/PU painted with PC/PMMA,clear/frosted diffuser for high illuminance/glare free lighting. High lumen 60 w leds are directly mounted on aluminium heat sinks.. Dimension and design as per drawing attached . led bulb make- philips bajaj surya . Dropdown luminaire make bajaj, valmont, klite, twinkle lite.

Supply and fixing Highmast Safety Guard of M.S. channel 100x50mm ISMC (9.5Kg. Per Mtr.) achive to Proper Defth 6x1.4mtr. long with pilot patti 50x6mm thick necessary with pit pcc and M-10 CC Grade Foundation etc with two coats of Red oxide and two coats of Aluminium paint etc. as Required.All as perpre approved by Engineer inspecification &charge.

Provideing amd Fixing Aluminium Housing High Pressure die cast Al for 72W ,Diffuser Toughen Glass Optical Grade Clear PC / PMMA ,IP65,Optical Compartment ,Colour - Graphite Grey -Any Other RAL Colour on Request & Confirmation, High Bright LED are Samsung/Cree/Nicha/Oshram/ Seoul /Phillips/Bridgelux or Eqvivalent,LED CCT Initial - 5700K ± 500K ,LED CRI Initial - ≥70,Optices Type II ,Power Efficiency - ≥85% ,Power Factor* - ≥0.95 - Surge protection - 5KV ,Operating Input Voltage Range - 140-270V ,ATHD* - ≤10% • External Surge Protection** - 10KV • Electrical Safety Class - I ,Nominal Input Volt

P&F of LED Rope light Water proof & weather proof round LED neon flex type LED having 6 or more watts/meter capacity and consisting suitable power adapter All as perpre approved by Engineer inspecification &charge. Colour R,Y,B,G,Tri Colour as required.

Existing Pole Arm Cut By Cutter Machine and with required T & P etc as required Supply and Fixing of Pole MS Overhang Decorative ARM with cap over and poles colour as per the direction of Engineer incharge complete as required of following height & designation. All as per pre approved by Engineer in charge.as Per Attached Drawing . Single Arm overhang

Existing Pole Arm Cut By Cutter Machine with required T & P etc as required and Supply and Fixing of Pole MS Overhang Decorative ARM with cap over and poles colour as per the direction of Engineer incharge complete as required of following height & designation. All as per pre approved by Engineer in charge.as Per Attached Drawing . Double Arm overhang

Painting over the existing panel including Frame level making surface well clean and apply two coats of aluminium/ enamel paint as approved with required T & P etc as required.Street Light & Feedar Panel.

Painting over the existing poles above ground level including overhang making surface well clean and apply two coats of aluminium/ enamel paint as approved with required T & P etc as required. with one overhang each 10-12 Mtr

Painting over the existing poles above ground level including overhang making surface well clean and apply two coats of aluminium/ enamel paint as approved with required T & P etc as required. with two overhang each 10-12 Mtr

:Painting over the existing poles above ground level including overhang making surface well clean and apply two coats of aluminium/ enamel paint as approved with required T & P etc as required. Pole of 7 to 9 mtr long with one overhang each

Painting over the existing poles above ground level including overhang making surface well clean and apply two coats of aluminium/ enamel paint as approved with required T & P etc as required. Pole of 7 to 9 mtr long with two overhang each

Supply and erection of 1000mm single arm Bracket 1000mm overhang . Fixture is made of Mild Steel Pipe with decorative embellishment. ( as per the attached drawing).Bracket will be fixed as per attached drawing height of pole.

Bidder Name

Amount

PRAKASH LIGHT HOUSE(GSTN-08AAVPJ3677K1ZV)

M/s National Electric Stores(GSTN-08AAAFN8270D1ZD)

PRAKASH LIGHT HOUSE

M/s National Electric Stores