Renovation of Inspection House and Reconstruction of Type-1 Building and Boundary wall at Mujuri in District Maharajganj

Amount

Renovation of Inspection House and Reconstruction of Type-1 Building and Boundary wall at Mujuri in District Maharajganj

CIVIL WORK

Dismentaling C.C. or brick or granolithic floor including base concrete and including stacking of dismentled material within 60m distance.

Dismentaling reinforced cement concreate including stacking of dismantled material with in 60m distance.

Dismentaling brick work or stone work and cement concrete in line or cement mortar and including stacking of material with in a istance of 60M as per direction of Engineer-incharge.

Dismentaling of Door Window chaukhat with hold fast including stacking of material up to 60M.

Dismentaling of Door Window leaves including stacking of material up to 60M.

Dismentaling existing plaster including disposal of refuse with in distance of 60M.

Brick work in 1:4 cement and course sand of 2.25 fineness modulous mortar in foundation and above plinth including supply of all materials, labour and Tools and Plants etc. required for proper completion of work.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes

12 mm thick plaster with cement mortar inproportion of 1:3 cement and sand of 1.25 F.M. over brick work minium thickness not be less than 10 mm including supply of all materials,labour and T&P etc.required for proper, comletion of work.(As per Irrigation Rate Analysis)

12 mm thick plaster with cement mortar consisting of 1 part cement and 6 part fine sand 1.25 F.M minimum thickness not to be less then 10mm including supply of all materials labour and tools and plants etc. required for proper completion of work.

12 mm thick plaster with cement mortar inproportion of 1:4 cement and sand of 1.25 F.M. over brick work minium thickness not be less than 10 mm including supply of all materials,labour and T&P etc.required for proper, comletion of work.(As per Irrigation Rate Analysis)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing & laying wire mesh in OTS area concrete

RCC on OTS area of M20 Grade (1:1.5:3) with 10 mm down aggregate

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size - 600 X 600 mm

Providing and laying Vitrified tiles in different sizes (600 MM X600 MM) & thickness to be specified by manufacturer, with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. comple

Supply and fixing 6mm thick CHINA white glazed tiles (ceramic tiles) in flooring skirthin or dado with 1:3 cement and approced coarse sand working and the joints finishing with white cement slurry, jointing and polishing complete including supply of all materials and wastage labour tools and etc. Required for the proper completion of the work.

Providing and fixing of 18 mm thick gang saw cut mirror polished(premoulded and prepolished) machine cut for kitchen plateforms,vanity counters,window sill, Facia and other similer location of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4(1Cement :4 Coarse Sand ) with joint treated with white cement,mixed with matching pigments,epoxy touch up, including rubbing,curing, moulding and polishing to edge to high gloss finish etc.complete at all level. Granite of any colour and shades (Area of slab over 0.50 Sqm)

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two Coat

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with two or more coat

Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001 (Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length

Supply and fixing of 32 MM thick flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally.

Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: 30.mm thick

Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 andTADS 15:2001 (Part B), using 4 mm thick float glass panes for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, all as per directions of Engineer-in-charge

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (250x16mm)

Providing & fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (On wood or Iron surface)

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. (For the purpose of measurement the entire treated surface will be measured.)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

E/w in foundation including digging and refilling the trenches with its proper disposal within 30 meters lead and 1.50 m lift.

Laying C.C. 1:4:8 with cement,coarse sand stone bllast including all cost of materials,T&P and labours etc.

Centering and shuttering for R.C.C. & C.C. work including all cost of materials,T&P and labours etc. finished.

1st class brick work in foundation 1:6 cement mortar including all cost of materials,T&P and labours etc.

Earth Filling in plinth

Reinforced Cement Concrete 1:1.5:3 (Cement, coarse Sand and dalla grit) in column and plinth beam including all cost of materials,T&P and labours etc.finished including cost of steel complete.

Mild steel or iron in plain work such as reinforcement concrete or Reinforcement brick work (when not included in an over all rate) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks.

Providing and fixing T-iron frames for ors, windows and ventilators of mild steel Tee-sections, joints mitred and lded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1Cement : 3 coarse sand : 6 graded tone aggregate 20 mm nominal size).

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frameto be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. Thehinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge Extruded section profile size 48x40 mm

Providing and fixing factory made ISI marked steel glazed doors, windows andventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including oviding and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to steel windows by welding.

Laying of 25 mm thick KOTA STONE of size 45 x 45 cm and above flooring over previously prepared base with 2 cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of E/I including cutting polishing with wax polish including supply of all materials T&P etc required for proper completion of the work.

Laying of 25 mm thick KOTA STONE of size 45 x 45 cm and above flooring over previously prepared base with 2 cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of Engineer-in-charge including cutting polishing with wax polish including supply of all materials T&P etc required for proper completion of the work.Same as above but in Skirting/dado with 25 mm thick stone

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and railsmitred and joint at the corners by means of M.S. galvanised/ plasticbracketsofsize75x220mmhavingwall thickness 1.0 mm and stainless steelscrews.Thestylesoftheshutterreinforcedbyinsertinggalvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm)wallthickness, fixed to theshutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mmgalvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter)

Providing and laying "Brick Coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other , over 20mm thick base of cemet mortor 1:4 cemet and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortor mixed with water proofing compoud in 1:4 cement and coarse sand mortor finished smooth and top mashed false square 30cm x 30cm and side wall parapet shall be mono tythic plaster wall upto 30cm height and junction and corner shall be rounded by bbrick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & includig S/o all material , labour T & P etc. copmlete for proper completion of work.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC10 as per IS : 1868 ) transparent or dyed to requiredcolour orshade,withnecessary screwsetc.complete : 100x10 mm

Providing and fixing of precast presterssed 6 feet height boundary wall consisting of 150 X 150 mm vertical I section post and 2100 X 300 X 50 mm panel of presterssed concrete M25, reinforced with 4 mm high strength tensile steel wire complete as direction of Engineer in charge.

Supplying and fixing of steel gate size 12 X 7 feet of I.H. Campus for Steel work welded in built up sections/ framed work, including cutting, hoisting, In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

12 mm thick Plaster in 1:4 C.M. including all cost of materials,T&P and labours etc.

Providing and laying of cement concrete with 1:1.5:3 , cement : coarse sand : stone aggregate or M-20 for recast post embded with concrete in cost of all material T&P and labour etc complete. For casting foundation of post size 450x450x800 mm

Supply and fixing galvanized mosquito heavy quality iron wire gauge of expanded metal heavy quality our windows and including C.P.teak wood battens 3cmx10cm with servers and including supply of all in materials, labour and tools and plants etc. required for proper completion of work.

Providing and fixing panes of glass with Atul or equivalent I.S.I. marked quality putty. Brads and springs complete including cost of material & labpour etc. (5 mm thick)

Electrification work

Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 Amodular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providng andfixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 Amodular switch, connections etc. as required. (For light plugs tobe used in non residential buildings)

Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate formodular switches in recess etc.as required.8 Module (125mmX125mm)

Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate formodular switches in recess etc.as required. 6 Module (200mmX75mm)

Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate formodular switches in recess etc.as required. 4 Module (125mmX75mm)

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. asrequired.(But without MCB / RCCB / Isolator) 8 way , Double door

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. asrequired.(But without MCB / RCCB / Isolator) 12 way , Double door

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, inter connections, powder painted including earthing etc. asrequired.(But without MCB / RCCB / Isolator) 16 way , Double door

Supplying & fixing suitable size GI box wih modular plate andcover in front on surface or in recess including providing andfixing 25 A modular socket outlet and 25 A modular SP MCB, "C"curve including connections, painting etc. as required (AC point)

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (DB to SB)

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (DB to Power)

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (DB to AC)

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 16 sq. mm + 1 X 6 sq. mm earth wire (Panel to Power DB)

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire (Panel to Light DB)

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.40 A

Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.63 A

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required. Single pole

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking rrangement and watering pipe etc.with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mmsweep,BEE 5 star rated, ceiling fan withBrush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod, 2nos. canopies, shackle kit, safetyrope, opperwinding,PowerFactor not less than0.9,ServiceValue(CMM/W) minimum 6.85,Air delivery minimum 215 CMM,350 RPM (tolerance as per IS : 374-2019), THDlessthan10%,remoteor electronic regulator unit forspeed control and all remainingaccessories including safety pin,nut bolts,washers, temperaturerise=75 degree C (max.), insulationresistance more than 2 mega ohm,suitable for 230 V, 50 Hz, singlephase AC Supply, earthing etc.complete as required.

Supplying and fixing of following Energy Efficient LED Batten Luminarie, minimum length 1150mm with a minimum nominal system lumen output of 2000 lumens and a minimum system efficacy of 110 lm/W, SMD LED Chip as per LM 80/IS16106, IK08,. The luminaire shall have a rated system lifetime of 50,000 burning hours, CRI>80, THD <10%, PF > 0.95, CCT 6500K/5700K, rated voltage 140-270 volts, The luminaire housing should made of extrusion/die cast Al/CRCA with a PC cover. Including connection with 1.5 sqmm FRLS PVC insulated copper conductor single core cable i/c testing etc as reqd, min IP-45.

Providing & Installation of 250 mm sweep plastic body Energy Saving with BLDC Motor fresh- air fan in the existing opening, i/c making good the damage, connections i/c supplying & fixing the louvers/shutters complete with frame, testing, commissioning etc. as reqd.

Supply, Installation, Testing and Commissioning of LED Bulkhead luminarire with a system lumen output not less than 700 lumens and a minimum system efficacy of 105 lumen/watt. The luminaire shall have a wattage <6.5W, 6500/5700 K, CRI >80, rated voltage 140-270 volts, Housing should be extrusion Al./die cast Al/CRCA with a PC/glass cover., minimum IP65 Protection against dust and water with IK08 , i/c connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc as reqd .

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, completeas required.

Supplying and fixing two module stepped type electronic fan regulator on the existingmodular plate switch box including connections but excluding modular plateetc.asrequired.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular witches in recess etc.as required. 1 or 2 Module (75mmX75mm) BOX

Supplying and fixing following modular switch/ socket on the existing modular plate& switchboxincludingconnections but excluding modular plate etc. as required.Telephone socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.TV antenna socket outle

Supplying and fixing following modular switch/ socket on the existing modular plate& switchboxincludingconnections but excluding modular plate etc. as required.Bell push

Supplying and drawing following pair 0.5mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/recessed steel/ PVC conduit asrequired.2 Pair (Telephone wire)

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mmsolid copper conductor PE insulated, shielded with fine tinnedcopper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. (TV wire)

Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work

PLUMBING WORKS

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. viterous china flushing cistern & CP flush bend with fitting and CI Brackets, 40mm flush bend, overflow arrangement with special of standardmake and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required :: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 225 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia

P/F 600 X 400mm leveled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestors sheet ground fixed to wooden cleats with C.P. brass screws and washers

P/F in position C.P. brass towel rail complete with brackets including gchases in wall and repairing the same in 1:3 CM complete. Size - 750 X 20 cm.

Fixing C.P. Brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleeves with C.P. Brassscrews.

P/F C.P. Brass toilet paper holders including cost of all materials, labours T&P etc.

Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing terminal guard : 100 mm Sand cast iron S&S as per IS - 3989

Providing and fixing cast iron collar. For 100 mm dia pipe

Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : For 100 mm

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet

P/F C.P. jali for nahani trap 100mm dia including cost of all materials

Providing and fixing on wall face unplasticised –rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion.Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm Bend

Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1cement : 4 coarse sand ) and making good the wall etc. Complete. 110 mm diameter

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (a) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : (a) 100 mm diameter S.W.Pipe

P/F square mouthed S.W. gully trap I.S. 651 (Grade-A) complete with C.I. gratin brick masonry chamber and water fight C.I. cover frame 30 x 30cm size (inside) the weitht of cover to be not less than 4.53 kg. and frame be not less than 2.72 kg. as per standard design including excavation etc. complete.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

P/F Concealed Galvanized mild steel tube (medium grade) IS :1239 (Part-I) 1979 complete with fitting and clamps, including cutting and making goods the wall etc complete. (External work)

P/F Concealed Galvanized mild steel tube (medium grade) IS :1239 (Part-I) 1979 complete with fitting and clamps, including cutting and making goods the wall etc complete. (Internal work) 15 MM

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15mm nominal bore

P/F C.P. brass angle valve for cistern , wash basin,Gyeser etc 15mm nominal hole size including cost of all materials, labour T&P etc.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

P/F chromium plated shower rose with 15mm or 20mm inlet complete and 100mm dia.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm dia nominal bore

Proving and Fixing of 25mm dia ball valve (Brass) of approved quality,high or low pressure with plastic floats.

Fixing 15mm PVC connection, heavy quality with brass Union including supply of all materials, labour T&P etc. required for proper completion of the work.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing / fixing 15mm nominal hole size C.P. stop cocks.

Proving and Fixing of 20mm dia ball valve (Brass) of approved quality, high or low pressure with plastic floats.

Providing, Laying and fixing inj position salt glazes S.W. full round pipe , IS:651 (grade-A) with 1:2 cm with spun yarn or gasket laid under ground over 15cm C.C. 1:4:8 and in cased in proper gradient including excavation of trenches up to 2m depth (150mm dia)

Constructing Septic tank (20 User Size 2.30X1.10X1.80) with brick work in cement mortar 1:4 (1 cement and 4 coarse sand), cement concrete 1:2:4 (1cement, 2 coarse sand, 4 graded stone aggregate 20 mm. nominal size ) in foundations/base, baffle walls in half brick masonary in 1 : 4 (1 cement : 4 coarse sand), RCC slab 1:1.5:3 (1 cement, 1.5 coarse sand, 3 graded stone aggregate 20 mm. nominal size ) 12 mm. thick cement plaster 1:3 (1 cement, 3 Coarse sand ) inside finished with a floating coat of neat cement. The rate includes all necessary excavation in all kind of soils, refilling and disposal of surplus earth with in the site or away from site as directed with out any extra cost including centering, shuttring etc. complete with required Nos heavy duty SFRC type MH/IC covers and frames, vent pipe and all other assessories as directed at site by the Engineer in Charge.

Making soak pit 2.5 m. diameter and 3 m. deep with 45 x 45 cm dry brick honey comb shaft with F.P.S bricks and SW drain pipe complete as directed at site by the Engineer in Charge.