Loading
Loading…
Loading…
Tender Value
₹12.1 Cr
EMD Value
₹24.2 L
Closing Date
12 Jun 2026, 11:30 amClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
TENDER
14 conditions · 2 needing a document upload
10.2.The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where. V=Advertised value of the tender in crores of Rupees. N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turn over. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported byAudited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. b(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows. The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as
Defination of Similar Work :- Execution of Panel Interlocking or Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Alteration to Existing Panel Interlocking / Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Provision of IBS works in panel Interlocking or Electronic Interlocking sections. OR Provision of Automatic signalling with Axle counter/Track circuits or both together. OR Provision of UFSBI/BPACs/Digital Axle counters at Panel Interlocking stations/Electronic interlocking stations.
8 conditions · 6 needing a document upload
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 10 CRORES, The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI of IRSGCC 2019. NOTE: i)The Tenderer(s) shall furnish the details of existing commitments and balance amount of ongoing works with tenderer as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started upto the date of opening of tender. In case of no works in hand, a 'NIL' statement should be furnished. This statement should be submitted duly verified by Chartered Accountant. (ii) In case, the tenderer/s failed to submit the above statement along with offer, their/his offer shall be considered as incomplete and will be rejected summarily. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer has to go through the General Technical Conditions and Specifications and Drawing as stipulated in Annexure - XVII of the Tender Document and comply.
As per GCC Clause 14.0 Documents to be Submitted Along with tender. (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the Constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
i) Following documents shall be submitted by the tenderer: (a)Sole Proprietorship Firm: (i) All documents in terms of Para 10of the Tender Form (Second Sheet) above. HUF: (ii)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (iii)All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. (c) Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). (d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet). (e) company registered under Companies Act 2013: (i)The copies of MOA(Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company(backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) above. (f) LP Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: (v)A copy of LLP Agreement (vi) A copy of Certificate of Incorporation (vii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (viii)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/ members. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (ix)All other documents in terms of Para10 of the Tender Form (Second Sheet). (g)Registered Society &Registered Trust: The tenderer shall submit: (x)A copy of the Certificate of Registration (xi) A copy of Memorandum of Association of Society/Trust Deed (xii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (xiii)A copy of Rules & Regulations of the Society. (xiv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above (iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having.
15. The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Apostille certificate
As per GCC Clause No.18.10 The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. The following documents shall be submitted by the partnership firm, with the tender: (i) A notarized copy of partnership deed or a copy of the Partnership deed registered with the Registrar.. (i) A notarized or registered copy of Power of Attorney (duly registered as per prevailing law) in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (ii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry/Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract.
As per GCC 2022): The tenderers shall submit a copy of certificate stating that all their statements/ documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V (Annexure-V of GCC April 2022). Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid (Clause 6.1 of GCC2022 PART-I) ( Click here to download Format)
Hyderabad Division: (1) Cavalry Barracks - Replacement of Panel interlocking both indoor and out doot by Electronic Interlocking System at Cavalrybarracks stations in connection with provision of EI at balance stations on HUN/HDN routes where Kavach/ABS/CTC is sanctioned & (2) Signalling arrangement in connection with Lallaguda Gate Halt: Provision of stabling lines at Lallaguda Halt station.
Y-SG-36-2026-27-06
Y-SG-36-2026-27-06
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹24.2 L
12 Jun 2026
21 May 2026
29 May 2026
409 items across 11 schedules · ₹12,11,52,981.7 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of 4.5m long CLS Post 140mm dia to Specn No. IRS:S 6-81 Rev.3 or latest (Inspection: RITES) | Numbers | 9.00 | 4,710 | 42,390 |
| 2 | Supply of 3.5m long CLS Post 140mm dia to Specn No. IRS:S 6-81 Rev.3 or latest (Inspection: RITES). | Numbers | 4.00 | 4,442 | 17,768 |
| 3 | Supply of CLS Ladder set complete with staging/ platform, supports, cast iron ladder base/Shoe - Ladder for 4.5m post as per Drg No. SA 23153, S 2033 or latest (Inspection: RITES). | Set | 9.00 | 6,432 | 57,888 |
| 4 | Supply of CLS Ladder set complete with staging/ platform, supports, cast iron ladder base/ Shoe - Ladder for 3.5m post as per Drg No. SA 23150, S 2033 or latest (Inspection: RITES). | Set | 4.00 | 5,226 | 20,904 |
| 5 | Supply of Surface Base 140mm Dia CLS post as per Drg No. S 2011/M (Inspection: RITES). | Numbers | 13.00 | 3,476 | 45,188 |
| 6 | Supply of Metallic (MS) colour light Signal Unit 2 aspect complete as per Drg No. SA. 23003/A/M (Adv.) with latest amendment and Specn No. IRS: S 26-64 or latest (Inspection: RITES). | Numbers | 3.00 | 12,998 | 38,994 |
| 7 | Supply of Metallic (MS) colour light Signal Unit 4 aspect complete as per Drg No. SA. 23001/A/M (Adv.) with latest amendment and Specn No. IRS: S 26-64 or latest (Inspection: RITES). | Numbers | 9.00 | 18,820 | 1,69,380 |
| 8 | Supply of Offset Bracket to suit 140mm Dia CLS post with two numbers of U bolts and nuts complete (Inspection: RITES). | Numbers | 6.00 | 4,938 | 29,628 |
| 9 | Supply of Calling On Signal Unit complete with U Bolts as per RDSO Drg No. SA.24351 (Adv.) or latest (Inspection: RITES). | Numbers | 2.00 | 4,740 | 9,480 |
| 10 | Supply of Ground type position light shunt signal complete with base, pipe, arrow mark and hoods as per RDSO Drg No. SA 23840 or latest (Inspection: RITES). | Numbers | 8.00 | 6,083 | 48,664 |
| 11 | Supply of Post type position light shunt signal with hoods, arrow mark and offset bracket to suit 90mm sockets (CLS) with two numbers of 'U' bolts and nuts complete to fix shunt signal below main stop signal as per RDSO Drg No. SA 23840 or latest (Inspection: RITES). | Numbers | 2.00 | 3,502 | 7,004 |
| 12 | Supply of Junction type/Direction type route indicator as per Specn No. IRS:S 66- 84 Amd.1 or latest - One way as per Drg No. SA 23401 (Inspection: RITES). | Numbers | 2.00 | 15,187 | 30,374 |
| 13 | Supply of Junction type/Direction type route indicator as per Specn No. IRS:S 66- 84 Amd. 1 or latest - Two way as per Drg No. SA 23402 (Inspection: RITES). | Numbers | 1.00 | 20,490 | 20,490 |
| 14 | Supply of vitreous enamel coated board of 230mm Dia (A, P, G, C, IB markers) made of 2mm thick sheet as per following colour scheme: 1) 'G' marker - Yellow back ground, black letters 2) Other boards - White background, black letters (Inspection: Consignee). | Numbers | 10.00 | 267 | 2,670 |
| 15 | Supply of 280mmx102mmx2mm thickness vitreous enamel coating arrow markers board fabricated with MS clamp of size 40mmx6mm along with suitable bolts and nuts (Inspection: Consignee) | Numbers | 4.00 | 370 | 1,480 |
| 16 | Supply of Full size GKP type Location Boxes as per Drg No. S&T/MFT/T.2378 (Inspection: RITES). | Numbers | 47.00 | 16,216 | 7,62,152 |
| 17 | Supply of 'E' type lock of specified ward as per requirement with one key E-type lock to Drg No. SA3376/M or latest and Specn No. IRS: S30-64 or latest (Inspection: RDSO). | Numbers | 47.00 | 1,051 | 49,397 |
| 18 | Supply of relay fixing frame for full location box. The frame shall be of approximate size 940mmx150mm and made with powder coated MS angle of 25mmx25mmx 3mm. The frame shall have suitable holes to fix in full location box (Inspection: Consignee). | Numbers | 47.00 | 853 | 40,091 |
| 19 | Supply of Hylam Sheet of size 2400mmx1200mmx6mm, resin bonded, grade P3 as per IS Specn IS 2036 of 1974 or latest (Inspection: Consignee). | Numbers | 3.00 | 7,124 | 21,372 |
| 20 | Supply of Hylam Sheet of size 2400mmx600mmx6mm, resin bonded, grade P3 as per IS Specn IS 2036 of 1974 or latest (Inspection: Consignee). | Numbers | 3.00 | 3,430 | 10,290 |
| 21 | Supply of Hylam Sheet of size 2400mmx600mmx3mm, resin bonded, grade P3 as per IS Specn IS 2036 of 1974 or latest (Inspection: Consignee). | Numbers | 3.00 | 1,888 | 5,664 |
| 22 | Supply of GI termination box (10 SWG) for point machine of size 45 cmx23 cmx12 cm with double coat of enamel paint (outside: Black & inside: white) along with 2 Nos. of MS angle of size 50x50x6mm of length 1000 mm each, 2 numbers of 40mm GI pipe of length 450mm & 150mm with nuts/washers and teak wood plank of size 40mm x25 mm for fixing of terminals (Inspection: Consignee) | Numbers | 13.00 | 2,902 | 37,726 |
| 23 | Supply of Ground connections for point machines for universal point machine 143mm with 'D' type clamp for 52kg/60kg/90R rail as per Drg No. RDSO/S3267-74 (Inspection: RITES). | Set | 11.00 | 8,670 | 95,370 |
| 24 | Supply of Insulations for 'D' clamp switch extension bracket to suit to universal point machine as per Drg No. RDSO/ S3361-62 supplied by Rlys. One set consists of 'D' clamp insulation-2 Nos, Nylon insulation bushes - 4 Nos. and Nylon insulation washers-8 Nos.) (Inspection: Consignee). | Set | 11.00 | 729 | 8,019 |
| 25 | Supply of Drive lug insulation for universal point machine as per Drg No. RDSO/S 3361@45>46@ (One set consists of one number central insulation plate, bushes-2 Nos. and washer-4 Nos.) (Inspection: RITES). | Set | 11.00 | 160 | 1,760 |
| 26 | Supply of Insulations for ground connection for point machine comprising of the following: 1) Switch extension piece insulation -1 set (Each set comprising of S3265 -1 no; S 3266-1 No; S23199-2 No and S8640-4 Nos.) 2) Stretcher bar insulation-3 sets (Each set consisting of T10367-1 No., T10368-2 No., T10371-4 Nos.) 3) Gauge tie plate insulations-4 sets (Each set consisting of T 10372- 1 No., T10368 -3 Nos. and T10371-6 Nos.) 4) Drive lug insulation-1set (Each set consisting of S 8804 - 1 No., S 8813 -2 Nos. and S 8640-4 Nos.) complete with bushes. Note: The type of insulation required will be specified by Engineer in- charge of the work depending on the type of machine proposed (Universal/PTJ Make) as per specification (Inspection: RITES). | Set | 11.00 | 2,203 | 24,233 |
| 27 | Supply of Ground connection insulations for thick web switch layout facing point (BG) for 52 Kg/60 Kg rail fitted with high thrust point machine comprising of the following: 1. Bush as per Drg No. S3463- 1no. and Washer as per Drg No. S8640- 2no. for drive (throw) rod 2. Bush as per Drg No.S 23199-1no and Washer as per Drg No. S 8640-2no for short detector rod. 3. Bush as per Drg No.S 23199-1no and Washer as per Drg No.S 8640-2no for long detector rod. 4. Bush as per Drg No.S 22179-1no and Washer as per Drg No. S 8640-2no for short lock rod. 5. Bush as per Drg No.S 22179-1no and Washer as per Drg No .S 8640-2no for long lock rod. 6. Bush 'B' as per Drg No.S 8912 for LH lock slide-1 no. 7. Bush 'B' as per Drg No.S 8912 for LH lock arm-2 no. 8. Bush 'B' as per Drg No.S 8912 for RH lock arm - 2 no. 9. Bush 'B' as per Drg No.S 8912 for RH lock slide-1no. 10. Bush as per Drg No.S 23199 -4no and washer as per Drg No.S 8640-4no for LH lock slide. 11. Insulating Plate LH as per Drg No.S 3404 RDSO/S 3593- 1no. 12. Insulating Plate RH as per Drg No.S 3404 RDSO/S 3592- 1no. 13. Bush as per Drg No.S 23199-4no and washer as per Drg No. S 8640-4no for RH lock slide (Inspection: RITES). | Set | 11.00 | 1,074 | 11,814 |
| 28 | Supply of Track feed battery charger to work on 110V AC for charging 1 or 2 or 3 or 4 lead acid cell of 80AH (10 Amps) used in track circuit as per RDSO Specn No. IRS.S.89/2013 Ver 1.0 latest (Inspection: RDSO). | Numbers | 50.00 | 8,294 | 4,14,700 |
| 29 | Supply of Track lead junction boxes fibre glass as per Drg No. CWM-00597 of F.R.P material to and Specn IRS:S 23 along with fixtures i.e., one MS angle 50mmx50mmx5mm, 0.9m long, two numbers of GI pipes of 25mm Dia 500mm long along with nuts and bolts and 500 mm long (grommet bushes, 60 mm ARA terminals-2 Nos.) (Inspection: RITES) | Numbers | 210.00 | 1,546 | 3,24,660 |
| 30 | Supply of Galvanised Wire rope 6/19 steel, 6mm Dia with fibre core as per Specn IS 3459/2004 or latest (Inspection: RITES) | Metre | 500.00 | 80 | 40,000 |
| 31 | Supply of B type chokes to as per Specn IRS: S65- 83 Amd.1 or latest (Inspection: RDSO) | Numbers | 90.00 | 2,313 | 2,08,170 |
| 32 | Supply of 2V, 80AH Stationary low maintenance secondary lead acid cells as per RDSO Specn IRS: S88-2004 or latest. This includes supply of inter cell connectors, bolts, nuts, acid level indicating floats and vent plugs (Inspection: RDSO). | Numbers | 190.00 | 3,315 | 6,29,850 |
| 33 | Supply of Hydrometer as per IS: 3104 (Part II)-1982 or latest (Inspection: Consignee). | Numbers | 30.00 | 277 | 8,310 |
| 34 | Supply of Distilled water for topping of secondary cells as per Specn IS 1106 or latest (Inspection: Consignee) | Litre | 400.00 | 10 | 4,000 |
| 35 | Supply of Porcelain insulators for secondary lead acid cells (Inspection: Consignee) | Numbers | 170.00 | 30 | 5,100 |
| 36 | Supply of titanium coated 7.2 mm drill bits of Bosch/ Addision make (Inspection: Consignee) | Numbers | 50.00 | 146 | 7,300 |
| 37 | Supply of Channel bond pins 7mm Dia single groove as per Specn IRS: S 17-75 Amd.1 or latest (Inspection: Consignee). | Numbers | 300.00 | 3 | 900 |
| 38 | Supply of Track Feed Regulating Resistance disk type 0 to 30 as per Drg No. SA 20161 66/M or latest. To be procured from RDSO approved firms (Inspection: RDSO). | Numbers | 200.00 | 358 | 71,600 |
| 39 | Supply of Plug-in type miniature tractive armature Non-AC immune, DC neutral line relay complete with plug board, retaining clip/ATC Clip and connectors as per Specn BRS 930, IRS:S 23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest, IRS: S 67-85 Amd.3 or latest (as applicable) - QN1- 8F/8B, 24 V DC. The interlocking code: ABCDF (Inspection: RDSO). | Numbers | 120.00 | 4,400 | 5,28,000 |
| 40 | Supply of Plug-in type miniature tractive armature Non-AC immune, DC neutral line relay complete with plug board, retaining clip/ATC Clip and connectors as per Specn BRS 930, IRS:S 23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest, IRS: S 67-85 Amd.3 or latest (as applicable) - QN1- 12F/4B, 24 V DC. The interlocking code: ABCDE (Inspection: RDSO). | Numbers | 70.00 | 4,283 | 2,99,810 |
| 41 | Supply of 24V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest, IRS: S 60-78 Amd.1 or latest, IRS: S 67-85 Amd.3 or latest (as applicable) - QBCA1 - 2HF/4B, Interlocking Code: BCEJK as per Specn BRS 943 or latest (Inspection: RDSO). | Numbers | 35.00 | 8,307 | 2,90,745 |
| 42 | Supply of 24V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest, IRS: S 60-78 Amd.1 or latest, IRS: S 67-85 Amd.3 or latest (as applicable) - QNA1- 8F/8B, Interlocking Code: ABDGH as per Specn BRS 931 A or latest (Inspection: RDSO). | Numbers | 60.00 | 4,738 | 2,84,280 |
| 43 | Supply of 24V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest, IRS: S 60-78 Amd.1 or latest, IRS: S 67-85 Amd.3 or latest (as applicable) - QNA1-12F/4B, DC Neutral Line Relay, Interlocking Code: ABDFH as per Specn BRS 931 A or latest (Inspection: RDSO). | Numbers | 40.00 | 4,413 | 1,76,520 |
| 44 | Supply of 24V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest, IRS: S 60-78 Amd.1 or latest, IRS: S 67-85 Amd.3 or latest (as applicable) - QNA1K - 6F/6B, Interlocking Code: CDEKY as per Specn BRS 931 A or latest and RDSO letter No. STS/E/Relays/UEA (PI) dated 30/05/97 (Annexure-II) (Inspection: RDSO). | Numbers | 40.00 | 5,062 | 2,02,480 |
| 45 | Supply of 24V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest, IRS: S 60-78 Amd.1 or latest, IRS: S 67-85 Amd.3 or latest (as applicable) - QSPA1 - 8F/4B, The interlocking code: ABDEJ, Spec BRS 933A or latest (Inspection: RDSO). | Numbers | 55.00 | 6,465 | 3,55,575 |
| 46 | Supply of AC immune, plug-in type, Style 'QTA2', 2F/1B DC Neutral track relay for Rly signalling track circuits with coil resistance 9 ohm, complete with plug board, retaining clip and connectors as per Specns: BRS 939A & 966 or latest, IRS:S 23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest, IRS: S 67-85 Amd.3 or latest (as applicable) with interlocking code FGHKX (Inspection: RDSO). | Numbers | 55.00 | 4,806 | 2,64,330 |
| 47 | Supply of ECR 4F/4B' for 110V AC lit LED signals, complete with plug board, retaining clip and connectors as per RDSO Specn No. STS/E/Relays/AC Lit LED Signal/ 09-2002 Amd.1 or latest, BRS 941A, IRS: S 23-88 Amd.1 or latest, IRS: S34-68 Amd.6 or latest, IRS: S 67-85 Amd.3 or latest (as applicable). The interlocking code for this unit shall be ABDHK (with ATC clips) (Inspection: RDSO). | Numbers | 80.00 | 5,841 | 4,67,280 |
| 48 | Supply of Failsafe electronic flasher device 24V DC, 3A as per RDSO Specn No. RDSO/SPN/173/2002 Amd.2 or latest (Inspection: RDSO). | Numbers | 4.00 | 4,349 | 17,396 |
| 49 | Supply of Fail-Safe Electronic Time Delay Device mounted on Q series relay band enclosed within Q series relay cover complete with plug board, retaining clip and connectors as per Specn No. IRS: 61- 2000 Amd.3 or latest, IRS: S23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest IRS 67-85 (as applicable). The device shall work on 24V DC and shall give 24V DC output after the specified time delay - Time delay of 30 seconds. Interlocking code: AFLKY (Inspection: RDSO) | Numbers | 6.00 | 2,544 | 15,264 |
| 50 | Supply of Fail-Safe Electronic Time Delay Device mounted on Q series relay band enclosed within Q series relay cover complete with plug board, retaining clip and connectors as per Specn No. IRS: 61- 2000 Amd.3 or latest, IRS: S23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest IRS 67-85 (as applicable). The device shall work on 24V DC and shall give 24V DC output after the specified time delay - Time delay of 60 seconds. Interlocking code: AFHKY (Inspection: RDSO). | Numbers | 4.00 | 2,544 | 10,176 |
| 51 | Supply of Fail-Safe Electronic Time Delay Device mounted on Q series relay band enclosed within Q series relay cover complete with plug board, retaining clip and connectors as per Specn No. IRS: 61- 2000 Amd.3 or latest, IRS: S23-88 Amd.1 or latest, IRS: S 34-68 Amd.6 or latest IRS 67-85 (as applicable). The device shall work on 24V DC and shall give 24V DC output after the specified time delay - Time delay of 120 seconds. Interlocking code: AFGKY (Inspection: RDSO) | Numbers | 6.00 | 2,332 | 13,992 |
| 52 | Supply of powder coated Cable termination rack of size 880mmx2075mm made using 50mmx50mmx6mm (6mm thickness) MS angles. The cable termination rack shall be supplied with stainless steel nuts and bolts for fixing the rack, tripod bases and reel insulators (for K rack, P rack and power rack), cable ladder of 400mm width and 2075mm length with two angles of size 40mmx 40mmx5mm (5mm thickness) and supporting flats of size 25mmx 25mm. Suitable holes shall be drilled to fit hylam sheet as per standard practice (Inspection: Consignee). | Numbers | 5.00 | 7,585 | 37,925 |
| 53 | Supply of Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO Drg No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747 /Alt.5 and Specn IRS: S 75-2006 Rev.2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest (Inspection: RDSO). | Numbers | 300.00 | 97 | 29,100 |
| 54 | Supply of Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO Drg No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and Specn IRS: S 75-2006 Rev.2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest (Inspection: RDSO). | Numbers | 1000.00 | 406 | 4,06,000 |
| 55 | Supply of modular terminal block (WAGO or similar) as per RDSO Specn RDSO/SPN/189/2004 Ver.3.0 or latest consisting the following parts: a) 2 conductor disconnect terminal block - 6 numbers b) End/intermediate plate suitable for 2 conductor disconnect terminal - 1 number c) Screw less end stop similar to WAGO Model No. 249-117 - 2 numbers d) Insulated jumper WAGO Model 280-402 - 5 numbers e) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set) (Inspection: RDSO). | Set | 340.00 | 703 | 2,39,020 |
| 56 | Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos. (Inspection: RDSO). | Set | 300.00 | 64 | 19,200 |
| 57 | Supply of non-deteriorating type of fuse holders and fuse links 240V AC/DC as per Specn IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) - Fuse holder 20A capacity (Inspection: RDSO). | Numbers | 550.00 | 220 | 1,21,000 |
| 58 | Supply of non-deteriorating type of fuse holders and fuse links 240V AC/DC as per Specn IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) - Fuse link 1A/2A/6A/10A/ 16A/20A as specified by Engineer In charge (Inspection: RDSO). | Numbers | 700.00 | 31 | 21,700 |
| 59 | Supply of 60 core Indoor Cable with 0.6mm conductor diameter as per Specn IS 694: 2010 or latest, IRS: S 76-89 Amd.3 or latest (Inspection: RDSO). | Kilometre | 1.50 | 1,91,009 | 2,86,513.5 |
| 60 | Supply of PVC insulated Wire Coils Multi- strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) wire coil as per Specn IS 694:2010 or latest, IRS: S 76-89 Amd.3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge (Inspection: RDSO). (Unit : Coil) | Numbers | 350.00 | 1,153 | 4,03,550 |
| 61 | Supply of PVC insulated Wire Coils Multi- strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 0.30mm) flexible wire coil as per Specn IS 694:2010 or latest, IRS: S 76-89 Amd.3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge (Inspection: RDSO). (Unit : Coil) | Numbers | 19.00 | 2,908 | 55,252 |
| 62 | Supply of 35 Sq.mm PVC insulated multi- strand, single core, copper conductor 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd.3 or latest. Cable to be supplied in 100-meter coil. Colour to be specified by Engineer in charge (Inspection: RDSO). | Metre | 1100.00 | 391 | 4,30,100 |
| 63 | Supply of 16 Sq.mm PVC insulated, multi- stand, single core, copper conductor 127/0.4 (127 wires, diameter of each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd.3 or latest. Cable to be supplied in 100 meter coil. Colour to be specified by Engineer in charge (Inspection: RDSO). | Metre | 350.00 | 178 | 62,300 |
| 64 | Supply of 10 Sq.mm PVC insulated, multi- strand, single core, copper conductor 140/0.3 (140 wires, diameter of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd.3 or latest. Cable to be supplied in 100 meter coil (Inspection: RDSO). | Metre | 400.00 | 124 | 49,600 |
| 65 | Supply of 230V AC/110V DC Battery Charger, 30A single phase, Signalling/Telecom. installation as per Specn IRS: S 86-2000 Amd. 4 or latest (Inspection: RDSO). | Numbers | 2.00 | 1,10,464 | 2,20,928 |
| 66 | Supply of 230V AC/24-26-28V DC Battery Charger, 30A capacity as per Specn IRS: S 86-2000 Amd. 4 or latest (Inspection: RDSO). | Numbers | 1.00 | 55,373 | 55,373 |
| 67 | Supply of Transformer - Rectifier set with 230V AC input, 24V-30V DC output, 5A as per Specn IRS: S 91-2014 Ver. 1.0 or latest (Inspection: RDSO). | Numbers | 10.00 | 25,960 | 2,59,600 |
| 68 | Supply of Control and Distribution panel for Colour Light Signalling supply in 25KV AC traction system suitable to work on 3 supplies 25kVA AT, 240V AC single phase, 50Hz, 150A capacity Specn TI/SPC/PSI/ CLS/0020 with A & C Slip 1 to 4 or latest, CORE approved Drg No. ASCOS/25KVA/ CORE/2007/01 Rev.01 or latest. The panel shall have automatic changeover facility and shall be supplied with one additional rotary switch and meter. The panel shall be of Suntron or similar make (Inspection: Consignee). | Numbers | 1.00 | 2,27,480 | 2,27,480 |
| 69 | Supply of Data Logger with 1024 digital inputs and 32 analog inputs capacity for remote monitoring of signalling parameters and power supply arrangements with network as per Specn IRS: S 99-2006 Amd.3 or latest with 64 input digital card as a spare and fuse monitoring PCBs for monitoring at least fifty 2A fuses with inbuilt modem cards for networking (Inspection: RDSO). | Set | 1.00 | 6,23,709 | 6,23,709 |
| 70 | Supply of 200 way tag block as per Specn IRS: S 77/2006 Rev.1.0 or latest and Drg No. SA 24751 or latest (Inspection: Consignee). | Numbers | 2.00 | 1,439 | 2,878 |
| 71 | Supply of Protocol Converter for Electronic Interlocking including software required for networking (Inspection: RDSO). | Numbers | 1.00 | 49,373 | 49,373 |
| 72 | Supply of 80 column Dot Matrix Printer Model No. Epson LQ300/LX300 or similar with serial port (Inspection: Consignee). | Numbers | 1.00 | 13,177 | 13,177 |
| 73 | Supply of Safety Point Alarm unit to alert ASM to set the points against the blocked line (Inspection: Consignee) | Station | 1.00 | 69,582 | 69,582 |
| 74 | Supply of Thermo shrink jointing kit for jointing underground 0.9mm Dia conductor 6 Quad cable as per Specn IRS: TC 77-2012 Rev.3 (Amd.1 to Amd.3) or latest (Inspection: RDSO). | Numbers | 10.00 | 3,715 | 37,150 |
| 75 | Supply of Magneto Telephone with inbuilt battery, housing case, electro dynamic transducers as per IRS: TC 36-97 Amd. 2 or latest (Inspection: Consignee). | Numbers | 2.00 | 4,416 | 8,832 |
| 76 | supply of 4 wire train traffic control equipment with DTMF signalling way station equipment and way station control telephone as per Specn IRS:TC 60-2007 Amd.1 or latest (Inspection: Consignee). | Numbers | 2.00 | 5,617 | 11,234 |
| 77 | Supply of Desk type 2 wire, 12 way DTMF selective calling group telephone (Selective Calling /Group Telephone) complete as per Specn IRS: TC 80-2000 Amd.1 or latest with suitable power supply unit (Inspection: Consignee). | Numbers | 7.00 | 6,282 | 43,974 |
| 78 | Supply of Push button corded auto telephone with Caller ID facility of Beetel, Panasonic or Binatone make (Inspection: Consignee). | Numbers | 17.00 | 1,495 | 25,415 |
| 79 | Supply of Power Supply Unit for telecom installations of 2A output capacity as per Specn IRS: TC 72-97 Amd.1 or latest with 12V/7AH maintenance free battery (Inspection: Consignee). | Numbers | 10.00 | 4,265 | 42,650 |
| 80 | Supply of Switch board cable 5 Pair/0.6mm Dia as per TEC 68080:2002 or latest (Inspection: Consignee). | Kilometre | 0.50 | 17,649 | 8,824.5 |
| 81 | Supply of Switch board cable 10 Pair/0.6mm Dia as per TEC 68080:2002 or latest (Inspection: Consignee). | Metre | 200.00 | 35 | 7,000 |
| 82 | Supply of Switch board cable 20 Pair/0.6mm Dia as per TEC 68080:2002 or latest GR WIR 0603 March 2002 or latest (Inspection: Consignee). | Metre | 100.00 | 88 | 8,800 |
| 83 | Supply of PVC Twin (Tinned Copper Conductor, Double 'D' Type) cable as per standard TEC 68100:2003 or latest (Inspection: Consignee). | Kilometre | 0.50 | 9,623 | 4,811.5 |
| 84 | Supply of UTP CAT 6 Cable (Roll is 305 Mtr) of Make: D-Link /AMP/KRONE or better (Inspection: Consignee). | Metre | 305.00 | 37 | 11,285 |
| 85 | Supply of 20 pair Krone Termination Box complete with mounting (Inspection: Consignee). | Numbers | 2.00 | 1,492 | 2,984 |
| 86 | Supply of 50 pair Krone Termination Box complete with mounting (Inspection: Consignee). | Numbers | 2.00 | 2,469 | 4,938 |
| 87 | Supply of 100 pair Krone Termination Box complete with mounting (Inspection: Consignee). | Numbers | 4.00 | 3,740 | 14,960 |
| 88 | Supply of Krone insertion/extraction tool (Inspection: Consignee). | Numbers | 1.00 | 2,157 | 2,157 |
| 89 | Supply of 10 pair Terminal block of Wago Make or similar (with lever type disconnection & reconnection facility) duly fitted in C.T. box of approved quality, suitable for termination of cable from 0.4mm to 0.9mm conductor (Inspection: Consignee). | Numbers | 4.00 | 1,817 | 7,268 |
| 90 | Supply of 24 pair Terminal block of Wago Make or similar (with lever type disconnection & reconnection facility) duly fitted in C.T. box of approved quality, suitable for termination of cable from 0.4mm to 0.9mm conductor (Inspection: Consignee). | Numbers | 4.00 | 3,240 | 12,960 |
| 91 | Supply of Maintenance Free Batteries of 12V/65AH capacity of Amaraja/Exide/Panasonic or equivalent brand (Inspection: Consignee). | Numbers | 2.00 | 7,674 | 15,348 |
| 92 | Supply of Maintenance Free Batteries of 12V/75AH capacity of Amaraja/Exide/Panasonic or equivalent brand (Inspection: Consignee). | Numbers | 1.00 | 9,278 | 9,278 |
| 93 | Supply of Maintenance Free Batteries of 12V/100AH capacity of Amaraja/Exide/Panasonic or equivalent brand (Inspection: Consignee). | Numbers | 2.00 | 11,167 | 22,334 |
| 94 | Supply of Permanently lubricated HDPE Duct with outer diameter of 40mm and inner diameter of 33mm as per Specn RDSO/SPN/TC/45/2013 Revision 2.0. The length of the duct shall be 1km. Two end plugs shall be provided along with the drum (Inspection: RITES). | Kilometre | 3.00 | 66,223 | 1,98,669 |
| 95 | Supply of Plastic couplers - Slip fit/push type for permanently lubricated HDPE duct (Inspection: Consignee). | Numbers | 10.00 | 85 | 850 |
| 96 | Supply of End plug for permanently lubricated HDPE duct (Inspection: Consignee). | Numbers | 10.00 | 34 | 340 |
| 97 | Supply of Cable sealing plugs for permanently lubricated HDPE duct ((Inspection: Consignee). | Numbers | 10.00 | 43 | 430 |
| 98 | Supply of Rotary duct cutter suitable for cutting HDPE ducts of diameter 20mm to 42mm. The duct cutter shall have a facility of replaceable blades. The blades shall be of high carbon steel (Inspection: Consignee). | Numbers | 4.00 | 1,046 | 4,184 |
| 99 | Supply of appropriate OFC patch cords (1.5 meter long) as per direction of Engineer incharge, having insertion loss less than or equal to 0.1dB as per Telecommunication Engineering Centre (TEC) standard TEC 87070:2009 with GR TEC/T/OFC- OFJ/155/2013 or latest (Inspection: Consignee). | Numbers | 4.00 | 1,770 | 7,080 |
| 100 | Supply of OFC integrated access with following Specn.: 1. The device shall be of 1U or 1.5U height and shall be mountable in 19" rack 2. The device's optical module shall be integrated in the unit and shall support dual core OFC. 3. The device shall have four 100 Mbps Ethernet ports for surveillance/smoke detectors. 4. The device shall support an optical distance of up to 40km. 5. The device shall support six 2 Wire/4 Wire ports (each port shall be configurable) to support axle counter/ UFSBI/Control phone/EC/RTU applications, one TELNET /SNMP port, two RS232 ports and four potential free contacts. 6. The device shall support dual DC power supply from 18V DC to 72V DC. 7. The device shall support auto changeover feature on E&M interfaces from copper (quad cable) to optic medium (OFC) and vice versa. 8. The device shall have programmable option as required for each port (Inspection: Consignee). | Numbers | 1.00 | 2,40,421 | 2,40,421 |
| 101 | Supply of network 8 port switch with Ethernet and SFP port rg 45 10m network interface, product, delink model or similar, dgs-1008d (Inspection: Consignee). | Numbers | 4.00 | 2,300 | 9,200 |
| 102 | Supply of 2-conductor disconnect/test terminal blocks (WAGO) or similar with pivoting knife disconnect and test port as per Specn No. RDSO/SPN/189/2004 Ver.3.0 or latest. WAGO Model No. 280- 870 or similar (Inspection: RDSO). | Numbers | 200.00 | 52 | 10,400 |
| 103 | Supply of 3 in 1 modular crimping tool for RJ-45, RJ-11, CAT-5/CAT-6 Ethernet cable cutter crimping tool IMP make of Standard, D-Link, i-Ball, Belkin, Tech NXT, Fluke or Terabyte make (Inspection: Consignee). | Numbers | 1.00 | 574 | 574 |
| 104 | Supply of single line RJ11 Rosette box (Inspection: Consignee). | Numbers | 4.00 | 32 | 128 |
| 105 | Supply of Emergency Control Room Equipment as per Specn No. IRS: TC 61- 93 with Amd. 1 and 2 or latest (Inspection: Consignee). | Numbers | 1.00 | 35,761 | 35,761 |
| 106 | Supply of Ethernet to E1 Converter (Ethernet port to G.703) with four Ethernet ports to one E1. The converter shall have the provision of dual AC/DC power supply (Inspection: Consignee). | Numbers | 1.00 | 47,074 | 47,074 |
| 107 | Supply of basic material to construct unit Maintenance Free Earth as per Specn RDSO/SPN/197 Ver.1.0 or latest consisting of the following: a) Copper bonded steel electrode 3m long, 17mm diameter with copper bonding thickness mini 250 micron and UL listed and marked - 1 No. b) Earth enhancement compound of RDSO approved brand supplied in sealed bags of minimum 10kg - 3 Nos. c) Copper strip with dimensions 150x25x6mm to terminate earth rod - 1 No. d) Copper strip with dimensions 300x25x6mm Main Equi- potential Earth Bus bar (MEEB) - 1 No. e) Copper strip of with dimensions 150x25x6mm Sub Equi- potential Earth Bus bar (SEEB) - 1 No. f) 35 Sq.mm multi- strand PVC insulated Copper Cable (15 meter) (Inspection: RDSO). | Set | 17.00 | 16,837 | 2,86,229 |
| 108 | Supply of lightning and surge arrestors of Class B & C suitable for single phase supply in TT network as per Specn RDSO/SPN/165/2023 ver.4.0 amd-1 or latest and as recommended by RDSO letter No. STS/E/IPS/ GENL dated 27/01/2006 (Amdt.5) (Inspection: RDSO). | Set | 1.00 | 14,999 | 14,999 |
| 109 | Supply of 50mm x 6mm GI tape for interconnecting earth electrodes (Inspection: Consignee). | Metre | 100.00 | 546 | 54,600 |
| 110 | Supply of GI wire (8 SWG) (Inspection: Consignee). | Kg | 50.00 | 175 | 8,750 |
| 111 | Supply of piezo buzzers working on 24 V DC reputed make (Inspection: Consignee). | Numbers | 2.00 | 78 | 156 |
| 112 | Supply of PVC Pipe 110mm dia, 6m length including joints (Inspection: Consignee). | Numbers | 50.00 | 1,163 | 58,150 |
| 113 | Supply of PVC Conduit pipe 3m length, 25mm dia with required number of bends (Inspection: Consignee). | Numbers | 250.00 | 51 | 12,750 |
| 114 | Supply of Vulco Tape of size 45mm width x 1.5mm thickness x 10m length. It shall be self-bonding type anti corrosive, heat resistant and water proof (Inspection: Consignee). | Numbers | 5.00 | 2,073 | 10,365 |
| 115 | Supply of Aluminium/copper lugs 25 sq.mm of reputed make.as specified by site incharge (Inspection: Consignee). | Numbers | 50.00 | 25 | 1,250 |
| 116 | Supply of Copper lugs 10sq.mm of reputed make (Inspection: Consignee) | Numbers | 100.00 | 12 | 1,200 |
| 117 | Supply of Copper eyelets to suit 16/0.2 wire Dowell's or similar make (Inspection: Consignee) | Numbers | 100.00 | 3 | 300 |
| 118 | Supply of Copper eyelets to suit 10 Sqmm wire Dowell's or similar make (Inspection: Consignee) | Numbers | 100.00 | 6 | 600 |
| 119 | Supply o f Corium Z 1 0 5 Battery cleaner and terminal conditioner of 500ml tin can (Inspection: Consignee). | Numbers | 1.00 | 5,274 | 5,274 |
| 120 | Supply of LED holders with LEDs of size 5mm with 0.5 Watt resistance. To be supplied as per requirement of site in- charge (Inspection: Consignee). | Numbers | 50.00 | 18 | 900 |
| 121 | Supply of Solid State Buzzers with different frequencies in metallic/plastic casing working on 12V - 24V - 60V (Inspection: Consignee). | Numbers | 4.00 | 300 | 1,200 |
| 122 | Supply of 2N/2R Micro switch of L&T or Siemens make (Inspection: Consignee). | Numbers | 10.00 | 557 | 5,570 |
| 123 | Supply of 6 digit 24V non resettable impulse counter (Inspection: Consignee). | Numbers | 4.00 | 1,390 | 5,560 |
| 124 | Supply of Silane Siloxane Aliphatic Urethane Resin Blend Solvent based high technology membrane radiant heat reflecting insulating thermal barrier coating as per RDSO letter No. STS/E/Apparatus Case (Fabricated) Vol.II dated 06/06/2012 (Inspection: Consignee). | Litre | 15.00 | 6,183 | 92,745 |
| 125 | Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19) (Inspection: Consignee). | Numbers | 80.00 | 195 | 15,600 |
| 126 | Supply of the following resistors/condensers/diodes. a) 50V, 470µF electrolytic capacitor - 20 Nos. b) 50V, 1000µF electrolytic capacitor - 20 Nos. c) 50V, 2200µF electrolytic capacitor - 20 Nos. d) 100, 10W wire wound resistance - 20 Nos. e) BY127 diode - 10 Nos. f) PVC Insulation tapes of 25m length - 25 Nos. (Inspection: Consignee). | Set | 10.00 | 3,766 | 37,660 |
| 127 | Supply of 50V, 10000µF electrolytic condenser of reputed brands like Philips/Keltron or similar (Inspection: Consignee). | Numbers | 20.00 | 486 | 9,720 |
| 128 | Supply of Electric Track Drilling machine shall be suitable for operating on 110V, 50Hz AC/DC fully insulated and no-load RPM shall be 1900/1000 and the power input is 550W. Machine with suitable inter changeable track mounting stand and drilling to be designed with adjustable facility and along with a set of 20 Nos. of 7.2 mm Dia Bosch MSS drill bit, Drill check dia. 13 mm and drilling dia in steel 8mm/13mm along with packing accessories (Inspection: Consignee). | Numbers | 1.00 | 22,602 | 22,602 |
| 129 | Supply of Feather lite table of Model No. V-MT 1890 & V- 2D+1F or similar (Inspection: Consignee). | Numbers | 1.00 | 29,573 | 29,573 |
| 130 | Supply of Godrej CH7 model or similar (Inspection: Consignee). | Numbers | 2.00 | 4,018 | 8,036 |
| 131 | Supply of Godrej PCH5d13R model or similar (Inspection: Consignee). | Numbers | 1.00 | 5,516 | 5,516 |
| 132 | Supply of Godrej shelf storage of 916 x 486 x 1981 mm or similar (Inspection: Consignee). | Numbers | 1.00 | 26,479 | 26,479 |
| 133 | Supply of steel stools 18" height neatly finished and painted (Inspection: Consignee). | Numbers | 4.00 | 489 | 1,956 |
| 134 | Supply of Fibre table of 4 Feet x 2 Feet one number and fibre chairs two numbers. They should be of standard make and quality like Neelkamal or similar (Inspection: Consignee). | Set | 1.00 | 2,099 | 2,099 |
| 135 | Supply of rotary barrel hand pump of capacity 5 litres / 20 turns with telescopic steel tube suitable for taking HSD oil from 210 litres barrel (Inspection: Consignee). | Numbers | 2.00 | 658 | 1,316 |
| 136 | Supply of HDPE jerry can of 20 litres capacity. The jerry can shall be supplied at site as per the requirement of site in- charge (Inspection: Consignee). | Numbers | 10.00 | 154 | 1,540 |
| 137 | Supply of Godrej Navtal Locks with diameter of 50mm with 3 keys (Inspection: Consignee). | Numbers | 10.00 | 563 | 5,630 |
| 138 | Supply of key chains with ring and plastic name plate of dimensions 60mmx20mmx3mm. The plastic name plate shall be engraved with station name on one side and key particulars on the other as specified by the site in-charge (Inspection: Consignee). | Numbers | 10.00 | 34 | 340 |
| 139 | Supply of Aluminium Step ladder of 5 feet height of Bathla make or similar (Inspection: Consignee). | Numbers | 1.00 | 9,122 | 9,122 |
| 140 | Supply of Electrostatic Rubber Matting of thickness 2mm as per IS-15652/2006 with suitable adhesive material (Inspection: Consignee). | Sqm | 75.00 | 2,390 | 1,79,250 |
| 141 | Supply of Alkosign felt notice board of size 4' x 3' with glossy fibre doors having locking arrangements (Inspection: Consignee). | Numbers | 1.00 | 9,281 | 9,281 |
| 142 | Supply of printed bilingual fibre boards of size 4.5" X 12". The matter shall be printed as per the instructions of engineer in charge (Inspection: Consignee). | Numbers | 4.00 | 2,401 | 9,604 |
| 143 | Supply of Double key lock for relay room (Inspection: Consignee). | Numbers | 2.00 | 1,233 | 2,466 |
| 144 | Supply of A2 size circuit diagram sheets transparent plastic cover of superior quality of various size. The sheet shall have provision for hanging (Inspection: Consignee). | Numbers | 200.00 | 59 | 11,800 |
| 145 | Printing, binding and supply of the following Registers with latest proforma as given by engineer in-charge. Each register shall be of 100 pages. 1) Station Asset Register 2) Deficiencies 3) Officer Inspection Book 4) Station Message Book 5) Infringement Measurement Book for Signaling Assets6) Route Cancellation Register 7) Relay Room Key Register 8) Selection Circuit Testing Register 9) Cable Testing Register 10) Signal Maintenance Record 11) Battery Maintenance Register 12) Mechanical Signaling Register 13) Axle Counter Maintenance Register 14) SSDAC / HASSDAC/ MSDAC Maintenance Register 15) Block Instrument Maintenance Register 16) Track Circuit Maintenance Register 17) Mechanical Lifting Barriers Maintenance Register 18) Electrical Lifting Barriers Maintenance Register 19) Electrically Operated Point Maintenance Register 20) Electronic Interlocking Maintenance Register 21) Location Box Maintenance Register 22) Earth Testing Record Register 23) Joint Inspection of Points and Crossings Register 24) Joint Inspection of Track Circuits 25) Joint Inspection of Track Circuits with OHE 26) Diesel Generator / Solar Panel Register 27) UFSBI maintenance register (Inspection: Consignee). (Unit : Per Register) | Each | 900.00 | 358 | 3,22,200 |
| 146 | Supply of Tool Kit as under - 1. Standard Tool Bag (CANAVAS) - 1 No. 2. Soldering Iron (Make Soldern/Philips)-60W/230V - 1 No. 3. Digital Multimeter - True RMS Meter (Philips/Fluke/ Rishabh Rish 18S) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No. 4. Screw Driver set of 6 pieces (Taparia Make) - 1 No. 5. Cutting plier 6" (Taparia Make) - 1 No. 6. Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No. 7. Nose plier 6" (Taparia Make) - 1 No. 8. Wire stripper (Taparia Make) - 1 No. 9. Fiber tape 3m length - 1 No. 10. Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material) 11. Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No. 12. Pop spanner wrench 10 mm to 30 mm (Auto adjustable spanner) of Taparia make - 1 No. 13. Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No. 14. Hacksaw frame with blade 6", 4" width (for cutting cable) - 1 No. 15. Hammer 3.0 lb - 1 No. 16. Chisel 6" (for cutting bond wire) - 1 No. 17. Poker 8" (for removing bond wire, bond pin) - 1 No. 18. Heavy duty Screw Driver 12" with plastic handle (Taparia Make) - 1 No. 19. Test piece (Point wedge piece) - 1 No. 20. Multi colour rechargeable LED torch light - 1 No. 21.Universal key - 1 No. 22. Box spanner for 6 way terminals (13mm) - 1 No. 23. Nylon brush (for cleaning purpose) - 1 No. 24. Sealing plier - 1 No. 25. Crimping Tool (1.5 to 16sq.mm) - 1 No. 26. Feeler gauge - 1 Set 27. TSR Meter (for testing condition of track circuit) - 1No. 28. Wooden Block (60mm x 60mm) - 1 No. 29. Track shorting clips - 1 No. 30. Tester - 1 No. 31. Flat file 12" length x 1" width - 1 No. 32. Clip on meter - 1 No. 33. Digital Earth meter - 1 No.@10"46@ Meggar - 1 No. (Inspection: Consignee). | Set | 1.00 | 46,332 | 46,332 |
| 147 | Supply of true RMS 5 digit 60000 counts digital multi meter with the following specification. 1. Frequency range - 6Hz to 1MHz mV AC. 2. Bandwidth - 10kHz. 3. AC voltage range - 1mV - 1000V, ± 0.5%. 4. DC voltage range - 1µV - 1000V, ±0.05%. 5. AC current range - 1µA - 10A, ± 0.5%. 6. DC current range - 1nA - 10A, ± 0.2%. 7. Capacitance range - 1pF - 10000µF. 8. Data logging - 32000 Readings. 9. Dual display - Available. 10. Other features - Shall have temperature measurement, diode, continuity, duty cycle measurement, self battery voltage measurement, low pass filter, Min, Max and Average value recording, back light, bar graph, protective rubber holster. (Inspection: Consignee). | Numbers | 1.00 | 15,157 | 15,157 |
| 148 | Supply of Clip On Meter of Model Fluke 317 or similar with the following specification. 1. True RMS responding. 2. Voltage - DC 600V, AC 600V, DC accuracy - ±1% + 4 digit. 3. AC accuracy - ±1.5% + 5 digit 4. Current - DC 600A, AC 600A, AC accuracy: - ±1.5% + 5 counts, AC/DC current measurement. 5. Unique 40A low frequency measurements capability with 0.01A resolution. 6. Special filter circuit to enable accurate measurement of PWM output. 7. Additional measurement of resistance 8. Continuity check feature 9. Data hold features with large, easy to read backlight display. 10. Calibration certificate 11. 1 year warranty (Inspection: Consignee). | Numbers | 1.00 | 20,086 | 20,086 |
| 149 | Supply of Surveyor's Wheel (rodometer) (Inspection: Consignee). | Numbers | 2.00 | 4,245 | 8,490 |
| 150 | Supply of Analog Insulation Tester of model No. Meco MC 941 or similar- 500V/1000 M Ohms (Inspection: Consignee). | Numbers | 1.00 | 4,961 | 4,961 |
| 151 | Supply of Analog Earth Tester of WACO make or similar along with test kit and leather case or similar (Inspection: Consignee). | Numbers | 1.00 | 5,884 | 5,884 |
| 152 | Supply of Digital Transmission Measuring Set as per specification IRS : TC 43-87 APLAB or similar (Inspection: Consignee). | Numbers | 1.00 | 27,853 | 27,853 |
| 153 | Calibration of Instruments: at Govt approved labs as per instructions of engineer in charge - Analog Insulation Tester (Inspection: Consignee). | Numbers | 1.00 | 3,894 | 3,894 |
| 154 | Calibration of Instruments: at Govt approved labs as per instructions of engineer in charge - Digital Multimeter (Inspection: Consignee). | Numbers | 1.00 | 3,245 | 3,245 |
| 155 | Calibration of Instruments: at Govt approved labs as per instructions of engineer in charge - HV tester (Inspection: Consignee). | Numbers | 1.00 | 7,788 | 7,788 |
| 156 | Calibration of Instruments: at Govt approved labs as per instructions of engineer in charge - Digital Micro ohm meter (Inspection: Consignee). | Numbers | 1.00 | 3,245 | 3,245 |
| 157 | Supply of 8 MP bullet IP based day and night high resolution camera spec with IP 66 rated water proof, dust proof for outside application with RDSO Specn RDSO/SPN/TC/65/2013 ver. 6 or latest (Inspection: RDSO). | Numbers | 6.00 | 27,500 | 1,65,000 |
| 158 | Supply of 10TB internal hard disc with power and SATA data cables suitable for 16 channel super NVR (Inspection: Consignee). | Numbers | 1.00 | 29,349 | 29,349 |
| 159 | Supply of FRP type colour light Signal Unit 2 aspect complete as per Drg No. SA 23003/AIM with latest amendment and specification IRS: S 26-64 or latest (Inspection by RITES). | Numbers | 1.00 | 32,681 | 32,681 |
| 160 | Supply of complete set of ground connections for high thrust 220 mm stroke point machine along with insulation as per Drg No. RDSO/S3454 Alt.B dt 25-01-2023 or latest along with insulation (Inpsection: RITES). | Set | 3.00 | 58,410 | 1,75,230 |
| 161 | Supply of smart OTDR (35/37 DB) with rechargeable Li-ion battery (6400mAh), 7- inch TFT color display, dual USB ports, and one LAN port for data transfer. Pulse width range: 3ns-20µs; distance range: 400m-256km; with inbuilt Visual Fault Locator (VFL). Complies with TEC Standard No. TEC 88130:2019. Make: Telogica Limited, Model: ATL-1315Bi or better (Inspection: Consignee). | Numbers | 1.00 | 1,75,230 | 1,75,230 |
| 162 | Supply of Laser Source meter as per Specn no. TEC/ GR/TX/OPM-001/04/NOV- 13 of model Viavi OLS 35 or similar (Inspection: Consignee). | Numbers | 1.00 | 88,783 | 88,783 |
| 163 | Supply of Power meter as per Specn TEC/GR/TX/OPM-001/04/NOV-13 of model Viavi OLS 35 or Similar (Inspection: Consignee). | Numbers | 1.00 | 32,645 | 32,645 |
| 164 | Supply of Printer for maintenance terminal at station - HP LaserJet 1020 Plus or similar (Inspection: Consignee). | Numbers | 1.00 | 16,135 | 16,135 |
| Schedule total | ₹1,29,25,678.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
4.CAVALRYBARRACKS.pdf
ATTACHMENT
SIP 2 CVB
ATTACHMENT
TD-6.pdf
ATTACHMENT
GCCApril2022.pdf
ATTACHMENT
GCCcorrectionSlip1to10.pdf
ATTACHMENT
GCCCorrectionSlipNo.11.pdf
ATTACHMENT
MakeinindiaPolicy1.pdf
ATTACHMENT
LetterofCredit.pdf
ATTACHMENT
Annexure-VIBTurnover.pdf
ATTACHMENT
Experience.pdf
ATTACHMENT
CAVALRYBARRACKS_IPU.4124A-asmade.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .