Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹19.2 L
EMD Value
₹38,403
Closing Date
10 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aerospace Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Bangalore Complex Aerospace Division
Construction of Project cell 3rd floor at Engineering block in Aerospace division HAL BC
7114
HAL/ASD/NIT-286/24-25
Works
Bangalore Complex - Aerospace Division
₹0
₹38,403
10 May 2024
25 Apr 2024
25 Apr 2024
10 May 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Cost of tender document (DD no, Date, amount)
Earnest Money Deposit (Number, Date, Amount)
Registered Contractor
Not Enclosed
Average annual financial turn over during the last 3 years, ending 31st March 2021 [ should be at least 30% of the approx. estimated amount put to tender]
TURN OVER IN Rs.
Enclosed
Enclosed
Enclosed
ESI & PF Nos with proof
Related Document to be Uploaded to eProcurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission.(solvency required will be 40% of the approx. estimated amount put to tender)
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Electrical license
Experience of having successfully completed similar works during last 7 years ending last day of March-2024. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
HAL/ASD/NIT-286/24-25 HAL/ASD/CB-286/24-25
Construction of Project cell (3rd floor) at Engineering block in Aerospace division HAL (BC).
Specification
Demolition of brick work built in cement mortar, of any description and at any height etc., complete all as directed by EIC. (Disposal to the BBMP Authorized landfills shall be measured under Sl No. 4).
Demolition of cement concrete of any description and at any height etc., complete all as directed by EIC. (Disposal to the BBMP Authorized landfills shall be measured under Sl No. 4).
Taking out / removing the existing roof tratment including damaged tarfelt, loose plaster, etc., from roof surface of any description at any height with required scaffolding and preparing the surface by cleaning with brushes and solvent, taking out all dirt, dust, fungus, organic matter etc., all complete as directed by EIC. (Disposal to the BBMP Authorized landfills shall be measured under Sl No.4)
Disposal of surplus earth/moorum/ building rubbish/waste sand/ malba/ similar unserviceable, dismantled or waste material of partitions,ceiling boards, tiles, frames, cementious materials, dead concrete lumps etc by mechanical transport including loading, transporting, unloading in all lifts/loads upt 10 km distance from HAL. completely as per directions of Engineer-in-charge.
Supplying , mixing and placing in position cement concrete (1:2:4) using 20 mm graded granite aggregate of required thickness as ordered including compaction, curing, formwork, finishing the exposed surface of concrete an even surface without using extra cement etc., at any height including scaffolding etc., all complete as directed by EIC
Providing & Laying Autoclaved Aerated Concrete (AAC) blocks masonry 100mm / 125mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in Super structure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6mm dia M S bars at every third course of masonry work etc., all complete as directed by OIC / EIC
Plaster in repairs and filling the gaps in any with CM (1:6) 15mm thick plastering over brick & concrete surface for internal / external areas including rendering as requred in internal areas & smooth etc. Complete.
Supplying,fabricating and fixing in position MS Builtup columns / trusses in arch as suitable profile indicated in drawing or as directed by EIC/OIC, Stanchions using MS Structurals / tubular such as ISSHS/ ISRHS/ISMB/ ISA/ ISMC/NB/ MS Plates/ MS Flats etc., as per drawing for trusses, purlins,bracings at any height including required scaffolding for base plates, stiffners, bolts, including necessary cutting, welding, alignment of bolts etc., complete.
Providing and installing powder coated aluminium glazed partitions with outer frame verticals and horizontal members of not less than 50 Microns anodized aluminium extruded rectangular hollow tube from alloy conforming to designation 63400 of I.S 737 and temper W.P (H.E.9 W.P) of 'JINDAL', 'INDAL' or other approved equivalent manufacture comprising of the following :a) Anodised Aluminium extruded rectangular hollow tubes measuring not less than (101 x 44 x 2.0) mm in natural matt finish for door openings, outr frame, intermediate, verticals and horizontals not exceeding at 100 cms. centres (approximately) or at suitable intervals as required bottom panel upto nearly 0.9 mtr height from floor level fixed with 12mm thick 'NOVOPAN' or other approved equivalent particle board with integral laminate facing on booth faces with same shade and colour, fire moisture and termite resistant quality etc., all complete as directed by EIC. b) Balance panels fixed with 4.5mm thick tinted sheet glass of approved quality, conforming to I.S.2835 in panes exceeding 0.50 Sqmtrs including providing PSUH / PULL sticker to glass panes, etc., all complete as directed by EIC. c) Superior quality rubber glazing gaskets and aluminium tapered glazing clips 0.7mm thick and measuring (19 x17) mm self interlocking screwless, snap on type for fixing both side laminated particle board/glazing, etc., all complete as directed by EIC.
Supplying, fabricating and fixing Aluminium - glazed Three track sliding windows with powder coated anodized aluminium sections of high grade alloy approved make manufacturer comprising of the following: a) 18mm shutter with top, bottom and side sections thickness & width to be around 1.29mm & 40mm respectively. b) The bottom section of the frame shall be around (92x45.5 to 38x1.50)mm weighing . c) The top and side frame including the handle side and the interlock side shall be around (92x31.75x1.50)mm to accomodate shutter section of around [40x18x1.29]mm all round.The shutters are to be provided with 4.5mm thick tinted glass for two shutters and stainless steel fly proof shutter for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip including all fittings like handles, locking arrangements, EPDM gasket with all necessary scaffolding, tools as per approved drawings, etc., all complete as directed by EIC/OIC .
Painting over the exterior surfaces of walls, chajjas with two coats of ACE paint of approved brand, colour, shade, tint, pattern including preparation of surface, applying a coat of alkali resistant primer curing at all heights including necessary scaffolding,formwork etc., all complete as directed by the EIC.
Painting the interior surfaces of walls and ceiling at any height with two coats of plastic emulsion paint of approved shade and manufacture including preparation of previously painted surface by scraping down hardened patches, rubbing down, sand papering, removing greasy spot, stoping holes and crevies to obtain blemish less and dry surface etc., including required scaffolding etc., all complete as directed by EIC.
Textured painting for internal walls of approved pattern including preparation of old surface by scraping down hardened patches, rubbing down, sand papering, removing greasy spot, filling crevies for blemish less/ dry surface etc., including required scaffolding etc., all complete as directed by EIC/OIC
Supplying and fixing in position factory insulated sandwich panel as specified below, with facings made up of pre-painted galvalume, not less than 0.45mm thick on top and 0.40mm on the bottom with min 550Mpa yield strength. The core material shall be made up of rigid polyurethane foam (PUF) conforming to IS 12436 and of density around 40 + 2kg/m3 fixed with self tapping screws including necessary supplementary fittings, joint fillers, joint laps, making provision for accessories such as ridges, flashings, necessary cutouts / openings, supports for joinery as required etc., all complete as per manufacturer's specification etc., complete all as directed by EIC. (The agency shall submit test certificate regarding specification of materials and other properties from the manufactuer and sample shall be got approved before ordering and lap will not be considered for payment.) A Performance Guarentee bond for 5 years for leak pfoof roofing shall be given by the contractor on Non judicial stamp paper for Rs.200/-. The 10% of completed value of this item shall be deducted as defect Liability Deposit and the same shall be returned after successful completion of 5 years from the date of completion of contract / project as a whole)
(a) 80mm thick for Roofing
(b) 50mm thick for cladding alround
supplying & laying 18mm thick Polished Granite of approved design and texture, machine cut, in flooring & wall cladding laid over cement screed and jointed with cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including screed of cement mortar (1:4) minimum 20mm average thick to a required level and gradient including grinding and polishing complete etc as and where directed by EIC
Supplying and laying designer vitrified tiles for flooring of approved design, colour & manufacturer of size (1200 x 600)/(900x900) x 10mm or suitable size as approved, over and with a screed of CM (1:4) min. 20mm thick to a required level & gradient, joints set and pointed with coloured cement to match with that of tiles, curing,etc., complete as directed by EIC/ OIC.
Supplying and laying antiskid vitrified tiles for flooring of approved design, colour & manufacturer of size (600x600x10)mm or suitable size as approved, over and with a screed of CM (1:4) min. 20mm thick to a required level & gradient, joints set and pointed with coloured cement to match with that of tiles, curing,etc., complete as directed by EIC/ OIC.
Supplying and laying mat/ glossy finished 1st quality ceramic tiles for wall dadooing of approved design, colour & manufacturer of size 450-600mm x 300mm x 6 mm or suitable size as approved, over and with a screed of cement mortar (1:4) minimum 20mm thick to a required level & gradient, joints set and pointed with coloured cement to match with that of tiles, curing,etc., complete as directed by EIC/ OIC
Providing and fixing in position of vitreous urinals with sensor unit of Parryware/ Hindware Italian collection of approved model incl. all required fittings such as CP spreaders, CP flange, CP brass screws, washers, etc., incl. cutting & making good the walls and floors wherever required including removing existing CC bedding etc., complete all as per the specification & direction of EIC/ OIC.
Supplying and fixing light coloured glazed wall -Hung EWC of premium make with concealed flush tank, angle cock, pillar cock, paper holder, health facet & all necessary fixture/ fittings water & sanitary connections including removing existing CC bedding etc., complete as directed by EIC/ OIC.
Supplying and fixing Quartz single bowl kitchen sink of approx. size 500x430mm of approved make and colour including heavy duty pillar cock, CP Pillar cock 15mm dia, CP Stop cock 15mm dia, PVC inlet pipe with CP checknuts, CP coupling and PVC pipe for waste connection, etc., complete. with required anchor nut and bolts all etc., complete as directed by EIC/ OIC
Supplying and fixing premium make vitreous wash basin of approx. size 560mm x 440mm, counter top type of approved colour including 15mm dia premium Pillar cock 15mm dia, CP brass stop cock 15mm dia,, inlet pipe with checknuts, CP coupling & waste connection, etc., complete. with required anchor nut and bolts all as directed by EIC/ OIC.
Supplying, fixing 15mm dia nominal bore powder coated brass heavy duty long body bibcock of Jaguar's or equivalent make and fitted to the water pipe line by jointing with the necessary fitting etc., all complete as per specification and direction of EIC/ OIC
Supplying and fixing in position 600mm x 1500mmx 20mm thick jet black granite screen wall for urinals including necessary polishing, rounding of edges, framing etc., complete all as directed by EIC/ OIC.
Supplying and fixing SS Grating 125mm dia with rin set in over floor trap etc., complete as directed by EIC/ OIC
Supplying, laying, jointing, testing and commissioning approved make UPVC pipes 6 Kg/cm2 with solvent cement joints for kitchen sink, wash basin outlets and anti syphonage pipes including required pipe fittings such as ends, elbows, unions, tees, sockets, plugs etc., complete the quoted rate shall including necessary chasing in walls making good the same in CM 1:4, etc., complete as directed by EIC/ OIC.
a) 20 mm dia,
b) 25 mm dia,
Supplying and fixing approved make of UPVC multi inlet floor trap with 75 mm dia outlet and CP over on top etc., complete with cement concrete support alround the floor trap etc., complete as directed by EIC/ OIC.
Supplying and fixing premium quality long brass CP towel rail of 600 mm with brackets etc., complete as directed by EIC/ OIC
Supplying and fixing premium quality CP wall mounted Soap dish of approved design & shape including cutting and making good the walls, etc., complete as directed by EIC/ OIC.
Supplying and fixing premium quality etched design mirror of approx. size 600mm x 450mm of approved shape & quality glass etc., complete as directed by EIC/ OIC
Supplying and fixing PVC-SWR (4 Kg/Sq cm) of approved make incl. all fittings like bends/ door bends, tees, supports, jointing with PVC solutions etc., complete as directed by EIC/ OIC.
110 mm dia,
75 mm dia
63 mm dia,
The tenderer shall quote the rates inclusive of GST and all other taxes, duties, levies, fees and charges or any other imposition by the Central / State Government or any statutory authorities of whatever nature. All other costs including loading, un-loading, Insurance, transportation, testing, Certification expenses. L1 (lowest quote) will be determined based on the total quoted amount inclusive of all taxes and other charges as mentioned above.
Payment will be subject to terms and conditions in the tender document
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TenderNoticeNIT286.pdf
TENDER_DOCUMENT • 0.10 MB
PQNIT286VendorToUpload.xlsm
TENDER_DOCUMENT • 0.02 MB
PQNIT286VendorToviewonly.pdf
TENDER_DOCUMENT • 0.02 MB
AnnexuresforNIT286.pdf
TENDER_DOCUMENT • 0.12 MB
TenderdocumentNIT286.pdf
TENDER_DOCUMENT • 0.54 MB
PricebidNIT286VENDORTOviewonly.pdf
TENDER_DOCUMENT • 0.05 MB
PricebidNIT286VENDORTOUPLOAD.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .