REPAIR TO ROOF, CEILING, FLOORING JOINERY, SANITARY FITTINGS and CERTAIN MISC WORKS AT OTM ACCN UNDER AGE B R-III UNDER GE RANCHI

Amount

Demolition of brick work build in cement mortar including all quoins, arches, pillars, completed all as specified and directed

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 completed all as specified and directed

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 but except brick completed all as specified and directed

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water completed all as specified and directed

M & L 10 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and fair complete all as specified and directed.

Material and labour for 15mm thick rendering in two coats (10mm and outer coat 5mm) in cement mortar (1:4) on fair face of brick work or on concrete surfaces and finishing the surface fair and even by mixing WPC in the outer coat as per manufacturers instruction complete all as specified and directed. (Note: WPC shall be measured and paid for under separate items)

M & L for 5 mm thick rendering on fair faces of concrete surfaces of ceiling with cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and directed.

M&L three coat of white wash on newly prepared surfaces on wall , etc completed all as specified and directed

M&L for preparation of new plastered wall and applying one or more coat of "Birla White wall care putty"or" JK Wall Care Putty "to make the entire surface smooth and applying two coats of acrylic distemper of any shade on walls surfaces over a coat of alkali resistant primer free from undulations completed all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for preparing old plastered surfaces of wall by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of distemper oil emulsion, white or tinted complete all as directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Dismantling AC/ CGI/ translucent ( corrugated, semicorrugated,etc), as in roof covering completed all as specified and directed

M&L 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed with L type or J-type or cranked hook bolts etc complete all as specified and directed

M&L 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed with L type or J-type or cranked hook bolts etc but except sheet complete all as specified and directed

M & L Asbestos cement two piece adjustable plain wing ridge 6 mm thick fixed with 'J' type hook bolts etc completed all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws completed all as specified and directed

M&L 1.4 mm thick Fibre glass reinforced translucent sheeting in roof, walls etc fixed with L type or J-type or cranked hook bolts etc completed all as specified and directed

Taking down chowkats or frame with shutters (without taking off shutters from the frames) but Exc 1.5 and n. Exc 4 Sqm each

Taking down shutters of any description exc 1.00 and n . Exc 2 Sqm each completed all as specified and directed

S&F powder coating aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc completed all as specified and directed

S&F powder coating aluminium door shutters, aluminium shutters, aluminium section weighing 0.55 Kg/m including necessary joining joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, powder coating alumnium snap beading, screws etc. completed all as specified and directed

S&F powder coating aluminium window and ventilator shutters, fixed /sliding 2/3/4 track type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coating alumnium snap beading, screws etc. completed all as specified and directed

S&F powder coating louvers types ventilator of aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, including powder coating snap beading, screws etc. completed all as specified and directed

S&F double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar

S&F aluminium (extruded section) body door closer hydraulically regulated, designation No.2 universal type, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repair, complete all as specified and directed.

S&F 4.00 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc completed all as specified and directed

S&F 4.00 mm thick plain Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work completed all as specified and directed

Taking down aluminium doors shutters only (area exc 1.0 sqm but not exc 2.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed. NOTE:- Mortice lock shall be measured and paid for under separate items

Supply only Mild steel 4 levers mortice lock size 75mm completed all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) completed all as specified and directed

M&L PCC 1:2:4 type B1 (20mm graded stone aggregate) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills steps; seismic and other similar bands, plinth courses, string courses, lacing completed all as specified and directed

S&F Dark shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM(1:4) completed all as specified and directed

S&F Dark shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and backing 10 mm thick screed in cement plaster 1:4 completed all as specified and directed

M&L coloured ceramic glazed tiles 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

M&L for coloured non skid ceramic tiles, 6 to 7 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.

M&L Marble work of any shade 16 to 18mm thick in cooking platform, steps, windowcills, etc over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab incl rounding of slab & demolition of old slab where completed all as specified and directed

M&L for 14 to 16 mm thick granite (of any type), as in cooking plateform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges completed all as specified and directed

Demolition of thatching any thickness including capping to ridges and hipscompleted all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & ramming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil.

M&L PCC 1:4:8 type D2 (40 mm graded crushed stone aggr ) as in foundation, filling and mass concrete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for completed all as specified and directed

M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc completed all as specified and directed

Demolition post or struts (RCC) any section incl. taking out

Dismantling of galvanised steel barbed wire/ms wire 2.24mm dia from RCC pillars completed all as specified and directed

S&FGalvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc.completed all as specified and directed(each line wire to be measured)

S&F MS works as in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165

M&L Mild steel round bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I)

S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Demolition of cement concrete (unreinforced) in ground floor and paving etc n.exc 15cm thick above or below ground level incl removing the rubbish from the work site completed all as specified and directed

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

M&L hard core of broken bricks of gauge n exc 63mm, deposited, spread, leveled in layers n exc 15cm thick each layer including watering and well ramming to a true surface.

M&L100 mm th PCC 1:2:4 type B-2 (40mm graded stone agg) as in hard standing.

Hacking out old broken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads completed all as specified and directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane.

S&F in repair Galvanised stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc completed all as specified and directed

S&F Galvanised stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etccompleted all as specified and directed

S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag)

S&F in repairs CP towel rail, 20mm dia, D type,60cm long complete all as specified and directed

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete of make-Parryware-slimline/ Commander-water bird

S & F in repair chromium plated health faucet for EWC all as specified and directed by EIC Make Jaquar ALD - 573 or equavelent

S&F in repairs Chromium plated toilet paper holder with flap of standard size as approved by Engineer-in-charge. Make Jaquar code ACN -1153N or equivalent

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc completed all as specified and directed

S&F in repair bib tap 15mm fancy type of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .

S&F PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (weight 210 gms) completed all as specified and directed

S&F PVC ball valve 25mm dia with epoxy coated aluminium rod and high density ball (weight 455 gms) completed all as specified and directed

S&F Aluminium anodised handles of extruded section and fixed 125 mm long.

S&F in repairs Grating doom 125/100mm dia.(Min.weight 25gms) of PTMT fixed in repair

S&F 32 mm dia waste coupling PTMT (half or full threaded) (minimum wt-45 gms) fixed in repairs completed all as specified and directed

S&F in repairs steel window peg stay, completed all as specified and directed

Repair of rolling shutter of any type/size with or without ball bearing including top cover, for smooth functioning of shutter including complete greasing, replacement /refixing of ball bearing, safety lock and other connecting items etc complete all as specified and directed. Note :- Ball bearing & safety lock and other connecting items shall be measured and paid separately

Supply only ball beaing for rolling shutters complete all as specified and directed.

Supply only safety lock mild steel with 4 levers for rolling shutter complete all as specified and directed.

Supply only MS Runner, paired rail shutter springs cover anchoring rod, hasp & staple and any other MS material requiring to funnctional of shutters completed all as directed.

M & L for welding in repairs to metal exc 2.5cm but n.exc 5cm length and thickness of welding exc 20mm but n.exc 25 mm completed all as specified and directed

S&F Glass Tray shelf assembly fixed in repairs

S&F in repairs 32 mm dia PVC waste pipe fixed in repairs

S & F in repairs of 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

M K Enterprises

M/S JAI MATA DEE CONTRUCTION CO.

M/s Dwarika Nath Singh

india trading company

M/S Sahib N Sahiba Enterprises