REPAIRS MAINT TO JOINERY PLASTER FLOORING PLUMBING SANITARY FITTING AND OTHER MISC WORK IN JCO ORs MD ACCN AT MALCOM LINE UNDER AGE B R I UNDER GE MAINT INF SCHOOL MHOW

Amount

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M & L for brick work with modular size bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6), complete all as specified and directed.

All as per sl item No:2, but except bricks complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for Glazed ceramic tiles of size 300mm x 200mm x 6 to 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry in cement screed 10mm thick in CM 1:4 and pointed in coloured cement to match complete all as specified and directed.

M & L for ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 but n exc 0.38 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match complete all as specified and directed.

All as per item No 11 above but in skirting over 10mm thick screed in CM 1:4 complete all as specified and directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for machine cut cudappa stone slab 20 - 25 mm thick over cement screed bed 15mm thick (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs on edges, such as in steps, cooking platform, and other similar situations as directed and specified.

M & L for chequered cement concrete tiles 40cm x 40cm x 40 to 25 to 30mm thick (Glosy finished) with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block (glosy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 30 mm thick sand cushioning laid dry to the profile complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M & L for PCC (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

Material and labour for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified.

Material and labour for cutting holes in brick walls built in cement mortor at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:1 and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified.

Material and labour for provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications including taking down and cleaning of old sueface as specified and directed :- (a) Provide PCC (1 : 1.5 : 3) type A0 with using 12.5mm graded stone aggregate in slope of average thickness 50mm mixed with and including liquied water proofing compound PIDIPROOF LW manufactured by Dr FIXIT or equivalent as approved by GE over. (b) M&L rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Finally Apply two coats of balck bituminous paint on complete surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc. (d) Spray of sand on bituminious surfeces. Note: WPT Shall be done approved applicator & supply only liglid WPC shall be measured & paid seperately.

Supply only Liquid water proofing compound complete all as specifed and directed.

S & F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding ccomplete all as specified and directed.

Supply and fix in rep wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S & F in repair CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed all as specified and directed

S&F in rep 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S & F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repair CP fancy type stop valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S & F in repairs CP Brass Fancy type shower rose 50mm dia with long CP Nipple of approved quality complete all as specified and directed.

S & F in repair flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level flushing cistern/basins complete as complete all as specified and directed.

S & F LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete fixed in repairs complete all as specified.

S&F in replacement stainles steel gratings round type 150mm size of (Min Weight 100 gms) complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed.

S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

Dismantling of water tanks (RCC hume Pipe/PVC) 500 Ltr capacity of tanks . including disconnecting all connections etc. complete all as specified and directed.

Supplying & Fixing only new rotational moulded polythylene 500 Ltr capacity water storage tank tripple layer (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I 2004 including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

Taking up or down steel tubing 15mm bore & connections and S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

Taking up or down steel tubing 20mm bore & connections and S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

S&F in repair gun metal gate valves 15 mm with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Taking down door shutter with frame n exc 1.5 Sqm each complete all as specified and directed.

S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of plain colour PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed by Engineer - in - Charge.

Taking down shutters of any description not exceeding 1.00 Sqm each all as specified and directed by Engineer - in – Charge .

Taking down shutters of any description area exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified and directed by Engineer - in - Charge .

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified and directed by Engineer - in - Charge .

All as per item No. 50 above but 30mm thick,factory made divded into squareswith plain chamfered or rounded,mitered and rebated sash bars any numbers and sizes of members of shutters specified in SSR, Part-I Section 8 clause 8.24(b) complete all as specified and directed.

S & F 2nd class HW shutters 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S & F flush shutters, solid core connection with block board core and plywood face panels, commercial type on both sides 25mm thick all as specified and directed

S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repair Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed.

M & L for sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sq.M in each pan complete all as specified and directed.

S & F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan complete all as specified and directed

M & L for sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sq.M in each pan incl hacking out complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe-290 Gde E-165

S&F in repair for factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified.

S&F in repair steel ventilator fixed type with glazing bar complete all as specified and as directed

S and F 100mm long stainless steel butt hinges complete all as specified and as directed.

S & F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified

All as per item No.64 above but 75mm long complete all as specified and directed.

S & F aluminium tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 150mm long all as specified and directed

All as per Item no 66 above but length of bolt 100 mm complete all as specified and directed.

S & F aluminium handles oval type, stove enamelled black 150mm size all as specified and directed by Engineer - in - Charge .

All as per Item no 68 above but length of bolt 100 mm complete all as specified and directed.

S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size aluminium anodized handle complete all as specified

S & F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified and as directed

S & F in repair mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 150mm long all as specified and directed

S & F in repair mild steel pressed handles oval type, stove enamelled black 150mm size all as specified and directed

S & F in repairs aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.

M & L preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 300mm all as specified and directed

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Dismantling of cast iron/pvc pipes jointed in cement mortar 110 / 75 mm bore all as specified and directed

S&F in repair for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

All as per Item Ser 82 No but except pipe complete all as specified and directed.

S&F in repair for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

All as per Item Ser No 84 but except pipe complete all as specified and directed..

S&F in repair Drapory rod 25mm dia aluminium alloy powder coated fixed with fancy type matching pair of bracket not less than 75 grams each fixed with screw . complete all as specified and directed..

S&F PVC ( SWR) bends any radius bore of 110 mm all as specified and directed

S&F PVC ( SWR) bends any radius bore of 75 mm all as specified and directed

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 Ltrs capacity including refixing of all connection complete all as specified.

S&F in repair PVC tank Cover for OHT of 500 Ltr Tank capacity complete all as specified and directed.

S & F in rep stainless steel sink with drainage board made of stainless steel 1mm thick with plugs washers and waste including beding in cement mortor or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified.

Supply and Fix in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

Supply and Fix in repair CI Nahani traps 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete 1:2:4 type B1 complete all as specified & directed.

S&F in repair 18/19mm thick block boards grade 2 quality, interior grade, commercial type as in shelves and partitions of cup boards fixed with screws to under frame work inculding 6 mm thick teak wood lipping edging on all sides complete all as specified and directed.

M&L welding in repairs not exceeding 2.5 cm in length to the metal not exceeding 6mm thick complete all as specified and as directed.

S&F in repair Stainless steel plate rack of size not less than 60cmx75 cm fixed with stainless steel screw complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass and efflorescent salts and trading oil and greasy spots and evenly applying one coat of white wash on surfaces of walls etc complete all as specified and as directed.

All as per item No. 98 above but one coat of white wash on ceiling complete all as specified and as directed.

M & L for preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, mass and efflorescent salts and trading oil and greasy spots and evenly applying one coat of cement based paint complete all as specified and as directed.

M & L for washing rubbing down and stopping distempered surfaces of walls etc and evenly applying one coat of distemper oil emulsion distemper all as specified and directed

M & L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10CM width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and directed

M & L for preparation of old painted steel and iron based surfaces of any description, not otherwise described over 10CM width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and directed

M & L for writing letters or figures (Block, Roman, Italic or Indian) not exc 30 cm high complete all as specified and directed

M & L for writing Stops, Commas, Short lines, dashes, hyphens, brackets, etc complete all as specified and directed

M&L Grouting 25 mm thick under stanchion bases or grillages, etc. including any temporary shuttering to edges with cement mortar 1:2 incl taking out old loose material complete all as specified and directed.

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where directed .

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Rendering 10mm thick in CM 1:4 on concrete surface as in roof, chajja facia etc including liquid water proofing compound @200ml per bag (ii) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sq.M iii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.00 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm incl 100mm overlap all as specified procured from any one of the approved manufacturer's (iv) Applying two coats of bitumenous aluminium paint @ 100 gm/sqm for each coat. complete all as specified and directed.

Material and labour for complete removal of old decorated plastered surfaces of wall,pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a coat of primer (X2) complete all as specified and directed Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger Weather Coat or ICI Dulux (weather shield) Make of primer :- Asian (X2) or Equivalent Note :- (a) Each stage i.e preparation of surfaces,application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

NIDHI CONSTRUCTION

SUNRISE ENTERPRISES