Construction of Canteen Building in the premises of Karnataka State Law University, Navanagar, Hubballi

Sub Estimate 1- Civil Works

Cutting of Trees, excluding removal of stumps and roots of trees, Girth from 300 mm to 600 mm (Ground Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with all...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disp...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposit...

Construction of Embankment with approved materials deposited at site fromroadway cutting and excavation from drain and foundation of other structures graded with desired compaction. ---- including cos...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basemen...

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size deri...

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Ready Mix Concrete (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete work...

Ready Mix Concrete M-30 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Con...

Ready Mix Concrete M-30 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Con...

Ready Mix Concrete M-30 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Con...

Ready Mix Concrete M-30 grade (RMC) with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Con...

Providing and laying in position cement concrete M-30 grade for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m he...

Providing lath plaster with cement mortar 1:3, 5 cms thick with 6mm dia mild steel at 20 cms c to c both horizontally and vertically fixed with chicken mesh for drop chajja, facia , backing to cupbo...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Foundation upto pinth 1a) All other types - 3% of concrete for grade slab M-25 grade, including c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Isolated Footing for M-30 (8% of concrete), including cost of all materials, labour complete as per...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Plinth beams M-30 (50% of concrete), including cost of all materials, labour complete as per specif...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Earth Retaning structure M-30 (10% of concrete), including cost of all materials, labour complete a...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Columns upto plinth M-30 level Grade slab level (70% of concrete ), including cost of all material...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Columns M-30 (70% of concrete), including cost of all materials, labour complete as per specificai...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for lintels M-30 (60% of concrete ), including cost of all materials, labour complete as per specificai...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab beams M-30 (60% of concrete ), including cost of all materials, labour complete as per speci...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab RMC M-30 (50% of Slab concrete), including cost of all materials, labour complete as per spec...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Chejjas, Canopy & other Architectural projections of minor sections. RCC M-30 (45% of concrete), i...

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Ground Floor) ---- including cost and conveyance of a...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and fixing suitable plaster mesh 150 mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped fo...

Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 50mm. Thick with brass inlay with CNC cutting as per the design with malemamnie polish includ...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood, 50 x 20 mm (Ground Floor) ----...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor sp...

Providing and fixing bright finished brass butt hinges with necessary screws etc complete , 125x85x5.5mm heavy type (Ground Floor) ---- including cost and conveyance of all materials, curing, loading...

Providing and fixing bright finished brass tower bolts ( barrel type) with necessary screws etc complete, 250x10mm (Ground Floor) ---- including cost and conveyance of all materials, curing, loading ...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Ground Floor) ---- includi...

Providing and fixing bright brass handles with screw etc 125mm with plate 175x32mm (Ground Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and l...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete. (Ground Floor) ---- including cost and conveyance of all materials, curing, loading and ...

Providing and fixing door latch with necessary screws etc complete. Bright finished brass latch (Ground Floor) ---- including cost and conveyance of all materials, curing, loading and unloading with...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mec...

Providing and fxing Toilet cubicals with the following specifcations, Thickness of Compact Laminate : 18 mm , Color of HPL Boards: As approved by Engineer-in-charge , Size of Cubicle : As per drawing,...

URINAL PARTITION: Supply and installation of urinal partition using Green lam model A. Thickness of compact laminate : 12mm, Height : 1.2mt 450 mm at top / 300 mm at bottom., S.S L-clamp accessories...

Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Ela...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and ...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and Fixing Mosquito mesh shutters made out of Stainless Steel mosquito proof mesh with 95% & above visibility which iis fixed to the powder coated aluminium frame 32mm thick of approved sha...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold a...

Terrace/ Raft & sunken slab waterproofing: Providing waterproof treatment to Raft Slab using 2 coats of acrylic co polymer elastomeric Acrylic co-polymer elastomeric sealer & p...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffo...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, provi...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including app...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall s...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning ...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges, ...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper j...

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (bo...

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles for Toilet of approved texture of size 595 x 595 mm in true horizontal level, s...

Ornamental full Circular Column of outer diameter 0.90 mtr with brick work in CM 1:3 where ever necessary including ornamental plastering 1:2 over existing Circular pillar of size 0.60 mtr diameter up...

Ornamental full Circular Column of outer diameter 0.45 mtr with brick work in CM 1:3 where ever necessary including ornamental plastering 1:2 over existing Circular pillar of size 0.30 mtr diameter up...

Ornamental half Rectangular Column with brick work in CM 1:3 where ever necessary including ornamental plastering 1:2 over existing rectagular pillar of width 450mm for height of 4.5mt from ground as ...

Beam Decoration / Cornicing with plastering 1:3 including cost of labour, necessary fom work, etc as per the Approved Drawing and direction of engineer incharge. ---- including cost and conveyance of ...

Cornices and moulding for railing in RCC 1:2:4 for Railing including smooth plastering as per the design & drawing & direction of engineer incharge (Top railing as per the design of size 200mmx80mm) -...

Cornices and moulding for railing in RCC 1:2:4 for Railing including smooth plastering as per the design & drawing & direction of engineer incharge (Bottom railing as per the design of size 350mmx100m...

Cornices and moulding for railing in RCC 1:2:4 for Railing including smooth plastering as per the design & drawing & direction of engineer incharge (Balusters for railing as per the Design for a heigh...

Mouldings for windows & doors with brick work in CM 1:3 & plaster in CM 1:2 as per the drawing and direction of engineer incharge (At ground foor level) ---- including cost and conveyance of all mater...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Construction of Embankment with approved materials deposited at site fromroadway cutting and excavation from drain and foundation of other structures graded with desired compaction. ---- including cos...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Compacting Original Ground :Compacting original ground supporting embankment: Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankm...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...

Pavement Quality Concrete using paver - M40 grade: Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and ...

Providing and laying in position Reinforced cement concrete M-30 grade design mixuctures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. ...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for gutter top slab ( 50% of Slab concrete), including cost of all materials, labour complete as per sp...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...

Painting Two Coats on New Concrete Surfaces: Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces ---- including cost and conveyanc...

Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. ...

Sub Estimate -2 - Water Supply and Sanitary

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer - in charge ---- including cost and conveyance of all materials, curing, loading and...

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- including c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer - in charge ---- including cost and conveyance of all materials, curing, loading and...

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class (Economy) ---- including cost and con...

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- including c...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class, Economy ---- including cost and conveyance of ...

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class (economy) ---- including cost and con...

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class (economy) ---- including cost and con...

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. ---- inc...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Ec...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer - in charge ---- including cost and conveyance of all materials, curing, loading and...

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class(economy) ---- including cost and conv...

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- including c...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, 20 mm nominal bore ---- including cost and conveyance of all materials, curing, loading...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, 25 mm nominal bore ---- including cost and conveyance of all materials, curing, loading...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore ---- including cost and conveyance of all materials, curing, loading and unloading...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore ---- including cost and conveyance of all materials, curing, loading and unloading...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore ---- including cost and conveyance of all materials, curing, loading and unloading...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 65 mm nominal bore ---- including cost and conveyance of all materials, curing, loading and unloading...

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 65 mm nominal bore (Horizontal) ---- including cost and conveyance of all materials, curing, loading and unloading ...

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore (Horizontal) ---- including cost and conveyance of all materials, curing, loading and unloading ...

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 180 x 150 mm size P type & With Non Modular common burnt clay ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, th...

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, th...

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, th...

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, th...

Providing and fixing unplasticised PVC connection pipe with brass union 20mm nominal bore length of PVC connection including cost of all materials ,labours and HOM of equipments with all leads complet...

Providing and fixing unplasticised PVC connection pipe with brass union 20mm nominal bore length of PVC connection including cost of all materials ,labours and HOM of equipments with all leads complet...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Providing, laying, Providing jointing materials, jointing and testing but excluding excavation and back filling etc. for Oriented Poly vinyl chloride Pipes or O PVC Pipes of highest Orientation Class ...

Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : * 100 mm inle...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...

Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qual...

Providing and fixing toilet paper holder : C.P. Brass ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries an...

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g ---- including cost and conveyance of all mater...

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 20 mm nominal bore, weighing not less than 40 g ---- including cost and conveyance of all mater...

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 g ---- including cost and conveyance of all materi...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, ncluding setting out, shoring, strutting, barricading, caution lig...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Supplying, installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, HOM complete as per specifications. ---- including cost and convey...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes...

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding1000 mm using M20 concrete reinforced with TMT bars Fe 550...

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engi...

Laying Reinforced Cement Concrete Pipe NP4 / Prestresse Concrete Pipe on First Class Bedding in Single Row: Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first c...

Supplying, installing, testing and commissioning of Booster pump with variable frequency drive. The system shall comprises of pump, precharged pressure tank of 100L capacity, pressure switch etc., co...

Providing, installing, testing and commissioning of approved make Microprocessor based Industrial electronic Water level controller with LED indicator with potential free contact for BMS compatibility...

Supply & laying of Anneld Tinned copper cable, 4 core 7 strand 39 guage along with bends, collars, accessories etc., for water level controllers along with 14 strand 38 guage tinned copper cable. ----...

Supply, installation, testing and commissioning of conductive type SS 316 bullet sensors for domestic, flushing sumps and OHTs ---- including cost and conveyance of all materials, curing, loading and ...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : * 100 mm inle...

Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...

Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...

Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...

Supplying, laying, jointing, testing and commission-ing approved make indoor installed,frost free, modular type with sepearate sludge holder Grease seperator plant confirming to DIN EN-1825 & DIN 4040...

Sub Estimate 3- Underground sump tank

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification (Granular material) ---- including cost and conveyance of all materials...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification (Sandy material) ---- including cost and conveyance of all materials, c...

Providing and laying in position plain cement concrete Mix 1:3:6 (M10) for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as...

Ready Mix Concrete (RMC) M-30 grade with cement & Cementious materials Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete wor...

Providing waterproofing & durability enhancing admixture with approval from MORT&H for use on road & bridge projects with IRC accreditation. The Dosage should be at 0.8% by weight of cement + cementit...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Isolated Footing for M-30 (8% of concrete), including cost of all materials, labour complete as per...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for RCC wall M-30 (10% of concrete), including cost of all materials, labour complete as per specificai...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Slab M-30 ( 50% of Slab concrete), including cost of all materials, labour complete as per specific...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing and laying waterproofing treatment to Water tanks & Liquid Retaining structures with two component acrylic polyer modified cementitious waterproofing membrrane with minimum elongation of 50%...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Sub Estimate -4 -Electrification

PVC CONDUIT & ITS ACCESSORIES: Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using i...

PVC CONDUIT & ITS ACCESSORIES: Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using i...

PVC CONDUIT & ITS ACCESSORIES: Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using i...

PVC CONDUIT & ITS ACCESSORIES: Supplying heavy gauge PVC conduit pipe …….dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using i...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and run...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and run...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and run...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and run...

Supplying and fixing PVC/metal conduit Deep junction box: 19/20mm deep Junction box ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labou...

Supplying and fixing PVC/metal conduit Deep junction box: 25mm deep Junction box ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, ...

Supplying and fixing PVC/metal conduit Deep junction box: 32mm deep Junction box ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, ...

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.: upto 50mm conduit in brick wall -...

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.: upto 50mm conduit CC floor ---- i...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and

clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and

clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and

clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying Galvanized steel flexible conduit pipe …mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of...

Supplying GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...

Supplying GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...

Supplying And Fixing M.S. Rafter Clamp Set made out ofM.S. Flat & 14mm M.S. rod. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hir...

Supplying And Fixing Metal Fan Box with Round Hook. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (75x75x65mm) ---- including ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (100x75x65mm) ---- including...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (135x75x65mm) ---- including...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (180x90x65mm) ---- including...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (200x90x65mm) ---- including...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (135x160x65mm) ---- includin...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. (200x200x65mm) ---- includin...

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. (upto 50mm conduit in brick wall) ...

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. (upto 50mm conduit CC floor) ---- ...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using N...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of ...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and vir...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and vir...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and vir...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and vir...

Wiring for lighting/power circuit using one of PVC insulated 1100V grade, stranded Aluminium wire single core in open or concealed system of wiring of wiring with specified IS 694:2010 (The following...

Wiring for lighting/power circuit using one of PVC insulated 1100V grade, stranded Aluminium wire single core in open or concealed system of wiring of wiring with specified IS 694:2010 (The following...

Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wi...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary ra...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (6Amps one way Switch) ---- including cost and conveyance of a...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (6Amps Two way Switch) ---- including cost and conveyance of a...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (6Amps 3way socket) ---- including cost and conveyance of all ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Stepped Fan Regulator.) ---- including cost and conveyance of...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (16Amps one way switch) ---- including cost and conveyance of ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (32Amps DP switch) ---- including cost and conveyance of all ...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (6/16Amps universal socket) ---- including cost and conveyance...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (TV/Telephone socket) ---- including cost and conveyance of al...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (RJ45/ I.O.outlet Cat-6) ---- including cost and conveyance of...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. ---- including cost and c...

supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. (60mm) ---- including cost and conveyance of all material...

supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. (80/90 mm) ---- including cost and conveyance of all mate...

supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. (110mm) ---- including cost and conveyance of all materia...

Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab. ---- including cost and conveyance of all materials, curing, loading ...

Supplying….way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws. (1 way gang box) ---- including cost and conveyance of all materials, curing, loading and unloading wi...

Supplying….way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws. (2 to 4 way gang box) ---- including cost and conveyance of all materials, curing, loading and unloadi...

Supplying….way plastic gang box and fixing using necessary wooden/ rawl/phill plugs and screws. (6 to 10 way gang box) ---- including cost and conveyance of all materials, curing, loading and unload...

Supplying and fixing of metal clad industrial plugs and sockets.: 2pole+earth 250V PLUG (16A) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead a...

Supplying and fixing of metal clad industrial plugs and sockets.: 2pole+earth 250V PLUG (32A) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead a...

Supplying and fixing of metal clad industrial plugs and sockets.: 3pole+earth 440V PLUG (16A) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead ...

Supplying and fixing of metal clad industrial plugs and sockets.: 3pole+earth 440V PLUG (32A) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead ...

Supplying and fixing of metal clad industrial plugs and sockets.: 2pole+earth 250V SOCKET (16A) ---- including cost and conveyance of all materials, curing, loading and unloading with all lea...

Supplying and fixing of metal clad industrial plugs and sockets.: 2pole+earth 250V SOCKET (32A) ---- including cost and conveyance of all materials, curing, loading and unloading with all lea...

Supplying and fxing regular MCCB distribution Panel confrming to IS / IEC 61439-3 and IK09 tested as per IS / IEC 62262 with minimum IP 43 protection provided with Polyurethane (PUR) gasket, with suit...

Supplying and fxing regular MCCB distribution Panel confrming to IS / IEC 61439-3 and IK09 tested as per IS / IEC 62262 with minimum IP 43 protection provided with Polyurethane (PUR) gasket, with suit...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's sing...

Supplying and fxing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying, fxing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- including cost and conveyance of all materials, curing, loading and unloading with al...

Supplying, fxing and wiring 3 Phase Digital Ammeter / Voltmeter ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of mach...

Supplying, fxing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor ---- including ...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with

heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Supplying 4mm thick plastic sheet with necessary nitches for fxing switches, regulators etc, and fxing on existing wooden or metal box using N.F. screws ---- including cost and conveyance of all mater...

Supplying and fxing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C ---- including cost and conveyance of all materials, curing, loading and unlo...

Supplyingand fxingangle iron framework fabricatedout ofM.S. angle iron.. andM.S. Flat......withbolts,washers etc., andpainted with 2 coats of red oxide and then two coats of approved paint. (40 x 40 x...

Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charge...

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire char...

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of mac...

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired ---- i...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power,

power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- including cost and conveyance of all materials, curing, loading and unloading with a...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- including cost and conveyance of all materials, curing, loading and un...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (16 S...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (25 S...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff (2.5 sqmm to 25 sqmm) ---- including cost and conveyance of all...

Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. (150x50mm) ---- including cost and conveyance...

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. (8 SWG GI Wire) ---- i...

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. (8 SWG Copper wire.) -...

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- including cost and conveyance of all materials, curi...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double b...

Supplying and drawing UTP-CAT 6E LAN cable. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipmen...

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. (2Pair) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lift...

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead a...

Supplying fixing of Network Switches: 10Port Gigabyte (manageable) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of m...

Supplying & fixing of I/O socket with back box: Single I/o ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineri...

Supplying & Fixing of …Mtrs Cat 6 Patch Cable (1mtr) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries a...

Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wir...

Supplying, installation, testing & commissioning of 12V..AH batteries in polypropylene container for D.G.sets. Low maintenance batteries, plate type. (75 / 80 AH capacity) ---- including cost and conv...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (25x3mm GI strip) ---- including cost and conveyance of all materials, curing,...

Supplying of Hand gloves. complete ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., c...

Supplying of first aid box. complete ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc.,...

Supplying of SAFETY MASK. complete ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., c...

Supplying of FIRST AID CHART with lamination. CompleteANDEX/ NEWAGE/ MINIMAX ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire ch...

Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications. ---- including cost and conve...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts / nuts and washer or welding as required. 150mm wide, 50mm Height Ladder type Cable tray ---- including co...

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has ...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...

Supplying and fxing of LED Bulk head of 10W with IP 65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. ---- including cost and conveyance of all materials, ...

Supplying & Fixing of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI more than 80. ...

Supplying & fixing of Surface mounting type retrofit type -LED tube ....... W comprising of LED linear source with CCT 6500 degree K, CRI more than 70%. efficacy more than 80 lumen per W, life more th...

supplying & fixing of I/O socket with back box (Single I/o) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machiner...

supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. ---- including cost and conveyance of all materials, curing, loading and unloading with all lead an...

Miscellaneous Materials- Caution/Danger Board ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipm...

fixing Danger Board ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and all...

Krone Box: 20 pairs ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and all...

Krone modules for 10 pairs isolation type ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment ...

Fixed Camera Specifications: 1) Lens type: Bi focal auto iris with 10x digital zoom 2) Mode :Day/Night 3) Image size: 720x486 (NTSC, 4) Streaming: High speed 5) Weather Proof: IP 66 compliant 6) Netwo...

erection, Installation and commissioning of CCTV Surveillance system (Fixed Camera) ---- including cost and conveyance of all materials, curing, loading and unloading with all lead and lifts, labour,...

POLES & HIGH MAST Fabricating, supplying and erecting swaged tubular pole of height …Mtr having three sections, and providing two coats of red oxide paint and finished with two...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete., Single Arm Bracket with 1000...