PROVISION OF ROOFTOP SOLAR PANELS AT OTM COMPLEX AGARDANDA FOR ICGS MURUD JANJIRA.

SITC of following size of Grid Tied Solar Power Plant with Solar Panels (ALMM approved): Frame Material : anodized Aluminum alloy firame With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR Coated), High efficency and positive power tolerance Pmax: 0/+5, Module Efficiency should be approx. 189t-219t, Normal operating temperature 45‘C, Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with Bypass diodes, 1009t Electroluminescence test to ensure error free Modules, Thep. temp. co-efficient of the PV module shall equal or better than -0.4596/degree C. Solar PV modules of minimum fill factor 7596 to be used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and 25 year Linear Power Warranty.,Solar Invener: MPPT Range: 80-1000 V, Max efficiency: 97.59¢ - 98.9%, O/p firequency: 50/60Hz, Operating Altitude (m) s4000, O/p Power fiactor: “1, o/P THDi: <3St, Operating Tempreture Range: -25“60"C, Anti-islanding Protection: Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor.Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over Current Protection Integrated, Output short circuit Protection Integrated, output over voltage protection Integrated, Protection Degree: IP65, User Interface LCD & APP,DataIogger & Communication: GPRS / Wi-Fi, Module Mounting Structure: Seamless Box Pipe / 'C' Channel of suitable size for rooNop solar installations with good stability agaist wind & weight load., Hot Dipped Galvanized steel coils. suitable arrangement for base plate for foundation , solar panel mounting, the structure should be suitable for carry the load of solar panel,wiring, sprinkler system etc. with necessary foundation work/wall mount, j bolt, anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304) quality. and Balance of System with necessary Swithgears (Suitabel size and protection of ACDB & DCDB), inter connecting wiring (incl XLPE cable of suitable size for connection of bldg panel appx 30 Rm), copper earthing system, lightinlng arrester system, contractor is fully responsible to liason with various government / Electricity department like state nodal agency, DISCOM & CEIG is included In contractor scope.Contractor shall submit the all structure analysis duly vetted and typical foundation detail and general arrangement drawings for approval of accepting officer and including SITC of solar meter and net meter (bi-directional) with all connedtion and cable with nuts bolts, washers, angle iron complete with ready to use in all manners is in contractor's scope. All the items pertaining to the SITC of shall be catered in the quoted rate. No extra payment shall be enterained.

Providing & erecting Automatic solar panel cleaning system for solar power projects which includes necessary plumbing work (UPVC pipes and accessories) from source of water to project site (upto 65 meters), incl Suitable size of submercible / open well motor with automatic starter, necessary wiring for motor and sprinkler system with safety, timer circuit for automatically on/off the sprinkler system, necessary size and number of nozzles / JET (minimum 1 Nozzle/Jet per module).The all inclusive comprehencive annual maintance contras cost covers yearly malntanance of solar PV Modules, Inverter, wiring,earthing,switchgears, etc with. Cleanig of Module Frequency - Once in a month. material and labour cost including preventive maintanance.The cost covers entire installation. AMC also Includes monthly site visit and inspection of project with submission of inspection and solar generation repot. All panels should be replaced /repaired if found faulty within DLP / warranty time without any financial effect to the department. contractor has to provide necessary licening work for warranty,power,Bidirectional meter etc