Loading
Loading…
Loading…
Tender Value
₹47.9 Cr
EMD Value
₹95.7 L
Closing Date
27 Aug 2026, 3:00 pm
Yes (up to 5 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
TENDER SEC
19 conditions · 5 needing a document upload
Financial Eligibility Criteria: The Tenderer shall be eligible only if he fulfils the following Standard Financial Eligibility Criteria FOR WORKS COSTING ABOVE Rs.50.00 LAKHS: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India. No Technical and Financial credentials are required for tenders having value up to Rs.50 lakh. For tenders costing more than Rs.20 crore, eligibility criteria include bid capacity also as specified in clause 10.3 of IRSGCC- April 2022 - PART I - "Regulations for Tenders and Contracts - For the Guidance of Engineers & Contractors for Works Contracts." The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI. The tenderer will be qualified only if it's available bid capacity is equal to or more than the total bid value of the present tender
A) Technical eligibility criteria for non-composite works costing above Rs.50.00 lakhs As per clause 10.1(a) of IRGCC-2022 ( part-1) :. (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, Or 2.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender or 3.One similar work each costing not less than the amount equal to 60% of advertised value of the tender B ) Technical eligibility for composite tender: 1.Each component of value more than 2 Crs shall be taken for evaluation of technical eligibility as per 10.1(b) of IRSGCC-2022. 2.In case single completion certificate containing more than one component is submitted by the tenderer, value of each component is to be specified in that completion certificate. Separate completed works of minimum required values for each component shall also be considered for fulfilment of technical eligibility criteria 3.In case tenderer fails to submit completion certificate with component wise value bifurcation of work for evaluation of technical eligibility, the certificate shall be treated Incomplete and invalid and shall not be considered for evaluation of technical eligibility. 4.Technical eligibility shall be fulfilled by tenderer as per clause 10.1 of IRSGCC-2022 (Part- I) and 17.15.1(b) of IRSGCC-2022 (Part- I) for the component/components of value of more than 50% of tender value or by Sub- contractor as per clause 7(a)(ii) of GCC (Part-II) for the other component/ components of value less than 50% of tender value. Each other member of JV shall have technical capacity of minimum 10% of advertised value of any component. 5.If the Tenderer proposes to sub- contract any component/components as per item 4 above , which is less than 50% of tender value, then a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the sub- contractor(s) and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility as per clause 7(a)(ii) of Part II of IRSGCC 2022. 6.For component less than Rs 2 Cr, technical Eligibility will not be considered in tender evaluation and the documents of sub-contractor need not be submitted along with tender. 7.The contractor will engage an eligible sub- contractor after award of contract with the approval of Chief Engineer in writing subject to complying clause 7 of Part II of IRSGCC 2022 . Note: Tenderers may see Explanation for Para 10 of the Tender Form (Second Sheet) including Para 10.1 to 10.5 - Eligibility Criteria of IRSGCC-2022.
ATTENTION TO TENDERERS: Tenderers to specifically note that in case tenderer fails to submit completion certificate with component wise value bifurcation of work for evaluation of technical eligibility as laid down in STANDARD TECHNICAL CRITERIA (Point No.1) as above, such certificate shall be treated incomplete and invalid and shall not be considered for evaluation of technical eligibility.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. The work executed by the tenderer for any Govt. /Govt.bodies/PSUs and public listed company shall only be considered for fulfilling of Technical Eligibility Criteria. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause- 27 of SCC 2023.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub- contracting to contractors from such countries as per clause- 27 of SCC 2023.
Components of Works and Value:Component - 1: Civil Works -Rs .41.72 CrsComponent - 2: Electrical OHE -Rs. 6.14 Crs
Defination of Similar Work :- (1) Any work involving execution of earthwork in formation and construction of bridges A N D (2) Design, Supply, Erection testing and commissioning of 50 Hz, Single Phase 25 KV AC OHE (TRD) system or 25 KV AT feeding system (2x25 KV)
108 conditions · 1 needing a document upload
Uploading of Scanned copy/copies of proof(s) of Technical Eligibility Criteria as mentioned in Standard Technical Criteria (as per Pro forma - 1).
Uploading of Scanned copy of work experience certificate issued by public listed company, copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company etc. as per Note for clause 10.1 of IRSGCC- April 2022.
Uploading of Scanned copy/copies of proof(s) of Technically Eligibility Criteria as per clause 7 of IRSGCC-2020, in case the main tenderer proposes execution of any of components mentioned in tender through subcontractor in a composite work as specified in clause 10.1 (b)(iii) of IRSGCC- April 2022.
Uploading of Scanned copy of Bid capacity (as per Pro forma - 2.) and in terms of clause 10.3 & 10.5 of IRSGCC-April 2022.
Uploading of Scanned copy of Statement of payment received in the Last three financial years and the current financial year (as per Pro forma- 2A) along with copies of relevant supporting documents as stipulated.
Uploading of Form 16A/26AS generated through TRACES of Income Tax Department of India, if Client certificate is from other than Govt. Organization.
Uploading of Scanned copy of List of Machinery, Tools & Plants and Staff to be Deployed on this work (as per Pro forma - 3).
Uploading of Scanned copy of Statement of Bank details, PAN & GST (as per Pro forma - 5).
Uploading of Scanned copy of the declaration regarding employment of Retired Engineer / Retired Railway Officer (as per Pro forma - 6).
Uploading a scanned copy of the Memorandum of Understanding in the case of a JV firm (as per Pro forma - 7).
Uploading of request for grant of Mobilization Advance (if applicable) in Proforma-8.
Uploading of Required documents in case of Individual OR Proprietary Firm / Concern OR Partnership Firm OR Company OR J o i n t Venture Firm /HUF/Society, etc., as mentioned in Commercial Compliance (whichever is applicable).
Uploading of Test report of ballast (if applicable).
Uploading of Method Statement (if applicable).
Uploading of Proforma (Proforma-9) attached with Tender Document for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores.
Uploading of (Proforma-10 ) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause- 27 of SCC 2023.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries India .
Uploading a scanned copy of Registration Certificate by Startup firms issued by appropriate authority and recognized by Department of Industrial Policy and Promotion (DIPP) towards exemption of full BID Security and Registration Certificate with registration number by Labour Co-operative Society issued by appropriate authority for payment of 50% BID Security.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case of Proprietary Firm / Proprietary Concern, the tenderers shall scan and submit with his offer (i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii)All other documents in terms of explanatory notes in clause 10 of IRSGCC - April-2022-Part-I. (iii)All other documents as per Clause 14 of IRSGCC - April-2022- Part-1.
In case of Partnership Firm, the tenderer(s) shall scan and submit with their offer, the following documents: (i)A notarized copy of partnership deed or a copy of partnership deed registered with registar . (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract (iv)Other documents as mentioned in terms of para 10 tender form (2nd sheet) of IRSGCC April-2022-Part I. (v) All other documents as per Clause 14 and Clause 18 of IRSGCC -April -2022- Part 1.
In case, the Tenderer is a Company, the tenderer(s) shall scan and submit with their offer, the following documents: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v)All other documents in terms of para 10 of tender form (2nd Sheet) of IRSGCC-2022 (vi) All other documents as per Clause 14of IRSGCC -April -2022- Part 1.
In case, the Tenderer is a JV Firm, the tenderer(s) shall scan and submit with their offer the following documents: In case one or more of the members of the JV is/are (A)Partnership firm(s), following documents shall be submitted: (i)A notarized copy of the Partnership Deed or Copy of partnership deed registered with registar , (ii)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper, (iii)A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm. (iv) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. In case one or more members is/are (B) HUF, the following documents shall be enclosed: (i) A copy of notarized affidavit on Stamp Paper declaring that his concern is a proprietary concern and he is sole proprietor of the concern or he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. In case one or more members of the JV is/are (C)Companies, the following documents shall be submitted: (i)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (ii)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (iii)A copy of Certificate of Incorporation (iv)A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company. (D) In case one or more members of the JV is/are LLP firm/s, the following documents shall be submitted: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation of LLP(iii) A copy of resolution passed by partners of LLP firm, permitting the Firm to enter into a JV agreement.(iv) A copy of Authorization /copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP. (v) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. In case one or more members of the JV is/are Society/s or Trust/s, the following documents shall be submitted: (E)A copy of Certificate of Registration
i)A copy of Memorandum of Association of Society/Trust Deed A copy of Rules & Regulations of the Society (ii) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/Trust. (F)Other documents as mentioned in terms of para 10 of Tender form(2nd sheet) of IRSGCC-April-2022 Part-I. (G)All other documents as per Clause 14 , 17 & 18 of IRSGCC-April 2022 -Part 1 are to be submitted.
In case the Tenderer is HUF, the following documents shall be submitted along with the tender: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii)All other documents in terms of Para 10 of Tender form(2nd sheet) of IRS GCC April 2022. (iv) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
In case tenderer is a LLP Firm registered under LLP Act-2008, the following documents shall be submitted: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv). An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract (v)All other documents in terms Para 10 of Tender form(2nd sheet) of IRSGCC- April-2022 Part-I. (vi) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
In case the Tenderer is a Registered Society & Registered Trust, the following documents shall be submitted: (i)A copy of the Certificate of Registration (ii)A copy of Memorandum of Association of Society / Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Copy of rules and regulations of the society (v)All other documents in terms Para 10 of Tender form(2nd sheet) of IRSGCC- April-2022 Part-I. (v) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
Any other document required for evaluation of his/ their bid as deemed fit by the tenderer.
Scanned copy of Statement of Bank details, PAN & GST (as per Pro forma - 5).
Request for Mobilization Advance if applicable (as per Proforma- 8).
Proforma-9 for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per Special Conditions of Contract) OR Proforma-10 of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. (as per Special Conditions of Contract)
Uploading of Scanned copy/copies of formal agreement duly executed and notarised by the main tenderer/contractor with the subcontractor for the component(s) of work in a composite work proposed to be executed through subcontractor(s).
The tenderer whether sole proprietor/Company or a partnership firm/JV venture (JV) / Registered Society / Registered Trust/HUF etc., if they want to act through agent or individual(s), should submit along with tender, a copy of Power of attorney duly stamped and authenticated by a notary public or by magistrate in favour of specific persion whether he/they be partner(s) of the firm or any other person agreement, receive money, co-ordinate measurement through contractors authorized engineer, witnessed measurement, sign measurements books, compromise, settle, relinquish any claim(s) preferred by the firm and sign " No Claim Certificate" and refer all or any disputes to arbitiration the above power of attorney shall be submitted even if such specific person is authorized for above purpose through partnership deed/memorandum of understanding/Article of Association or such other document, failing which, tender is liable to be rejected.
Hubballi Division:1. Earthwork in Formation, Extension and/or Reconstruction of Bridges, Construction of Station Building, Foot Over Bridge (FOB), Platforms, Platform Shelters, Approach Roads, Electrical General and TRD Works, and Other Associated Works at Malvi (VC-AVC Section) under Traffic Facilities Works. 2.Earthwork in Formation, Extension and/or Reconstruction of Bridges, Construction of Station Building, Foot Over Bridge (FOB), Platforms, Platform Shelters, Approach Roads, Electrical General and TRD Works, and Other Associated Works at Gadignuru (HPT-BAY Section) under Traffic Facilities Works. (Composite work).
GNR-MISCWORKS-HPT-BAY~SWR
GNR-MISCWORKS-HPT-BAY
Open
Works - General
12 Months
Dharwad, Karnataka
₹0
₹95.7 L
4 Aug 2026
4 Aug 2026
13 Aug 2026
468 items across 12 schedules · ₹24,56,63,034.12 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 9300 | 177.5 | 16,50,750 |
| 2 | Ordinary rock | cum | 1550 | 498.9 | 7,73,295 |
| 3 | Hard rock (blasting prohibited) | cum | 1170 | 1,432.95 | 16,76,551.5 |
| 4 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | Metre | 200 | 352.15 | 70,430 |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 6460 | 196 | 12,66,160 |
| 6 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 600 | 2,123.75 | 12,74,250 |
| 7 | All kinds of soil | Sqm | 3000 | 34.15 | 1,02,450 |
| 8 | 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 800 | 8,340.85 | 66,72,680 |
| 9 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 1200 | 7,878.5 | 94,54,200 |
| 10 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 4500 | 7,294.7 | 3,28,26,150 |
| 11 | 1:2:4 (1 Cement : 2 coarse sand ( z o n e - I I I ) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25%: 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%). | cum | 2700 | 9,671.5 | 2,61,13,050 |
| 12 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. | Sqm | 16666 | 842.5 | 1,40,41,105 |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) | cum | 240 | 10,105.1 | 24,25,224 |
| 14 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). | Sqm | 760 | 495.75 | 3,76,770 |
| 15 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 3500 | 392.15 | 13,72,525 |
| 16 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 1500 | 842.5 | 12,63,750 |
| 17 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 1430 | 927.25 | 13,25,967.5 |
| 18 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 1050 | 736.4 | 7,73,220 |
| 19 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 1100 | 961.3 | 10,57,430 |
| 20 | Stairs, (excluding landings) except spiral-staircases | Sqm | 700 | 764.95 | 5,35,465 |
| 21 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 500 | 10,585.9 | 52,92,950 |
| 22 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 592000 | 107.85 | 6,38,47,200 |
| 23 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 1250 | 9,655.7 | 1,20,69,625 |
| 24 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 2000 | 10,011.35 | 2,00,22,700 |
| 25 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 766.2 | 733.5 | 5,62,007.7 |
| 26 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 640 | 9,344.35 | 59,80,384 |
| 27 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 450 | 7,311.25 | 32,90,062.5 |
| 28 | Area of slab over 0.50 sqm | Sqm | 70 | 5,136.3 | 3,59,541 |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 490 | 1,267.95 | 6,21,295.5 |
| 30 | Second class teak wood | cum | 4 | 1,42,949.7 | 5,71,798.8 |
| 31 | Sal wood | cum | 4 | 1,16,520.3 | 4,66,081.2 |
| 32 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading | Sqm | 100 | 1,800.45 | 1,80,045 |
| 33 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 190 | 3,167.95 | 6,01,910.5 |
| 34 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 6000 | 238.35 | 14,30,100 |
| 35 | 100x58x1.90 mm | Each | 140 | 45 | 6,300 |
| 36 | 100x10 mm | Each | 140 | 197.5 | 27,650 |
| 37 | 250x16x5 mm | Each | 120 | 308 | 36,960 |
| 38 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 80 | 854.65 | 68,372 |
| 39 | 125 mm | Each | 100 | 256.65 | 25,665 |
| 40 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 100 | 121.65 | 12,165 |
| 41 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 40 | 570.95 | 22,838 |
| 42 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 60 | 3,720.75 | 2,23,245 |
| 43 | With 12 mm mild steel U beading | Sqm | 140 | 1,228 | 1,71,920 |
| 44 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 1000 | 133.7 | 1,33,700 |
| 45 | Hot finished welded type tubes | Kg | 6000 | 194.4 | 11,66,400 |
| 46 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 9400 | 97.2 | 9,13,680 |
| 47 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 130000 | 172.6 | 2,24,38,000 |
| 48 | M.S. tube | Kg | 10000 | 196.8 | 19,68,000 |
| 49 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 4000 | 772.4 | 30,89,600 |
| 50 | Light shade pigment using white cement | Sqm | 6500 | 1,402 | 91,13,000 |
| 51 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 200 | 1,315.3 | 2,63,060 |
| 52 | Size of Tile 600x600 mm | Sqm | 1350 | 1,553.45 | 20,97,157.5 |
| 53 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 600 | 4,481.3 | 26,88,780 |
| 54 | 75 mm diameter | Metre | 270 | 248.8 | 67,176 |
| 55 | 110 mm diameter | Metre | 480 | 377.4 | 1,81,152 |
| 56 | 75 mm | Each | 90 | 91.7 | 8,253 |
| 57 | 110x110x110 mm | Each | 90 | 221.35 | 19,921.5 |
| 58 | 75 mm bend | Each | 90 | 105.9 | 9,531 |
| 59 | 110 mm bend | Each | 110 | 150.35 | 16,538.5 |
| 60 | 110 mm Shoe | Each | 90 | 131.85 | 11,866.5 |
| 61 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 1950 | 738.65 | 14,40,367.5 |
| 62 | Ridges plain (500 - 600mm) | Metre | 600 | 532.35 | 3,19,410 |
| 63 | Gutter (600 mm over all girth) | Metre | 250 | 1,313.7 | 3,28,425 |
| 64 | 1:6 (1 cement: 6 fine sand) | Sqm | 6500 | 333.35 | 21,66,775 |
| 65 | 1:6 (1 cement: 6 fine sand) | Sqm | 4500 | 450 | 20,25,000 |
| 66 | 1:4 (1 cement: 4 coarse sand) | Sqm | 4500 | 411.75 | 18,52,875 |
| 67 | 1:3 (1 cement: 3 fine sand) | Sqm | 1850 | 494.3 | 9,14,455 |
| 68 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 4500 | 262.7 | 11,82,150 |
| 69 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 5500 | 116.9 | 6,42,950 |
| 70 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 5500 | 160.6 | 8,83,300 |
| 71 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 10000 | 193.7 | 19,37,000 |
| 72 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 380 | 176.25 | 66,975 |
| 73 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 500 | 170.7 | 85,350 |
| 74 | Two or more coats on new work | Sqm | 2000 | 155.9 | 3,11,800 |
| 75 | Two or more coats on new work | Sqm | 5000 | 146.8 | 7,34,000 |
| 76 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 150 | 2,434.25 | 3,65,137.5 |
| 77 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 170 | 3,551.25 | 6,03,712.5 |
| 78 | In cement mortar | cum | 150 | 2,060.2 | 3,09,030 |
| 79 | In cement mortar | cum | 160 | 2,458.95 | 3,93,432 |
| 80 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | Sqm | 5000 | 218.9 | 10,94,500 |
| 81 | Moorum | cum | 1400 | 768.25 | 10,75,550 |
| 82 | Surface dressing on new surface with paving bitumen of grade VG - 10 of approved quality using 2.25 kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete: | Sqm | 5000 | 225.35 | 11,26,750 |
| 83 | On W.B.M. @ 0.75 Kg / sqm | Sqm | 5000 | 60.5 | 3,02,500 |
| 84 | For 50 mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm. | Sqm | 4000 | 505.65 | 20,22,600 |
| 85 | Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. | Sqm | 5000 | 88.55 | 4,42,750 |
| 86 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | cum | 650 | 7,993.8 | 51,95,970 |
| 87 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). | cum | 60 | 10,117.6 | 6,07,056 |
| 88 | With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 | cum | 580 | 2,784 | 16,14,720 |
| 89 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. | cum | 680 | 2,914.3 | 19,81,724 |
| 90 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 1080 | 2,017.6 | 21,79,008 |
| 91 | 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. | Sqm | 14600 | 1,045.65 | 1,52,66,490 |
| 92 | 80 mm thick C.C. paver block of M- 30 grade with approved color design and pattern. | Sqm | 1000 | 1,091.5 | 10,91,500 |
| 93 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 18 | 6,767.4 | 1,21,813.2 |
| 94 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 23 | 6,515.55 | 1,49,857.65 |
| 95 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 23 | 1,879.2 | 43,221.6 |
| 96 | 510x1040 mm bowl depth 250 mm | Each | 4 | 6,945.6 | 27,782.4 |
| 97 | Long pattern W.C. pan of size 580 mm | Each | 14 | 1,959.8 | 27,437.2 |
| 98 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. | Each | 20 | 2,784.95 | 55,699 |
| 99 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge.(a) 15 mm nominal dia | Each | 60 | 6,940.75 | 4,16,445 |
| 100 | 32 mm dia | Each | 60 | 119.55 | 7,173 |
| 101 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 30 | 1,607.95 | 48,238.5 |
| 102 | 25 mm nominal dia Pipes | Metre | 500 | 401.55 | 2,00,775 |
| 103 | 40 mm nominal dia Pipes | Metre | 560 | 702.95 | 3,93,652 |
| 104 | 20 mm nominal dia Pipes | Metre | 200 | 537.6 | 1,07,520 |
| 105 | 32 mm nominal dia Pipes | Metre | 160 | 438.6 | 70,176 |
| 106 | 50 mm nominal dia Pipes | Metre | 160 | 794.25 | 1,27,080 |
| 107 | 100 mm nominal dia Pipes | Metre | 400 | 3,271.7 | 13,08,680 |
| 108 | 15 mm nominal bore | Each | 60 | 353.25 | 21,195 |
| 109 | 15 mm nominal bore | Each | 60 | 353.25 | 21,195 |
| 110 | 25 mm nominal bore | Each | 20 | 622.4 | 12,448 |
| 111 | 32 mm nominal bore. | Each | 20 | 689.6 | 13,792 |
| 112 | 50 mm nominal bore | Each | 22 | 1,026.65 | 22,586.3 |
| 113 | 20 mm nominal bore | Each | 22 | 462.5 | 10,175 |
| 114 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 20000 | 11 | 2,20,000 |
| 115 | 100 mm nominal dia | Each | 30 | 37.6 | 1,128 |
| 116 | 125 mm nominal dia with 25 mm waste hole | Each | 30 | 51.85 | 1,555.5 |
| 117 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 30 | 111.45 | 3,343.5 |
| 118 | 15 mm nominal bore with 45 cm length | Each | 263.8 | 121.9 | 32,157.22 |
| 119 | 150 mm diameter | Metre | 300 | 695.8 | 2,08,740 |
| 120 | 150 mm diameter S.W. pipe | Metre | 160 | 1,179.85 | 1,88,776 |
| 121 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 40 | 8,150.5 | 3,26,020 |
| 122 | 600 mm dia RCC pipes. | Metre | 140 | 3,401.25 | 4,76,175 |
| 123 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 500 | 495.05 | 2,47,525 |
| 124 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 500 | 598.6 | 2,99,300 |
| 125 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 160 | 1,176.8 | 1,88,288 |
| 126 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | Sqm | 400 | 617.05 | 2,46,820 |
| 127 | 300 mm dia | Metre | 400 | 707.75 | 2,83,100 |
| 128 | 300 mm dia | Metre | 200 | 825.7 | 1,65,140 |
| 129 | 200 mm nominal size dia | Metre | 80 | 1,113.35 | 89,068 |
| 130 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 400 | 9,844.65 | 39,37,860 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS-1toIRSGCC2022.pdf
ATTACHMENT
Splattentiontobidder_1.pdf
ATTACHMENT
Proforma-092025.pdf
ATTACHMENT
ACS-8toIRSGCC-2022dated.20.12.2024.pdf
ATTACHMENT
ACS-5toIRSGCC2022dt.20.10.2023.pdf
ATTACHMENT
ACS-6toIRSGCC-2022.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_4ACS-4toIRSGCC-2022.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022-POLICY_13.12.2022.pdf
ATTACHMENT
GCC2022ACS-3_20230426_114140_1.pdf
ATTACHMENT
IRSGCC-APRIL-2022_1.pdf
ATTACHMENT
ACS10toIRSGCC2022.pdf
ATTACHMENT
ASC-7-dt25.09.2024toIRSGCC-2022.pdf
ATTACHMENT
ACS-9toIRSGCC-2022.pdf
ATTACHMENT
SCC112025.pdf
ATTACHMENT
ACS11toIRSGCC.pdf
ATTACHMENT
WeblinkaddressforTechSpecificationforDSRUSSORitems.pdf
ATTACHMENT
Steel2024.pdf
ATTACHMENT
TSforTrack-2022.pdf
ATTACHMENT
TS-CEMENT-2020REV.pdf
ATTACHMENT
TSTRANS1.pdf
ATTACHMENT
GuidelinesforexeuctionofROBRUBFOBisuedbyPD_1.pdf
ATTACHMENT
CompositeWorkTechnicalSpecGINRCAVCVCGNNRMVY.docx1.pdf
ATTACHMENT
SCCElectricalforCompositeWorks-GINRCAVCVCGNNRMVY.docx1.pdf
ATTACHMENT
Compositetenderdocument1707261.pdf
ATTACHMENT
ProgrammeChartGNRMiscworksHPT-BAY.pdf
ATTACHMENT
AddlSplConditionsforConcrete.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].