SPECIAL REPAIRS TO MTR AND S OFFICE AND STORE, ADDN / ALTN TO BUILDING NO. T-57 (REB(T)) AND PROVN OF KOTA STONE WORK IN STN LGS SECTION AND VIEWERS GALLARY AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

Amount

NOTES :- In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly.

Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding and Ridge to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding and Ridge to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates (Fe 410-W Gde-E-250 quality-A) complete all as specified and as directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed.

S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L Preparing new steel Surfaces of any any description over 10cm width or girth and appling two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets/frame/hangers etc all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium snap grid frame work size 605 x 605mm for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for Non asbestos fibre cement building boards 6 mm thickness fixed or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed.

Demolition of brick work or stone/ boulder or block masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth (without using extra cement) complete all as specified.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 , finished even and smooth (without using extra cement) complete all as specified

M&L for Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of Alkali resistant Primer over a coat of 2 mm thick wall care putty, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and as directed.

M & L 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) in sub base of floorings complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

S&F Non - skid joint free Ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per item above but in skirting 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

M&L for Non Skid joint free colored ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE..

M&L for joint free coloured glazed ceramic tiles of size 300 x 450mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

M&L for complete removal of existing treatment (upto plaster surface) of old painted surfaces including 2mm thick wall care putty and applying two coats of distemper oil emulsion on surfaces of walls over a coat of alkali resistance primer.

Taking down Chowkats or frames with shutters not exceeding 1.5 Sqm each (Without taking off shutters from the frames)

Taking down Chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame)

S & F Factory made single extruded WPC(Wood Polymenr Composite) solid door/window/Ceosetory windows and other Frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated witgh miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame densityy of 750 kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), miimum compressive strength of 58 N/mm2, modules of elasticity 900N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of requred dia and length complete as per direction of Engineer-in-charge. (M.S hold fast/lugs or SS dash fasteners shall bne paid for separately) manufacturers instructions and as directed by Engineer-in-Charge.

S&F Factory Made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powedr/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face ) and 900 N (Edge), minimum compressive strength 50 N.mm2, modulus of elasticity 850 N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge.

S&F, 100mm size medium weight cold rolled mild steel butt hinges, medium weight complete all as specified and as directed.

S&F, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F Anodised aluminium Powder coating (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, partitions with one or more rebets including jointing cleats for fixing etc complete all as specified

S & F Aluminium (Die cast ) body door closer hydrolically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or aluminium beading complete all as specified and as directed.

S&F 4.80mm thick sheet glass ordinary quality fixing with putty/beading in square n exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L, 18 to 20mm thick, approved machine cut, coloured Granite, factory polished, edges rounded in steps, cooking platform and the like laid over and including screed bed or bedding layer 20mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.

Demolition of cement concrete (unreinforced and including tiles) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed by Engineer-in-charge.

M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling, mass concrete etc complete all as specified & directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x25mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors over 15mm thick cement screed bed in cement and sand mortar 1:6 complete all as specified and as directed.

S&F vitreous china ware wash hand basin 470 x 470 x 110mm size Table Top Basin Make JAGUAR Cat No FSS-WHT-29901 or equivalent in Hindware/Cera

S&F in repair Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed

S&F angle valves 15 mm bore cast copper alloy, chromium plated crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as speciifed and as directed.

S&F 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F Single Lever mini Basin mixer without Popup waste system with 450mm ling Braided Hoses Make JAGUAR Cat No FLR-5025B or equivalent in Hindware/Parryware.

S&F in repairs vitreous china wash down water closet pedestral pan white/ coloured, including, plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repairs white /black plastic seat cover solid confirming to ISI any type complete all as specified and directed.

S&F in repair 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.

S&F Towel Rail 600 mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs all as specified and directed.

S&F health faucet with fluxi pipe and hand shower the length of hose 1m fitted to the tap make JAGUOR Code ALD CHR 565 or equivalent in Hindware/Cera.

S&F CP 2 way bib cock, Make JAGUAR Cat No 38041 or equivalent in Hindware / Parryware

M&L, preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 in sub base using 20mm graded stone aggregate finishing the surface even and rough including necessary formwork complete all as specified and directed

M & L for machine cut kota stone slab flooring 18-20 mm thick over and including screed bed or bedding layer 20mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for preparation of old painted surfaces of wall and applying one coat of cement base paint complete as all specified.

Taking down shutters of any description from the frames exceeding 1.00Sqm but not exceeding 2.00Sqm and resecuring in the same opening complete all as directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of distemper oil emulsion, complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge.

Taking down unserviceable MCB DBs, Metal clad DBs along with MCCBs/MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed by the Engineer-in-charge.

Taking down unserviceable Security light of any description including service bracket, clamps nut bolts etc,.

M&L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn through and including non metalic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings), provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specified and as directed for the following:-

(a) One light point controlled by one one way switch .

(b) One ceiling fan point controlled by one way switch.

(c) One Exhaust fan point controlled by one way switch.

(d) One 3 pin socket outlet 5 Amps on the same board with other switches.

(e) One 3 pin socket outlet 5 Amps on the Independent board.

(f) One bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per item here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge.

S&F for Modular switch 6A, 1 way complete all as specified and as directed.

S&F for Modular switch 16A, 1 way complete all as specified and as directed.

S&F for Socket outlet 6A modular independent board complete all as specified and as directed.

S&F for Socket outlet 6A modular same board complete all as specified and as directed.

S&F for Socket outlet 16A modular complete all as specified and as directed.

S&F for switch bell push modular complete all as specified and as directed.

S&F for Stepped type fan regulator(4steps), 120 W-2 modular complete all as specified and as directed.

S&F Electric bell/ buzzer 230 volts, single pole, 240 V complete all as specified and as directed.

S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body complete all as specified and as directed.

S&F for Modular Telephone socket complete all as specified and as directed.

S&F for Modular TV socket complete all as specified and as directed.

M&L for rigid non- metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, sadles, pipe hooks etc. of size 20 mm dia for Tele & TV points complete all as specified and as directed.

S & F in repairs, wall mounted 10W, 6K,LED light fitting 2' with all in one fixture extruded aluminium heat sink provided for efficient heat dissipation & intergrated electronic driver, internally pre-wired including two Nos PVC blocks and connecting up with twin core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and directed by Engineer - in - Charge

S & F in repairs, wall mounted 22W, 6K,LED light fitting 4' with extruded aluminium, heat sink provided for efficient heat dissipation & intergrated electronic driver, internally pre-wired including two Nos PVC blocks and connecting up with twin core twisted flexible copper conductor cable of suitable size upto ceiling rose. all as specified and directed by Engineer - in - Charge.

S&F LED luminaire 2'x2', 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for False roof ceiling as required including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by the Engr-in-charge. Make : Havells, LHEWEBP7IN1W042 'OR' equivalant in Phillips / CG.

Taking down ceiling / wall mounted fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying including reassembling blades and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan all as specified and as directed.

Dismantle the unserviceable rubber bush with clamping set, supply and fix rubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed by the Engineer-in-charge.

Providing suitable hole in stone masonary or any type of wall for Exhaust fan of 300 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall all as specified & as directed.

S&F MCB distribution board sheet metal powder painted Single pole & Neutral enclosre with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete including taking down existing DB sheet metal including MCB all as specified and as directed by the Engineer-in-charge, including taking down.

S&F for sheet metal enclosure for vertical distribution board when MCCB for in coming and MCBs for out going to be used VTPN 4 way , 415 volts double door complete including all as specified and as directed. Note :- MCCB and MCB will be measured and paid separately under relevant items.

S&F MCB distribution board double door type, SPN 12 way sheet steel powder painted with bus bar neutral link earth bar etc.

S&F MCCB 3 pole, 415V, fixed type, upto 100 Amps with breaking capacity 16 KA complete all as specified and as directed by the Engineer-in-charge.

S&F MCB SPN 40 Amps, 240 volts suitable for fixing in MCB DB 'C' series complete all as specified and as directed by the Engineer-in-charge.

S&F MCB SP 5 to 40 Amps, 240 volts, suitable for fixing in MCB DB 'C' series complete all as specified and as directed by The Engineer-in-charge.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades, and frame and louvers ,connecting wire and all accessories including taking down Existing exhaust fan and deposit to E&M store all as specified and as directed by the Engineer-in-Charge..

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistent complete with driver, lampbracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F LT UG Cables , XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, size 50 Sqmm, 4 core in trenches or fixed on pole/wall or drawn through pipes including suitable size Lugs & Glands etc complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in soft/loose soil for laying of cables/ for erection of poles/ for stay assembly etc complete all as specified and directed by Engineer-in-Charge.

Supply and spreading clean, fine, dry river sand in trenches for cushioning of under ground cable / inside transformer yard complete all as specified and directed by Engineer-in-Charge. Note: Only punned thickness shall be measured for payment purpose.

Supply and lay common burnt clay building bricks sub class 'B' of designation 75 laid in trenches as protection to cables complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and as directed by Engineer-in-Charge..

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge..

M&L for 50mm dia bore tubes, 'light grade' galvanised, with all fitting and fixed complete to walls/ poles or laid in trenches/ floors for cable protection complete all as specified and directed by Engineer-in-Charge.

S&F Wall mounted Busbar chamber of capacity 63 Amp, 4 way, made up of high quality materials and is rated for 63 Amps, 415 Volts including busbar of make : havells Model No - IHBC006304 or equivelent in Selvo/Powerline complete all as directed by Engineer-in- Charge.

Taking down change over switch and S&F new onload change over switch 200 Amps with sheet metal enclosure, TPN 415 Volts, 50 Hz, AC of the following sizes complete all as specified and as directed

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 4 mm galvanized iron wire as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 40mm dia med. gr. GI pipe for protection of galvanized iron strip in the ground, further connecting with GI wire 4mm dia to Distribution board, including excavation, earth work, Charcoal, Magnesium sulphate 50 Kg, Bentonite 25 Kg, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I including taking down old U/S earthing. all as specified and as directed by the Engineer-in-Charge.

Taking down old UNSV Metal Clad enclosure & Supply and fix Single Pole & Neutral Metal clad enclosure with a two pin and earth plug and socket including one single pole MCB of 20 Amps in repair complete all as specified and as directed by Engineer-in-Charge

Supply and laying 20 mm GI tubing medium grade ISI marked with all fittings fixed complete to walls and ceiling or laid in floors incl. making good of disturbed surfaces and complete all as specified and as directed for the following sizes :-

KOGANTI CONSTRUCTION COMPANY (BID ID -3376500)

M/S P.SWAROOP KUMAR (BID ID -3376763)

NEWS CONSTRUCTIONS (BID ID -3377510)

VACON INFRASTRUCTURES (BID ID -3377122)

K P R ENTERPRISES (BID ID -3375620)

SRI LALITHA CONSTRUCTIONS (BID ID -3377292)

M/s D.Krishna Varma (BID ID -3375147)

M/S V PRATAP REDDY (BID ID -3375650)

SURA INFRASTRUCTURE (BID ID -3377271)

CHATLAPALLY NAGENDER (BID ID -3377769)

SAI RAM CONSTRUCTIONS (BID ID -3377480)

SRI BHAVANI ENTERPRISES (BID ID -3377340)

GNV Engg Services (BID ID -3375976)

J R CONSTRUCTIONS (BID ID -3374827)