Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-Finance | ₹4.3 L | L1 | Accepted-Finance below the estimate |
| 2 | L2₹4.4 LRejected-Finance | ₹4.4 L | L2 | Rejected-Finance above the estimate |
| Sl No | Description | Qty | Unit | SRI BALAJI ENGINEERING AND ELECTRICAL WORKS L1 | ARUPADAI AGENCIES L2 |
|---|---|---|---|---|---|
| 1.00 | Servicing, removing, dismantling, assembling, re-erection, pipe, specials of following items of work as follows( The cost of the existing damaged coil other than burned coil should be deducted ) | 1 | Nos | - | - |
| 2.00 | 2 HP Submersible Motor | 1 | Nos | - | - |
| 3.00 | Motor Rewinding Charge | 4 | Each | 3,292.2 ₹13,168.80 | 3,300 ₹13,200 |
| 4.00 | Replacement of cover sleeve | 4 | Each | 1,168.2 ₹4,672.80 | 1,200 ₹4,800 |
| 5.00 | Shaft welding on two sides | 4 | Each | 1,286.2 ₹5,144.80 | 1,290 ₹5,160 |
| 6.00 | Replacement of Thrust Bearing’s | 4 | Each | 1,699.2 ₹6,796.80 | 1,700 ₹6,800 |
| 7.00 | Lathe work and fixing charge | 4 | Each | 1,144.6 ₹4,578.40 | 1,150 ₹4,600 |
| 8.00 | Replacement of brass bush & clutch pad | 4 | Each | 1,876.2 ₹7,504.80 | 1,900 ₹7,600 |
| 9.00 | Replacement of “O” ring & oil seal | 4 | Each | 348.1 ₹1,392.40 | 355 ₹1,420 |
| 10.00 | Replacement of circlip lock | 4 | Each | 407.1 ₹1,628.40 | 410 ₹1,640 |
Tender Value
₹4.5 L
EMD Value
₹4,450
Closing Date
10 Feb 2026, 3:00 pmClosed
Commissioner
Panchayat Office Road, Sankagiri Municipality
Repairs and Maintenance to the Borewell Hand pumps Borewell Pumpsets and Air Compressors at Ward nos. 13 to 18 in Sankagiri Municipaity
2026_MAWS_650197_1
555-18/2025/E1
Open Tender
Civil Works - Water Works
90 days
Sankagiri Municipality
As per norms
2 documents required · 2 mandatory
₹0
₹4,450
6 Apr 2026
2 Feb 2026
10 Feb 2026
2 Feb 2026
10 Feb 2026
2 Feb 2026
2 Feb 2026 - 10 Feb 2026
Servicing, removing, dismantling, assembling, re-erection, pipe, specials of following items of work as follows( The cost of the existing damaged coil other than burned coil should be deducted )
2 HP Submersible Motor
Motor Rewinding Charge
Replacement of cover sleeve
Shaft welding on two sides
Replacement of Thrust Bearing’s
Lathe work and fixing charge
Replacement of brass bush & clutch pad
Replacement of “O” ring & oil seal
Replacement of circlip lock
2 HP Submersible Pump Over Handling :
Replacement of PVC impellor
Replacement of brass bushes
Replacement of S.S. bushes
Lathe works & fixing charge
Replacement of rubber bush
5 HP submersible Motor :
Motor Rewinding charge
Replacement of cover sleeve
Shaft welding on two sides
Replacement of Thrust Bearing’s
Lathe work and fixing charge
Replacement of brass bush & clutch pad
Replacement of “O” ring & oil seal
Replacement of circlip lock
5 HP Submersible Pump Over Handling :
Replacement of brass impellor
Replacement of brass bushes
Replacement of S.S. bushes
Lathe works & fixing charge
Replacement of rubber bush
7.5 HP Submersible Motor :
Motor Rewinding charge
Replacement of cover sleeve
Shaft welding on 2 sides
Replacement of thrust bearings
Lathe work and fixing charge
Replacement of brass bush & clutch pad
Replacement of “O” ring & oil seal
Replacement of cir clip lock
7.5 HP Submersible Pump Side :
Replacement of brass impellor
Replacement of brass bushes
Replacement of S.S. bushes
Lathe works & fixing charge
Replacement of rubber bush
10 Hp Complete Winding Submersible labour
10 Hp Complete Winding Open well labour
10 HP Panal Board
10HP Thrust bearing labour
(i) 2.00 HP Control Panel Starters :
Replacement of No volt coil
Replacement of Over load replay
Replacement of contractor
Replacement of starter contacts
(ii) 5 HP / 7.5 HP Control Panel Starters :
Replacement of No volt coil
Replacement of Over load replay
Replacement of contractor
Timer
Volt meter
Ammeter
Single phasing preventers
Replacement of starter contacts per
Service & fitting charges
Removal and rerection of submersible pump set in the existing borewell.
Up to 5.00HP submersible pumpset
Above 5.00HP - 10.00HP submersible pumpset
Above 10.00HP - 20.00HP submersible pumpset
Conveyance of power pump set and its accessories from the site uto 10km
Re-erect. of submersible pumpsets and its accessories from borewell for attending repairs. (above 5 HP)
submersible cables and service cable.
Replacement of 2.5 sq.mm 3core flat cu.cable - 1RM
Replacement of 4.0 sq.mm 3core flat cu.cable - 1RM
Supply and run of 2 of 4 sqmm cu Conductor for Service Connection main
Supply and run of 4 of 6 sqmm cu Conductor for Service Connection main
4 Sq.mm Aluminium Wire (1 coil)
7/18 Aluminium VIR Wire (1 coils)
(i) GI Pipe
32mm dia GI Pipe "B" Class
40mm dia GI Pipe "B" Class
50mm dia GI Pipe "B" Class
(ii) GI Specials
32mm dia GI Union
32mm dia GI Elbow
32mm dia GI Tee
32mm dia GI Coupling
40mm dia GI Union
40mm dia GI Elbow
40mm dia GI Coupling
50mm dia GI Union
50mm dia GI Elbow
50mm dia GI Tee
50mm dia GI Coupling
(iii) UPVC pipe.
Replacement of 32mm UPVC pipe
Replacement of 40mm UPVC pipe
Replacement of 50mm UPVC pipe
Attending repairs to deep borewell Hand pumps for bore well including removal of GI pipe plunger rods cylinders and re-erection hand pumps including loering the GI pipe plunger rods, Cylinders etc., complete
a) Up to 30.00m
b) Above 30.00m
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_779551.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.65 MB
BOQ_779551.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid