Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹36.0 L+₹27,215 (0.76%)Rejected-AOC | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹36.6 L+₹85,914 (2.41%)Rejected-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹37.4 L+₹1.7 L (4.70%)Rejected-AOC | L4 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹45.0 L
EMD Value
₹90,100
Closing Date
30 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_600647_1
8400-986/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
Yes
GE PANAGARH
₹90,100
Yes
21 Jul 2023
2 Jun 2023
1 Jul 2023
2 Jun 2023
30 Jun 2023
16 Jun 2023
Amount
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed
S&F 15mm dia bore GI tubing medium grade with all fittings to walls, ceiling or laid under floors complete all as specified and directed
M&L for refixing of 15mm bore old steel tubing and connections in new or old position (walls, ceiling, floors etc complete all as specified and directed (Note: Old pipe to be obtained vide item No 01.00 above)
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed
S&F 20mm dia bore GI tubing medium grade with all fittings to walls, ceiling or laid under floors complete all as specified and directed
M&L for refixing fo 20mm dia bore old steel tubing and connections in new or old position (walls, ceiling, floors etc) complete all as specified and directed (Note: Old pipe to be obtained vide item No 04.00 above)
S&F in repairs vitreous china Wash down water closet (Pedestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc (excluding cost of flush tank) complete all as specified and directed
S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, excluding flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed
S&F as in repairs 15mm dia Stop valves fancy type, cast copper alloy,,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F as in repair 15mm dia Bib taps, cast copper alloy with handle, chromium plated fancy type, long body with wall flange screwed down, suitable for 15 mm bore pipe, complete all as specified and directed
S&F as in repair 15m dia concealed stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and directed.
S&F as in repair Vitreous China wash basin, white, flat back, size 550 mm x 400 mm, including fixing accessories like galvanised brackets & rag bolts complete all as specified and directed
S&F as in repair Waste coupling of PTMT(half or full threaded) (minimum wt 45 gm dia of discharge pipe 32 mm complete all as specified and directed
S&F 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed
S&F as in repair 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed
S&F Chromium plated Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union in repair complete all as specified and directed
S&F as in repair PVC valve less symphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes set with concrete and making good to floor complete all as specified and directed
S&F as in repair Grating square with slit, with or without hole of PTMT (Minimum weight 100 gm) made in two parts for smell and mosquito proofing with 25 mm water seal fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment complete all as specified and directed
S&F as in repair PVC bends plain (any radius) for 110mm bore PVC pipes complete all as specified and directed
S&F as in repair PVC bends plain (any radius) for 75mm bore PVC pipes complete all as specified and directed
S&F as in repair 75mm dia PVC SWR pipe fixed to wall set in cement mortar with and including PVC clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc including demolition PVC rain & removing from site complete all as specified and directed
S&F as in repair 110mm dia PVC SWR pipe fixed to wall set in cement mortar with and including PVC clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc including demolition PVC rain & removing from site complete all as specified and directed
S&F SWR Junction single 'T' equal or unequal of 75mm dia complete all as specified and directed
S&F SWR Junction single 'T' equal or unequal of 110mm dia complete all as specified and directed
S&F as in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
S&F as in repair 32mm dia PVC waste pipe 800mm long complete all as specified and directed
S&F as in repair Plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed
S&F as in repair kitchen sink of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar & providing cantilever brackets and west pipe, overall size 495mm x 420mm & bowl size 410mm x 330mm x 160mm complete all as specified and directed
S&F as in repair kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories,bowl size 600mm x 600mm x 250mm complete all as specified and directed
S&F as in repair PVC connections with non corrosive symet nuts & washer, 450 mm long suitable for 15 mm bore pipes/fittings, ISI marked complete all as specified and directed Make: Prayag/Polytuf
S&F in reapirs Cromium plated Tubular towel rail, 20mm dia, D type, 600mm long between flanges complete all as specified and directed.
M&L for 6 mm thick asbestos cement corrugated or semi- corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts, including dismantling of sheet complete all as specified and directed
All as per item No 33.00nhere-in above but except sheeting, including dismantling of sheet complete all as specified and directed.
M&L for asbestos cement two piece serrated ridge for corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked bolts, including dismantling of ridge, hips, valley complete all as specified and directed..
S&F for Pre-painted galvalume aluminium zinc coating @150 GSM GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified and directed.. as specified including dismantling of sheet complete all as specified and directed..
S&F for Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified and directed.. as specified including dismantling of sheet complete all as specified and directed.
Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as specified and directed.
S&F wind ties for roof including securing bolts,flat iron fillets(for securing weather boarding with screw bolts and nuts) including all necessary drilling,bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 including painted with one coat of zinc chromate primer paint (including preparation of surface at contractor's workshop before fabrication) complete all as specified and directed..
S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed..
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed..
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete shall as specified.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-chargeetc complete all as specified and directed.
S&F 18mm thick Prelaminated particle board, exterior prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed..
M&L for 15mm thick rendering in CM (1:4) mixed with water proofing compound on external surfaces of brick masonry wall finished even and smooth with out using extra cement fair complete all as specified and directed.. (Note : Water proofiing item to be paid separately)
S&F floor door stopper of brass body 140 mm long and tongue with rubber shoes complete all as specified and directeded.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified and directed..
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directeded.
Supply only water proofing compound complete all as specified and directed (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for Glazed ceramic coloured tiles in vertical surfaces (250mmX350mm) 7mmx450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match, with backing coat 10mm thick in CM (1:3) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directeded. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for Joint free Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of floor hearth or wall tiling incl cement martar bedding complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for Joint free Non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.06Sq.m but not exceeding 0.11 Sq.m, in floors & skirting etc. over & including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, including dismantling of floor hearth or wall tiling incl cement martar bedding complete all as specified and directeded. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured (Dark shade) and including 15mm thick screed bed in cement mortar 1:6, including dismantling of floor hearth or wall tiling incl cement martar bedding complete all as specified and directed. and directed.and directed (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)
M&L for 20mm thick black granite slab (width and length as per site requirement) bedded over including 15mm thick screed bed or bedding layers in CM (1:4) including making holes and bull nozed moulding on edges and jointed with cement slurry and pointed with white cement with the admixture of pigment to match complete.
Rounding of / moulding to edge (half round) of granite stone of any description including rubbing and polishing, complete all as specified and directed..
Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, corner shelf and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed..
M&L 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified and directed..
M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed..
M&L extra for forming fair finished drain or channel 30cm innner girth in cement concrete, using extra cement including forms, mould, mitread stop ends etc complete all as specified and directed.
M&L for 25 mm thick, cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregat), finishing cement concrete surface even and smooth without using extra cement, as in floors, complete all as specified and directed..
M&L for 50 mm thick Cement concrete type B- 1, 1:2:4 (using 20mm graded stone aggregate) stone as in flooring (with nominal reinfrorcement) complete all as specifed and directed. (Note:- Reinforcement shall be measured & paid separetly)
M&L for fly ash brick old size straight or curved on plan exc 6 mtr mean radius built in CM (1:6) ,including demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specifed and directed.
M&L for flyash Brickwork straight or curved on plan to any radius in half brick thick walls built inin CM (1:4) including demolition of old brick work complete all as specifed and directed.
M&L for rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in CM (1:4), including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed..
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in CM (1:6) complete all as specified and directed..
Rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in CM (1:3), including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed..
M&L for preparation of new plastered surfaces of wall and applying two coats oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for preparation of old wall surfaces and applying one coat of distemper oil emulsion on wall surfaces complete all as specified and directed (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for two coats of white washing on old ceiling/chajja surfaces including preparation of ceiling surfaces complete all as specified and directed..
M&L for applying three coats of white wash on ceiling on new plasered surfaces including preparation complete all as specified and directed..
Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..
Mild steel TMT bars10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..
M&L for Reinforced cement concrete, type A-1 (1:1½:3), using 20 mm graded stone aggregates as in slabs supported on walls, beams and Chajja , columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including demolition of reinforced complete all as specified and directed..
Form work to sides and soffits of floor roof beams, beam haunching , girders, bressummers lintels, cantilevers, shelves including supports, edges, over hangs, etc also splays between floors and beams etc complete all as specified and directed
M&L for hardcore of broken stone of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm stone aggregate) as in Sub base or base course finished even annd fair complete all as specified and directed
M&L for 100 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) finishing smooth & even with using extra cement complete all as specified and directed
S&F glass dividing strips, 3mm thick and 38mm wide and inserted in position to confirm to design complete all as specified and directed
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid in any mortar complete all as specified and directed
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S&F as in repair 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes including Hacking out old broken glass complete all as specified and directed..
S&F 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes including Hacking out old broken glass complete all as specified and directed..
S&F as in repair Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, including hacking out old broken glass complete all as specified and directed..
Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.
All as per itme No 85.00 mentioned here-in-above but without glazing bars complete all as specified and directed,
Taking down door / window frame with shutter (without taking of shutter from the frame ) area not exc 1.5 sqm complete all as specified and directed.
Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.5 but n exc 4sqm complete all as specified and directed.
Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed
S&F factory made solid panel PVC door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50mmX100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
All as per item No 92.00 mentione here-in- above but size of frame 50mmX125mm complete all as specified and directed
S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative panelled decorative flush door shutter one side plain on other side of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F Factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, (two panel ) with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed
S&F glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 ,and shop coat of pink primer, including complete all as specified and directed.
All as per item No 96.00 but 30mm thick wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed
S&F 2nd class hard wood plain solid straight chowkat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed
M&L for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in CM (1:3) or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
S&F hold fasts inserted brick wall complete all as specified and directed..
M&L for aluminum sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked complete all as specified and directed..
S&F Aluminium handles, extruded anodized of size 150 mm, ISI marked, complete all as specified and directed..
S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all specified and directed
Refixing of shutters of any description exceeding 1 sqm but not exc 2 sqm each in same opening after securing or easing & adjusting, complete all as specified and directed..
M&L for S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed..
M&L for two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified and directed..
M&L for \wo coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed
M&L for two coats of synthetic enamel paint over old wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified and directed..
M&L for two coats of synthetic enamel paint old steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed
M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed.
Demolition of plain cement concrete in roof, floor, staircases, landing, chajjas and similar suspended work n.exc 15cm thickness and removing rubbish off the premises complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in CM (1:4) complete all as specified and directed.
M&L for preparation new surfaces or roof and applytwo coats of polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming @ one litre oer ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/ seepage from roof/ wall complete all as specified and directed by the Engr-in-charge Note:- (i) As per description of these item minimum two coats of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price asjustment shall be made, if as per manufacturer instructions more coats of polyurethene )PU) acrylic based water proofing liquid compound & primer are required for roof treatment. (ii) Quoted rate shall be deemed to be included for work in buiding/ structure of any height.
S&F Brass CP bracket fancy type suitable for fixing of 25 mm dia curtain rods complete all as specified and directed
S&F in repairs MS drapery rod of 25 mm dia of PVC coated in curtain rod complete all as specified and directed
S&F in repairs MS PVC sheeted/powder coated bracket size 150 mm made to shape suitable for holding curtain/drap drapery rod of 25 mm dia of PVC coated in curtain rod complete all as specified and directed
S&F stainless steel rod 25mm dia as in curtain rod including decorative brackets as directcted
S&F Anodised aluminium snap grid (605mmX605mm ) frame work for false ceiling including dismantling complete all as specified and directed..
M&L for hanger 6mm dia G.I (upto 1200 mm length) adjusted level fixed to roof slabs by means of ceilling cleat made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40 mm long including dismantling complete all as specified and directed.
S&F for 6mm thick 'E' board (non asbestos fibre) designer building boards fixed in aluminum frame work in ceiling flat or sloping with screws including dismantling of wall or ceiling boards complete all as specified and directed..
S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as directed by Engineer-in-Charge.
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
UNITED BUILDERS
ARUP KUMAR GHOSH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .