REPAIR / REPLACEMENT OF JOINERY DOORS, WINDOWS, CUPBOARDS, KITCHEN CUPBOARDS AND CONNECTED B/R NATURE WORKS AT BAIRD PLACE AND POLO ROAD MESSES (GARUDA, ASC, IML, AAD), SW COMD HUT, S COMD HUT IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkat or frames with shutters ( without taking out shutters from frame ) exc. 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.

Taking down chowkat or frames n. exc. 1.5 sqm each with shutters (without taking off shutters from frames) complete all as specified and as directed.

Taking down shutters of any description exc.1.00 sqm and n. exc 2.00 sqm each complete all asspecified.

S&F Plain , solid , straight chowkhats and frames of 2nd class hard wood, wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed.

S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conform-ing to Fe 410-0 or Fe 310-0 complete.

S&F Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow of frame with PCC 1:3:6 etc. complete,all as specified and directed.

Description all as per srl item No. 6 above but frame size 125x60mm

S&F factory made 35mm thick 2nd class hard wood glazed and sekeleton shutter's open rebated prepare to receive glass gouge etc edges of framing plain chamfered or ronded fitted with cut and mitered bead's for securing glass gauge etc size of marker of shutters as per SSR Part-I sec-8 clause 8.2(a).

S&F factory made 35mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides.

S&F 35mm thick pre laminated flush shutter, solid core construction, with block board core and designed face Pre- lamination finish on both sides as approved by Engr in charge.

S&F 2nd class HW 30mm thick Plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers including applying two coats of synthetic enamel paint over one coat of pink primer complete as specified and as directed.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F of factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam coloured PVC Sheet on both face, supplying & fixing in frame at site as per secification & directed

S&F 100mm long butt Hinges, medium weight, cold rolled mild steel fixef in repair complete.

S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.

S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed all as spd and directed.

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed

S&F mild steel 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long.

M&L Resecuring or Easing and adjusting , without taking down shutters of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area not exc 2 sqm each complete all as specified and directed.

Aluminium alloy powder coated (50 micron) anodized door, with frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock (Make :- Godrej), & double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed.

S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 5.5mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including frame necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge.

S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including frame and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2no.) ,aluminium tower bolt 100 mm long (2no.),suitable handle (1 No.) complete all as specified.

S&Faluminium anodized grills with 6mm x 5mm aluminium section having square mess size 100mm with fixing arrangement complete all as specified and directed

Box type Steel windows with double shutters (inside for wiremesh & out side for glass), hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded .WIRE MESH –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate . Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw . Note: The glazed/Guaged shutter including guard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. The rate quoted by the contractor is deemed to inclusive two coat of paint over a coat of primer of all aspects incl all fitting,glass,wire mesh,guard bar , as specified in Drg No CEDZ/TD/289 sheet 1 R/2 and 2R/2.

Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden/metal frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads

S&F 4mm thick Figured glass, pinhead type with oil putty in squares n exc 0.5 sq. m each pan complete all as specified.

S&F stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. Note- Welder with welding machine reqd to fix wiremesh in old steel windows.

M&L two coats of synthetic enamel painting on new/ old steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces

M&L two coats of synthetic enamel painting on new wooden surfaces of any description over 10 cm in width or girth not otherwise described over a coat of pink primer.

Dismantling wall and ceiling boards ( fibre pulp, insulation etc ) or insulation boards/ slabs/ blank ets, any thickness, incl cover fillets all as directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx x 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center. Including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long complete all as specified and as directed.

S &F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) including sunk or raised mouloding complete all as specified and as directed.

M&L for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I ( u p to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed.

M&L for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed.

S&F in repairs of Modular wardrobe,cupboards, cabinets, drawers , shelfs, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm) etc , all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8 - 10 mm thick HDHMR board (Action tesa or equivalent ) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations . All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less or SS handel, telescopic channels 18'' / 20'' long , rollers for smooths sliding of drawers magnetic catch, etc as required complete all as specified and directed by Engr-n-charge. (Note: Only front face shall be measured and paid irrespective of area of HDHMR boards provided and fitting as required shall be deemed to be included in unit rate quoted)

S&F in repair Continuous( piano) hinges(width of flaps 40mm when open , mild steel ,bright finish or electrogalvanised

S&F Magnet ball catcher with 8mm dia steel ball of approved qualities complete all as specified

S&F 150mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished

S&F telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed

S&F in replacement Drapery rod 25mm dia aluminium, powder coated teak wood texture finish 1 mm thick, with end bulbs as reqd, fixing brackets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified

M&L for repair to existing steel rolling shutters/ gates by repairing/welding/ oiling/ greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs including two coats of paint complete all as spd and directed.

M&L for repair to existing steel window/door by welding/replacing hinges/handle or removing the steel window shutters from the frame and re-fixing after making serviceable all as specified

S&F 1.00 mm thick plain black steel sheet in hearths; covering to door shutters; covering to doorchowkats (frames);chullah hoods; water tanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required incl priming complete all as specified and directed.

M & L framed work such as grills, grating,gate etc with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work confirming to Fe - 290-0 or E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, fixed in repair complete all as specified and directed.

S&F Aluminium (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutter of 701 to 851mm in width and of weight between 36 to 60 kg, fixed in repairs, complete all as specified and as directed.

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

M&L for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.

M&L for Vitrified Ceramic light shed Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles over and including 15 mm thick screed bed in CM 1:6 incl removing tiles to defence land and rubbish off the permises complete all as specified.

Description all as per srl item No. 56 above but on vertical surfaces such as skirting / dados including 10 mm thick CM 1:4 as in backing coat, complete all as specified and directed.

M&L for coloured non skid ceremic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 incl removing tiles to defence land and rubbish off the permises, complete all as specified and directed.

M&L for glazed coloured ceremic tiles sizes 450x300x 7mm thk tiles on vertical surfaces , such as skirting/dado, over and incl 10 mm rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles, complete all as specified and directed.

S&F in replacement stainless steel kitchen plate rack size 900 x 750 x 250 mm deep made out of 1mm thick sheet including fitting arrangement complete. Make- Maharaja/Nirali/Prayag

Taking down cement or lime plaster any description on brick or stone walls,ceilings etc including recking out joints hacking for key scrubbing down with waters and removal of rubbish from the premises as directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fare faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified.

M&L for preparation of new/ old plastered surface of walls and applying two coat of cement base paint over 2mm thick coat of wall care putty and a coat of Primmer, Priming plastered and other surfaces with alkaliresistant priming paint on walls complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified.

M&L for preparation of new/old plastered surface of of walls and applying two coat of OIL bound distemper a coat of primmer with Chalk whiting, on plastered surfaces, prepara-tory to distempering over 2mm thick wall care putty on walls complete all as specified and directed.

Rendering 5mm thick in cement mortar 1:3 on fare faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement in ceiling, complete all as specified.

M&L for preparation of new plastered surface of ceiling and applying three coats of white washing and preparity to plastered surface, complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado, floor & vertical surface laid over cement screed and including 10 mm thick CM 1:3 as in screed/ backing coat and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specifed and dircted .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specifed and directed.

M & L for providing RCC 1:2:4 type B- 1 using 20 mm grade stone aggregate as in slab supportetd on walls, shelves, Chajjas, cantilevers or similar work including necessary form work and complete all as specified and as directed.

M&L TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

S&F in replacement solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of salvent cement and fixing at site including of PVC frame of size 5mm thick PVC sheet fillet of width 35mm as per specification and drawing.

M&L for Preparation of new/ old plastered surface of wall and applying approved Designer wall Paper rollover acoat of priming coat including 2-3 mm thick wall care putty on newly/ old plasterde surface over plaster of paris putty of 2 mm thick including removal of existing treatment on surface of walls by scrapping down with mechanical grinder complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and including cutting chasing of wall, complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240

S&F in 10 mm thick slected quality toughned glass Plain or full frosted cut to size and shape as per site requirment for fixing in doors, windows, hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required and includind all necessary fixing arrangement for partition or door and with lock and self closing device (Fixed type windows should be MS framed powder coated with Georgin pattern) as approved and directed by Engr-in-Charge complete all as specified and directed. Make - Modi/ Saint Gobin or equivalent.

S&F Door handle H type 25x300mm (Model No-IGH- 55 of make. Insta or equivalent as approved by GE complete all as specified and as directed.

M&L for Grinding, polishing /bevelling of edges on 12mm thick or more toughened glass complete all as specified and as directed.

M&L for Steel rolling shutters, in repair with out ball bearing, with thickness of laths 1.00 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or Manual type, in replacement, complete all as specified and as directed. Note : Area of opening should be measured for payment purpose.

S&F for 2 mm thick Plain colour PVC sheet fixed with screw over any type of MS/steel gate grill etc. omplete all as specified and directed.

S&F curtain rod/ rail with stainless steel rod fancy type 25 mm dia including bracket and fancy type lattoo, etc complete all as specified and directed.

M&L Resecuring or Easing and adjusting sliding doors, (with/without taking down shutters) for easy opening /closing, by repair/replaceing tracks, sliding wheels, clits, doors etc and changing its position or adjustment of tower bolts/sliding bolts area not exc 4 sqm each complete all as specified and directed.

Vipul Construction (BID ID -3491502)

MAA SANTOSHI ENTERPRISES (BID ID -3486856)

M/S SIMRAN CONSTRUCTION CO (BID ID -3486690)