Renovation of erstwhile Mg. Store building for new R and D facilities in Mg. Plant Nildih of CSIR-NML, Jamshedpur

Amount

Demolishing reinforced cement concrete manually / by mechanical means and disposal including stacking of steel bars and disposal of unserviceable material within 50 meter lead as per direction of EIC.

Demolishing Brick work in cement mortar manually / by mechanical means including stacking of serviceable materials and disposal of Unservercible material within 50 meter lead as per direction of EIC. In Cement mortar.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead .

Demolishing cement concrete manually/mechanically means including disposal of material within 50m lead as per the direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix.

Dismantling doors, windows shutters including chowkhats,architrave,hold fasts,etc. complete and stacking disposal of material as per direction of EIC.

Of area 3sqm and below

Of area beyond 3sqm

Removing of building rubbish,malba, debries, unserviceable dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead for all leads including all lifts involved.

Extra for cutting reinforced bars mannualy / mechanical means in R.C.C work or R.B work(Payment shall be made on the cross sectional area of R.C.C or R.B work ) as per the direction of EIC.

Earth work in excavation by mechanical means/ manual means in foundation trenches or drains(not exceeding 30 cm in depth,1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottom including disposal of excavated soil lead upto 50m and lift 1.5 m as per direction of EIC. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, side of foundations etc. in layer not exceeding 20 ems in depth: consolidating each deposited layer by ramming and watering, lead up-to 50m and lift upto 1.5m.

Supplying and filling in plinth with sand under floors including watering , ramming, consolidating and dressing complete.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-treatment (excluding the cost of chemical emulsion):

Along external wall below concrete or masonry apron using chemical emulsion @ 2.25 per linear metre including drilling and plugging holes etc. With Chlorpyripos/ Lindance E.C. 20% with 1% concentration.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyripos/ Lindance E.C. 20% with 1% concentration.

Suppluing chemical emulsion in sealed containers including delivery as specified.Cholorpyriphos/lindane emulsifiable

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1cement:2coarse sand: 4graded stone aggregate 20mm nominal size.)

RCC work in beams, suspended floors,roofs having slope 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level excluding cost of centering,shuttering,finishing and reinforcement. 1:1.5:3 (1cement:1.5coarse sand: 3graded stone aggregate 20mm nominal size.)

Steel reinforcement for RCC work including straightening,cutting,bending,placing in position and binding all complete above plinth level. TMT bars of grade Fe-500 D or more.

Centering and shuttering including strutting,propping,etc. and removal of form for all heights:

Foundation,footings,bases of columns,etc.

Lintels,beams, plinth beams giders, bressumers and cantilevers

Weather shade, Chajjas corbels etc.

Brick work with common clay F.P.S ( non-modular brick of class designated 7.5 in foundation and plinth.Cement mortar 1:4 ( 1cement : 4 coarse sand )

Brick work with common clay F.P.S ( non-modular brick of class designated 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 ( 1cement : 4 coarse sand )

Half brick masonry with common burnt clay F.P.S (non modular) bricks of class designated 7.5 in foundation and plinth. Cement mortar 1:4 ( 1cement : 4 coarse sand )

Half brick masonry with common burnt clay F.P.S (non modular) bricks of class designated 7.5 in super structure above plinth level up to floor V level Cement mortar 1:4 ( 1cement : 4 coarse sand )

Extra for providing and placing in position 2 Nos 6mm dia M.S bars at third course of half brick work.

Providing and fixing of thickness 18 mm gang cut, mirrior polished ,premoulded and prepolished ,machine cut for kitchen platforms , vanity counters window sills, facia and similar locations of required size approved shade colour and texture laid on 20mm thick base cement mortar 1:4(1cement:4 coarse sand)joints treated with cement , mixed with matching pigment epoxy toch ups including rubbing ,curing ,mouldind and polishing to edge to give high gloss finisih etc. complete at all levels

Raj Nagar white marble / Udaipur green marble zebra black marble Area of slab over 0.50 sqm.

Granite of any colour and shade Area of slab over 0.50 sqm.

Granite of any colour and shade Area of slab upto 0.50 sqm.

Extra for fixing marble/granite stone, over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin based adhesive, including cleaning etc. complete.

Providing edge moulding to 18mm stone counters, Vanities etc.,including machine polished to edge to give high gloss finish etc. complete as per the desine approved by engineer in charge.

Marble work.

Granite work.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with das fasteners of required dia & length. Kiln seasoned and chemically treated hollock wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) as directed by EIC.

Providing and fixing flush door shutters conforming to IS: 2202 (part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked stainless steel butt hinges with necessary screws.

P/F bright finished brass hanging type floor door stopper with necessary accessories and screws, etc. as directed by EIC.

P/F IS : 3546 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screw etc. HAFELE make.

Providing and fixing aluminium tower bolt, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws,etc complete.200x10 mm as directed by EIC.

Providing and fixing IS : 12817 marked Stainless Steel Butt Hinges with necessary stainless steel screws etc. complete 50x37x1.5mm as directed by EIC.

Providing and fixing IS : 12817 marked Stainless Steel Butt Hinges with necessary stainless steel screws etc. complete 100x58x1.90mm as directed by EIC.

Providing and fixing magnetic catcher in cupboard/ward rode shutters with necessary screws etc. complete as directed (best make of approved quality). Double strip as directed by EIC.

Providing and fixing special quality bright finished brass cupboard/ ward rode locks with four lever including necessary screws etc. complete. 50mm as directed by EIC.

Providing and fixing bright finished brass 100mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete

Providing and fixing aluminum sliding door bolt ISI marked anodized (anodize coating not less than grade AC10as per IS 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16mm

Structural steel work in single section ,fixed with or without connecting plate ,including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete.

Structural steelwork welded in builtup section, trusses, grills and framework including cutting, hoisting and fixing in position and applying priming coat of approved steel primer all complete.

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 1:2:4 with floating coat of neat cement punning 40mm thick.

P/L polished vitrified floor tiles in size 600x600mm (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colors and shades ,laid on 20 mm thickness. cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigments etc. in complete.

P/L polished vitrified tiles in size 600x600mm (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades ,laid on in skirting , risers.12 mm thickness cement mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with grey @3.3 kg /sqm including grouting joint with white cement etc. complete 600x600mm.

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50micron) consisting of tee/ angle section of approved conforming to IS 733 in frames of false ceilling including aluminium angle cleat with screws etc. Level adjusting hangers shall be paid sepretely).

Providing and fixing 6mm dia G.I. level adjusting hangers of rods (upto 1200mm length) fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fastners 12.5mm dia. 40mm long complete as per direction of Enaineer-in- charge.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion(i) Single socketed pipes 110mm diameter.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Bend 87.5 degree --110mm diameter.

Shoe (Plain)--110mm diameter.

Single tee with door 110X110X110mm

15mm cement plaster on the rough side of single or half brick wall 1:4 (1cement :4 fine sand )

12mm cement plaster of mix 1:4(1cement:4fine sand)

6 mm cement plaster of mix 1:3( 1cement :3 fine sand )

Neat cement punning

Hacking of CC flooring including cleaning for surface, etc. complete as per direction of the EIC.

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by manufacturers

Finishing wall with waterproofing cement paint of required shade after by scrapping and sand papering and preparing the surface smooth with stagging: Old work (one or more coat applied @ 2.20kg/10sqm) complete.

Finishing walls with Acrylic Smooth exterior paint required shade .Old work (Two or more coats applied @ 1.67 Ltr/10sqm) on existing cement paint surface.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, including scraping,sand papering , preparing the surface smooth with putty,with all respect complete.

Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying priming coat with. ready mix red oxide zinc cromate primer of approved brand and manufacture on steel galvanized iron/ steel work

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq .meters and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground, all complete as per the direction of E.I.C With cement mortar 1:4 (Coarse sand).

Providing and laying non-pressure NP2 class (light duty) R.C.C pipes with collar joints with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc . complete 150mm R.C.C pipes

Constructing brick masonry manhole in cement mortar 1:4(1 cement:4 coarse sand)with R.C.C slab top slab with 1:2:4mix (1cement :2 coarse sand : 4 stone aggregate 20 mm nominal size) foundation concrete 1:4:8 (1cement :4 coarse sand : 8 stone aggregate 40 mm nominal size) ,inside plaster 12mm thick cement plaster with cement mortar 1:3(1cement:3 coarse sand)finished with a coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone aggregate of 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design Inside size 90X80 cm and 45 cm deep including C.I cover with frame (light duty) 455X610mm internal dimensions, total weight of cover and frame to be not less 38kg (weight of cover 23kg and weight of frame 15kg)With common burnt clay F.P.S (non modular) bricks of class

Providing & fixing anodized aluminum work for doors, windows, ventilators,cup Board shutter and partition with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285,fixed with pawl plug and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P brass /stainless steel screw, all complete as per architectural drawing and the direction of Engineer in Charge(Glazing and paneling to be paid for separately). For fixed Portion Anodized aluminum coated aluminum Minimum anodize coating of grade AC15.

Providing & fixing anodized aluminum work for doors, windows, ventilators,cup Board shutter and partition with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285,fixed with rawl plug and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P brass /stainless steel screw, all complete as per architectural drawing and the direction of Engineer in Charge(Glazing and paneling to be paid for separately).For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision of fittings whereever required including the cost of EPDM rubber /neoprene gasket required (Anodised tranparent or dyed to required shade according to IS1868, Minimum anodic coating of grade AC15)

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors, wherever required: White vitreous china Orissa pattern water closet pan of size 580 x 440mm with integral type foot rests.

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I./PVC flush pipe for back and front flush, with standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors, wherever required: Single squatting plate with 5 litre P.V.C. automatic flushing cistern.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid ,10 litre low level white P.V.C. flushing cistern , including flush pipe , with manually controlled device (handle lever), conforming to IS:7231,with all fittings and fixtures complete,including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white soild plastic seat and lid.

Providing and fixing toilet paper holder with 40mm long screws, rawl plugs etc. complete.C.P.brass.(Omco make heavy duty).

Providing & fixing unplastcised P.V.C connection pipe with PTMT Nuts Collar and bush of approved quality and colour.15mm nominal bore with 30 cm length.

Providing and fixing G.I. pipes ( JINDAL make) complete with G.I. fittings including trenching and refilling, etc. (External Work)

15mm dia NB

20mm dia NB

25mm dia NB

40mm dia NB

Providing and fixing G.I. pipes (JINDAL make) complete with G.I. fittings and clamps, including cutting and making good the wall, etc. (Internal Work-Exposed on wall)

15mm dia NB

20mm dia NB

Providing and fixing G.I. Pipes (JINDAL make) complete with G.I. fittings and clamps, including making good the walls, etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 15mm dia NB

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete. (New Work)

15mm dia NB

20mm dia NB

25mm dia NB

40mm dia NB

Making connection of G.I distribution branch with main of following sizes by providing and fixing tee including cutting cutting and threading the pipe etc. complete 25mm to 40 mm nominal bore

Providing and fixing C.P.brass bibcock of approved quality conforming to IS:8931(Omco make heavy duty ).15mm NB

Providing and fixing C.P brass stop cock (concealed) of standrad design and of approved make conforming to IS 8931(omco make).15mm NB.

Providing and fixing C.P brass extension nipple (size 15mm x 50mm) of approved make and quality as per direction of EIC(omco make).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangment and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (SINTEX Make). Circular tank

Providing and fixing white vitreous china laboratory sink including making all connections excluding the cost of fittings complete. Size: 600x450x200mm

Providing and fixing 1500 x 450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground with C.P. brass screws and washers complete. Rectangular type

Providing and laying 40 mm thick integral cement based water proofing treatment including preparation of surface as required for treatment of roofs ,balconies , terrace's up to Floor V Height from Plinth etc consisting of following operation 1) Removing the tar felt from the lime tracing 2) Chipping the top surface of lime terracing, removing the top skin including the dirt, mass, bitumen and/ or other foreign materials and thoroughly washing the roof. 3) Supplying the brick ballast (20mm down), free from dust and soaking the same in water. 4) Applying a coat of cement slurry(@2.69 or eqv.) compound (@ 1 kg/bag of cement).5) Laying 25mm thick (avg) cement sand mortar 1:4 mixed with water proofing compound in proper slope 6) Placing and pressing soaked brick ballast 0.006 cum/sqm) in the mortar when the mortar is still green 7) Allow the surface to set for 2 days with proper curing. 8 )Finishing top surface smooth with 15 mm thick cement slurry using 2.75 kg/sqm of cement admixed joint less cement mortar of mix 1:4 ( 1 cement: 4 Coarse sand) admixed with water proofing compound conforming to IS :2645 and approved by Engineer-in-Charge including laying glass fiber cloths of approved quality in top layer of plaster and finally finish the surface with trowel with neat cement slurry. 9) Making square marks with string on finished surface 300x300mm 10) Ponding the roof for seven days.

Providing and Fixing Heavy Duty Vitrified (Durastone) textured tiles size 300x300 mm in flooring, steps rise, skirting etc. Laid on 20mm thick cement mortar 1:4 including the pointing of joints with white cement and matching pigment etc. as per approved design with all respect complete.

Providing & fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to br specified by manufacture) of approved make in all colours, shades of size 300x600 mm, Joint free as approved by Engineer in change in skirting, risers of stes and dados over 12mm thick bed of Cement morter 1:3 (1cement: 3 Coarse sand) and jointing with gray cement slurry @ 3.3 kg per sqm incl. pointing with white cament mixed with pigment of matching shade complete.

9.00 mm thick square edge PVC Laminated Gypsum Tiles ( Armstrong, India Gypsum make) of size 595X595mm, made of Gypsum plaster board, manufactured from natural gypsum and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges seals with face side PVC film which goes around and wraps the edges and is bounded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Providing and fixing C.P. brass Bottle trap (omco make) including all fittings & fixtures for wash basin, Sink and urinal of approved quality and colour.Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263 gms.

Providing and fixing C.P.Spreader (omco make) including all fittings & fixtures for urinal of approved quality as directed by EIC.

Providing and fixing C.P. brass towel rail (Jaugar make) complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fitting arrangements of approved quality colour .600mm long towel rail with total length of 645mm, width 78mm, weighing not less than 190 gms.

Providing and fixing C.P.brass waste coupling (32mm to 40mm) for wash basin/ kit. Sink of approved quality and colour.Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 45 gms.

Providing & fixing white vitreous china flat back Urinal with fittings including unions and clamps ( all in C.P. brass) with waste pipe, waste fitting and other couplings in C.P. brass and cutting, making good walls and floors including Urinal cock(approved make) HINDWARE make, code-60002, size(HxWxP) -59cm x 39cmx 37.5cm, colour: Starwhite)

Providing and fixing Hindware garnet type code 10080 wash basin.

Providing and fixing long body bib cock 15mm NB (JAGUAR Make).

Providing & fixing glazing in aluminium door, window, ventilator, cupboard shutter anf partion etc. with pvc/ neopran gasket etc. complete as per 5.00 mm Thick Glass Pans all complete as per architectural drawings and the direction of EIC.

Providing & fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming toIS:12823 (Interior grade) in panelling fixed in aluminum doors windows shutters and partation frames with C.P brass/stainless screws etc complete. Prelaminated particle board with decorative lamination both side.

Distemper with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (two or more coats) over and including water thinable priming coat with cement primer.

Providing and fixing double wheel roller in aluminium windows in complete as directed by EIC.

Providing and fixing star lock of zinc alloy in aluiminium sliding window in complete as directed by EIC.

Providing and fixing bright finished 4" handle of stainless steel with screws in complete as directed by EIC.

Providing & fixing brass gate valve with CI wheel of approved quality (Zoloto/ L&T make with ISI marked).

Providing and apply on white cement based putty of average thickness of approved brand and manufacture , over the plastered wall surface to prepare the surface even and smooth up to floor V from ground level ,complete.

Providing & Fixing Chicken Mesh in the existing masonry/concrete surface with all respect complete.

Supply and applying of epoxy bonding agent (Brand- Dr Fixit / Sika) on the existing concrete surface.

Supply and applying of rust converter ( Brand- Dr Fixit/Sika) on the rusted surface of existing reinforcement.

Providing and fixing vista roller window blind in windows including all fittings in complete as directed by EIC.

GLORY ENGINEERING

Shiva and Co