REPAIR TO GATE, FENCING, DRAINS AND CERTAIN ALLIED RENEWALS IN

Amount

Dismantling fencing wiremesh, barbed wire any type all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in Concrete,brick work,masonry ,etc any section, including taking out embedded portion and making good disturbed ground.

Excavating in post holes (or similar holes) in soft/loose soil each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface.

M & L for plain cement concrete 1:3:6 type C-2 (Using 40mm graded aggregate as in foundation filling and mass concrete

Supply only Chain Link MS galvanised fencing , any size or type, all as specified and directed.

Fixing only chain link fencing including line wires, any mesh , size and type to any type of standards , rails , straining bolts, etc. including provision of binding wire, all as specified and directed.

S & F PVC coated chain link MS galvanised fencing including line wires, 4mm dia wire and 50x50mm pitch, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed .

S&F posts and struts in fencing including cutting tops to shapes as directed, drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe-290 Gde E-165)

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or quare nut, exc 5cm but n exc 10cm long dia of shank diameter of neck in 5 to 10 mm.

M&L Mild steel deformed bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified .

S & F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Ditto item no 11 but except barbed wire incl Restraininig & resecuring of existing barbed wire including making good staples etc

S&F for galvanised mild steel concertina coil fencing of 600mm dia, centre to centre barbs distance 48mm, Thickness of strip 0.50mm, length of barb 10.50mm, Dia of Spring wire 2.50mm, No of spiral (No of Turn ) 50/51 per coil Clips per spiral 5 Nos, Approximate weight 8.00 to 8.50 KG/ per coil ( Recommended coil stretch lenght 6 mtr ) and confirming to IS and as Manufacturers instuction and laying and secured with barbad wire/ Iron angle by using neccesary securing clips all a specified and directed by Engr-in Charge.

M&L applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed

Ditto item no 14 but on steel surfaces of width/ girth not exceeding 10 cm complete all as specified and directed

M&L for two coats of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of any description, not otherwise described over 10 cm width or girth incl preparation of surface complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and as directed.

M & L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

Demolition of brick work or stone masonry built in CM incl all quions all as specified

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, 1:6 type C1 1:3:6 (20 mm grared aggregate) complete all as specified.

M&L for plain cement concrete (PCC) 1:2:4 type B1 (20 mm grades stone aggregate) as in coping, benching and similar works including weathering slightly rounded on chamfered angle and throating all as directed

M&L for 50mm thick Plain Cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as sub base of floor .

M&L for plain cement concrete (PCC) type D-2,1:4:8 with using 40mm graded stone aggregate in foundation, filling & mass concrete.

M&L for Reinforced concrete pipes class NP2 of 600mm bore laid and jointed complete with collers incl demolition all as specified and directed

M & L extra for framing fair finished drain or channel upto 60cm in inner girth in cement concrete using extra cement including forms moulds mitred/ stopped ends etc.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.

M&L for cement plaster 15mm thick in cement mortar 1:4 on fair faces of stone/ brickwork finished even & smooth without using extra cement etc complete.

Supply only approved liquid water proofing compound, Make : conplast x 421 IC of M/s Foroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd.

Preparation of newly plastered surfaces and applying Two coats of cement base paint on walls including priming with alkali resistant primer paint complete all as specified and directed.

Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M & L for providing pre-cast cement concrete landing, cover slabs for manholes, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded crushed stone aggregate and setting in cement mortar 1:6 including necessary form work complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

G K CONSTRUCTIONS

Vivek Constructions