REPAIR/ MAINTENANCE OF INTERNAL ELECTRIFICATION AT D-IB ZONE UNDER AGE E/M-I OF GE(N) MAMUN

Amount

Taking down carefully unsv copper/aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sketch fitting etc removing materials to store for keeping in safe custody for taking creit and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.6mm thick CI/MS pressed steel sunken boxes of adequate size and 3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch complete all as specified and directed. Note: (i) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible. (ii) Rate of supplying and fixing CI/MS pressed sunken boxs and 3mm thick plastic laminated sheet cover deemed to be included in the quoted rates.

All as per Ser item No 2 above but for one 5/6 Amp socket outlet point on same board controlled by one switch.

All as per Ser item No 2 above but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Srl item No 2 above for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through exisitng concealed conduit and connected to common earth dolly with 1.6mm thick CI/MS pressed steel sunken boxes of adequate size and 3mm thick plastic laminated sheet cover fixed with brass screws for light/fan/bell point controlled by one switch complete all as specified and directed. Note: Rate of supplying and fixing CI/MS pressed sunken boxs and 3mm thick plastic laminated sheet cover deemed to be included in the quoted rates.

All as per Ser item No 6 above but for one light point controlled by two 2 way switch.

All as per Ser item No 6 above but for one 5/6 Amp socket outlet point on same board controlled by one switch.

All as per Ser item No 6 above but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Srl item No 6 above but for one 15/16 Amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.6mm thick CI/MS modular sunken box of required size with support frame (inner/outer) for mounting modular switch , sockets etc including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch complete all as specified and directed. Note:-(i) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible. (ii) Rate of supplying and fixing modular CI/MS pressed sunken box with support frame deemed to be included in the quoted rates.

All as per Ser item No 11 above but for one 5/6 Amp socket outlet point on same board controlled by one switch.

All as per Ser item No 11 above but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Srl item No 11 above but for one 15/16 Amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through exisitng concealed conduit and connected to common earth dolly with 1.6mm thick CI/MS modular powder coated sunken box of required size with support frame (inner/outer) for mounting modular switch , sockets for one light/fan/bell point controlled by one switch complete all as specified and directed. Note:Rate of supplying and fixing CI/MS pressed sunken boxs with support frame deemed to be included in the quoted rates.

All as per Ser item No 15 above but for one light point controlled by two 2 way switch.

All as per Ser item No 15 above but for one 5/6 Amp socket outlet point on same board controlled by one switch.

All as per Ser item No 15 above but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Srl item No 15 above but for one 15/16 Amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

Repair, maint of VTPN/SPN DB any way by removing burnt MCBs, links, pieces of electrical wire and fixing suitable size of earth/neutral links, PVC insulated copper wire pieces of size from 1.5 Sqmm to 10 Sqmm incl drawing wires through PVC flexible conduit of suitable size and making electric connections with MCBs using copper/brass thimbles complete all as specified and directed. Note :MCBs will be measured and paid seperately under respective items.

Supply and fix of cable FRLS PVC insulated and unsheathed multistranded copper conductor 1100 Volts grade single core of size 1.5Sqmm complete all as specified and directed.

All as per item No 21 above but size 2.5 Sqmm.

S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type, 240 volts complete all as specified and as directed.

S&F switch 15/16 Amps, flush type, 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 pin, 6/16 Amp flush type, 240 volts complete all as specified and as directed.

S&F switch piano flush button single pole two way 5/6 Amp 240 volts complete all as specified and as directed.

S&F Bell push, flush type, 5/6 Amp AC 230 Volt etc complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin, 6/16 Amps, flush type with indicator, 240 volts complete all as specified and as directed.

S&F switch socket combination 2 in 1, 3 pin, 5/6 Amps, flush type, 240 volts complete all as specified and as directed.

S&F stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type.

S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals.

S&F modular switch one way 6 Amp one module, front operated complete all as specified and directed.

S&F modular socket 6 Amp, 5 Pin with shutter, 2 module complete all as specified and directed.

S&F modular switch piano type flush button single pole 16 Amp one module, front operated complete all as specified and directed.

S&F modular socket 6 Amp/16 Amp, 6 Pin multipurpose with shutters , 2 module complete all as specified and directed.

S&F modular switch two way 6 Amp one module, front operated complete all as specified and directed.

S&F Modular Bell push switch, 6 Amp, AC 230 Volt, 1 Module complete all as specified and directed.

S&F Bell Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed.

S&F fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 100W- 2 module including necessary connections complete all as specified and directed.

S&F Lamp holder jumbo modular type, PVC/Polycarbonate type with back plate complete all as specified and directed.

S&F PVC round junction box cover not less than 8cm dia, 0.3cm thick incl fixing with suitable size of machine screw complete all as specified and directed.

Taking down carefully unsv copper/aluminium sub main wiring of any size including old broken steel/PVC conduit and removing materials to store for keeping in safe custody for taking credit complete all as specified.

M & L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 20mm dia 1.5mm thick with all accessories incl cutting chases on wall and making good to the disturbed surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed.

All as per Ser Item No 44 above but of size 2x6 Sqmm drawn in existing concealed conduit.

S & F in replacement 20W surface / wall mounted box type batten LED fitting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size, length flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.

All as per ser item No 46 habove but for 10 W LED batten fitting 2 feet long.

S & F surface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protection complete with all accessories internally prewired and including connecting up with suitable size, length flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.

Supply and fixing 36 watt LED 2'x2' slim panel, 220 V AC recessed type having white powder coated CRCA housing and high quality diffuser for glare free light with driver and mounting clips suitable for POP/gypsum ceiling and connecting up suitable size, length flexible copper conductor cable from ceiling rose to connector of light fitting including making good the disturbed POP surface complete all as specified and directed.

All as per ser item no 49 above but for size 36Watt LED 1'x4' panel.

S & F surface mounted 2X2 backlit 36 watt LED Panel having white powder coated CRCA housing, high quality diffuser for glare free light with integrated driver and mounting clips suitable for surface/roof mounting and connecting up suitable size, length flexible copper conductor cable from ceiling rose to connector of light fitting including making good the disturbed POP surface complete all as specified and directed.

S & F round/square shaped LED 12Watt recessed type panel, 220 volts AC with Polycarbobnate housing and high efficiency diffuse for glare free light complete with drivers, mounting clips suitable for roof ceiling including connecting up suitable size, length flexible copper conductor cable complete all as specified and directed.

All as per Ser item No 52 above but for 18Watt.

S & F LED 18 watt surface mounted round/square shaped rimless downlight panel having polycarbonate housing, high quality PC diffuser for glare free light with inbuilt driver and mounting arrangement suitable for surface/roof mounting including connecting up suitable size, length flexible copper conductor cable complte all as specified and directed.

S & F recess mounted cob swivel 3 Watt LED, 3000K CCT downlighter with pressure die-cast aluminium heat sink & clear PC as a cover in white powder coated finish with Independent electronic LED driver including connecting up suitable size, length flexible copper conductor cable complte all as specified and directed.

S & F fancy type wall/surface mounted decorative light fitting with brushed nickle finish fixture and opal glass decorative diffuser, B-22 type lamp holder and wall mounting arrangement including 9W LED lamp and connecting up with suitable size, length flexible copper conductor complete all as specified and directed.

S & F decorative wall mounting LED bed side light 2 watt 3000K fitting having flexible neck and mounting clips incl connecting up with suitable size, length flexible copper conductor cable complete all as specified and directed.

S & F sheet metal enclosures double door VTPN MCB DB 4 way 415 V AC, 50 Hz with IP 43 and IK 09 protection having fully insulated copper busbar of suitable rating, insulated neutral bar, earth bar and cable ties for cable management and polyuthrene gasket and flush mounting into the wall incl taking out old unsv DB and making good the disturbed surface and matching with the existing specification complete all as specified and diercted.

S & F SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed.

All as per Srl item No 59 above but for 4 way DB.

S&F in replacement MCB SP 240V, 50Hz of rating 6 to 32 Amp, 'B' curve using suitable size copper thimbles complete all as specified and directed.

All as per Ser item No 61 above but for size 40-63 Amps MCB SP.

All as per Ser item No 61 above but for size 32 Amps MCB SPN.

All as per Ser item No 61 above but for size 40-63 Amps MCB SPN.

S & F of MCCB 100Amps 3Pole 415Volts, 16kA breaking cap with fixed thermal and fixed magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed.

All as per item No 65 above but of size 63Amps.

M&L for CI/MS powder coated sunken box (16 Guage) of size upto 3 Module incl cutting chases on wall , flush mounting sunken box and making good the disturbed surface complete all as specified and directed.

All as per Srl item No 67 above but for size 4/6 module.

All as per Srl item No 67 above but for size 8 module.

All as per Srl item No 67 above but for size 12 module.

S&F modular cover plate with support frame of size upto 3 Module complete all as specified and directed.

All as per Srl item No 71 above but for size 4/6 module.

All as per Srl item No 71 above but for size 8 module.

All as per Srl item No 71 above but for size 12 module.

Supply and fixing plastic laminated sheet of size 9"x11" having thickness not less than 3mm thick with brass screws and washers for mounting switch/sockets/fan regulator complete all as specified and directed.

All as per Srl item No 75 above but of size 8"x5".

All as per Srl item No 75 above but of size 5"x5".

S&F LED wall security lights of 25 Watt having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W, IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl mounting on GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 46,947.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

M/S HIMANSHU BUILDERS

M/S SHRI RAM BUILDERS

VIMAL TRADERS AND SUPPLIERS

KULBHUSHAN AGGARWAL

M/S BHATIA CONSTRUCTION

M/S CHAIN SINGH CONTRACTOR

SAINI AND SAINI BUILDERS