Construction of 300 Persons Capacity Barracks for Firemen, Model Fire Station, Kitchen Cum Dining, Parade Ground and with basic amenities for the creation of state training Academy for Tamil Nadu Fire and Rescue Services at Kalavakkam in Chengalpet

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 m

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 m

7.2)Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

15.1) Cuddappa slab 20 mm tk.for C/B slab. a. Ground floor

b. In First floor

c. In Second floor

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3) Supplying and fixing of Magnetic door catches

30) Ellispattern

31) Weathering course

37.1) White washing 3 coats (slaked)

39) M.S Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

46) Supplying and fixing of 20 mm dia Alu. Hanger Rod

47) Supplying and fixing of Alu Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

49) Providing and fixing iron chromium plated 8 gauge Picture hooks

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

51) Supply and fixing of 700 liters capacity HDPE water tank

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3) C.I. Steps ( 5 kg)

55.2) Supplying and fixing of approved brand Porcelain Flat Back urinal superior variety

Electrical arrangements 72) Box type Fibre Fan hook

74) Charges for fixing of "Fan"

76) 8 SWG wire

78) Earthing Station IS3043 (Type I)

86) Providing Anti-termite treatment to soil

112) Supplying & fixing of exhaust fan 300 mm dia

Annexure 1.5) Earth work excavation for Open foundation (excluding refilling) c. 3 to 4 m

2.1.1) Filling C.S. sand

2.12) Supplying and filling with gravel

2.15) Supplying and filling stone dust

2.17) Supplying and filling with red earth

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works

6.2.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

8.2.3.1) Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement

b. In Ground / Stilt Floor

c. In First Floor

d. In Second Floor

e. In Third floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor/Stilt floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor/stilt floor

c. In First Floor

d. In Second Floor

11.2.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

14.3.II)Precast cupboard slab 40 mm tkusing standardised concrete mix M30 a. In Foundation & basement

16.5) Precast Jally ventilator 50mm tk.using standardised concrete mix M30 without vibrating charges d. In Third floor

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

21.6.2.2) R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M30grade (with out vibrating charges) a. 900 x 2100 mm

21.6.6) Supplying and fixing of single leaf Solid Core Flush door Shutters with teakply on both side with teakwood lipping alround 35mm thick a. 1000 x 2400 mm

21.7.3) Supplying and fixing of single leaf Solid Core Flush door Shutters with teakply on both side with teakwood lipping alround 35mm thick a) 1000x2100mm (single leaf)

22.1.2) TW panelled single door shutter with brass fittings. a. 900X2100mm with Brass fittings ( Single leaf)

22.1.8) TW panelled single door shutter with brass fittings. a. 1000X2100mm with Brass fittings ( Single leaf)

22.1.9) TW panelled single door shutter with brass fittings. e. 1000X2400mm with Brass fittings ( Single leaf)

22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

23.1.8) TW styles & rails with 9mm thick BWR single leaf shutters with brass screws d) 1200 x 2100 mm

26.1) Flooring in C.C.1:5:10

28.1) Floor plastering in C.M. 1:4, 20 mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound

33.2.1) Plastering with CM 1:5 12mm thick finishd with neat cement

34.2.1) ) Plastering in C.M. 1:4, 12 mm tk.

35.2.1) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk.

36.1) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

43.2.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(BINDING WIRE insulated with PVC)

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M30)

b) Augering 30cm dia

44.5.3.1) Providing Rain Water Harvesting well ring circular shape of 90cm dia, 60cm depth,50mm thick using M30 grade concrete

44.6.1) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe UPVC Specials

45.2) Stucco plastering 12 mm tk.

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board

50.6.1) Supplying and fixng of Fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6

52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials a.32mm dia

b. 25 mm dia

52.4.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials (fully consealed in walls) c. 20mm dia PVC water supply ASTM pipe

52.9) Supply and fixing of 40mm dia MS clamp set

53.4) Supplying & fixing of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1) Supplying and fixing of of 15mm dia half turn CP long body tap

54.2.1) Supplying and fixing of of 15mm dia half turn CP short body tap

56.3.1) Supplying and fixing of of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.1) Supplying & fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.2) Supplying and fixing of of E.W.C.(White) 500 mm with "P" or "S" TRAP with double flapped seat & seat cover

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. ( PVC Box , Fire Retarded Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box )

66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box )

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )

69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with fitting

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletcronic Dimmer

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.6) 3 Nos.of 200 Amps - Fuse Unit (500V)

82.3.1) Supply and fixing of 25W LED street light etc.,

87.1) Supplying and delivery of Three phase ELCB/RCCB

88.3) Providing Rajasthan kota stone flooring, C.M 1:3, 20mm tk

93.1) Plastering with CM 1:3, 12mm with WPC

96.7) Supply and Laying Rubber Moulded Hyraulic Pressed Paver Block 83 mm thick including labour charges for laying etc

98.5.1) TW panelled double leaves door shutter with brass fittings. a.1800 x 2100mm

b. 2000X2100mm.(Double leaves) with Brass fittings

98.5.2) TW panelled double leaves door shutter with brass fittings. a.1800 x 2400mm

98.5.3) TW panelled double leaves door shutter with brass fittings. a.) 2000 x 2800mm

108.6.2) Run off 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

108.7.1) Run of 4 Wires of 10 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

125.3) Supplying and delivery of "Godraj Nav-tal Ultra XL+/equivelant" lock of approved quality

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 core 120 Sq.mm PVC armoured LTUG cable (Below G.L)

b) 3.5 C x 50 sq.mm. PVC LTUG aluminium armoured cable

155.1) Supply and erection of 200 Amps capacity floor mounting type metering cubical type panel board

161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 C x 120sq.mm. PVC LTUG aluminium armoured cable

b) 3.5 C x 50sq.mm. PVC LTUG aluminium armoured cable

161.4) Supply and providing cable end termination of following PVC LTUG Aluminium armoured cable a) 3.5 core 120 Sq.mm PVC armoured LTUG cable End terminiation

b) 3.5 C x 50 sqmm PVC LTUG aluminium armoured cable

162.2.1) Supplying and clamping of PVC armoured LTUG cable(Above GL) a) 3.5 C x 50 sq.mm. PVC LTUG aluminium armoured cable

171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS8034 without Panel Board of capacity 20 LPM X 125m (Single phase)

171.2.9) Supply and Delivery of Three phase Openwell Submersible motor Pumpset 50LPM X 100m

175.3.1) Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution boardwith earth connection

179) Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 m class 'B' GI pipe of dia not less than 40mm

179.1) Supply and run of 25mm x 3mm tinned coated copper flat on surface or in recess for connections as required with necessary MS clamps /support on wall /ground for earth connection

179.2) Supply and run of 25mm x 6mm tincoated copper flat on surface or in recess for connections as required for alternator neutral

180) Supply and Run of 2 of No.8 SWG copper wire for earth connection

202.1) Supplying and delivery of GI pipes (Medium) as per IS 1239/part I/2004 for encasing to the road crossings. a. 80mm dia GI (medium) class pipe

207.3.1) Painting the false ceilling / walls with two coats of 1st class ready mixed plastic emulsion paint

207.4.1) Painting the new walls with two coats of approved best exterior Emulsion paint in addition to one coat of approved primer paint over cement plastered wall surfaces for outer walls

213.1) Supplying and fixing of of SFRC manhole cover 600x600mm

238) Anticorrosive treatment for steel grills

238.1) Anticorrosive treatment for window grills

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder a) 9watts LED bulb

b) 12 watts LED bulb

344.2) Supplying and fixing of following size Bevelled edge mirror a) 500 x 400 x 5.5mm

b) 600x450 x 5.5mm

359.3.1) Concrete designer tiles flooring

362.2.2) Suppling and laying of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm Flooring in C.M 1:3

366.3.1) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails from finished floor level

367.1) Providing wooden Melamine polish for new wood work

379.5.2)Providing Jet Black Granite slab (superfine polished with machine cut edges) of size 4'x 2' 18 to 20mm thick for kitchen platform slabs C.M 1:3, 20mm tk a. Ground floor

379.7.1.1) Supplying and fixing of PVC trims (beading) of approved quality

379.8.3) Supply and fixing of Granite tiles 10mm thk Ruby red for flooring in CM 1:3, 20mm thk

382) Supplying & fixing of Cuddapah sink 600 x 600 x 200mm

383.2) Providing double nosing to the edges of Granite slab

503.1) Supply and laying of required dia of Nylon rope

608.1) Supplying, laying, fixing and jointing the following UPVC pipes of schedule 40 of below Ground level a) 40mm UPVC schedule 40 with required UPVC specials

609.6) Supply and delivery of 150mm OD of PVC casing pipes (6kg/cm2) as per IS 12818 /2010

609.6.1) Supply and delivery of 150mm OD ribbed screen pipes (6kg/cm2) as per IS 12818 /2010

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) a) l50mm dia casing pipes assembly

615.2.1) Labour charges for the erection of submersible pumpset in borewell/openwell a)Up to 5 Hp

615.3.1) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpset a)Up to 3 Hp

615.3.2) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpset a)Up to 1.5 Hp

616.4.1)Supplying, laying and jointing the following dia HDPE pipes for sub-mersible pump in bore well Class-5 (1 MPa or 10 kg./cm2 Pressure) a) 40mm dia

619) Supplying, and delivery of following dia of G.I. pipes ‘B’ class & specials a..50mm dia GI pipe

b. 50mm dia G.I. Union

c.80mm GI Bend

d.50mm dia GI Bend

e.80mm GI Coupling

f.50mm dia GI Coupling

619.2.1) Supplying and delivery of following materials of best approved quality a. 50mm Gate valve

619.9) Supplying and fixing of following dia GM Non return Valve a.50mm dia GM Non-Return valve

707.2.1) Supply and laying of 3 core 4 sq.mm flat type copper cable

799.1) Drilling of Borewell anywhere inculding transportation from one place to another place in alluvial soil or sedimentary a) Drilling of borewell in upto 60m

799.1.2) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s a)up to 60m depth ending from ground level.

799.2) Drilling of 150mm dia vertical bores in hardrock formation to any required depth using " DTH Rig" (below GL) a) up to 150m below G.L

799.3) Charges for developing the borewell forthe entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

799.3.1) Supplying and fixing of 160mm dia PVC end cap for borewell

827) Supply and laying of Hard core layer 300mm

832.5.2)Supplying and fixing in position of UPVC window of casement type( open) for all sizes

832.5.3)Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

911.3.1) Supplying nd laying of 1000 x 1000 x 300mm size ms 16 SWG powder coated cable terminal box with two compartment with necessary bus bar connected with TNEB etc.,

929.2) Providing safety equipments: CO2 fire extinguisher : 1 No.; 9 ltrs capacity fire buckets: 3 Nos., & rubber mat : 1 No.

931.8) Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity

940.1) Supply and installation SS Bar screen, type of screen-Medium, Size: 1.0 m x 1.0 M x 5 MM Thick

940.2) Supply and Installation of Fine Membrane diffuser, Size: 90MM dia x 1.0 M Long with retrievable system , MOC: EPDM with inter connecting air Cpvc pipe lines and fitting

940.3) Supply and Installation of Coarse Membrane diffuser, Size: 90 MM dia x 1.0 M Long with retrievable system , MOC: EPDM with inter connecting air Cpvc pipe lines and fitting

940.4) Supply & Installation of STP - Collection water transfer Submersible Cutter pump with Motor, Type-Cutter, Model JDSK, discharge size : 40NB, Head: 10 Meter, Flow : 50 Kl/hr, Electrical panel: 1 HP / 3 Phase

940.5) Supply and Fixing of Air blower, Capacity-200 M3/hr, Pressure-0.4 Kg/cm2

940.6) Supply & Installation of Blower Motor, Electrical - RPM 1500, 5.5 HP, 3 Phase with Control panel

940.7) Supply and Installation Secondary Clarifier Mechanism, Gear box with Motor, Electrical -1.0 HP, 3 phase,

940.8) Supply and Fixing of Pressure Sand Filter (PSF), Size: 800 MM dia x 2000 MM Height on straight (HOS) x 6 MM Thick, 50 NB MSEP frontal Pipe Lines, with different size Filter Medias – 1200 Kg

940.9) Supply and Fixing of Activated carbon Filter (ACF), Size: 800 MM dia x 2000 MM Height on straight (HOS) x 6 MM Thick, 50 NB MSEP frontal Pipe Lines, Filter Medias – 250 Kgs & Activated Carbon IV 900 –300 Kg

950) Supply & Installation of Chlorine dosing pump, Capacity- 6 LPH @ 4 Kg/cm2,

950.1) Supply & Installation of STP - Sludge recirculation Pump with Motor, Type-Monobloc non clog,

950.2) Supply & Installation of STP – Treated water transfer pump with Motor, Type-Monobloc non clog,

950.3) Supply and Installation of MSEP Interconnecting 40 NB pipes works, including NRV, Valves for all Service line pipes and fittings

950.4) Supply and Installation of UPVC Interconnecting 40 NB pipe works including NRV, valves for all drain line pipes and fittings

950.5) Supply of MBBR Media for aeration tank

950.6) Supplying and delivery of electrical control panel board for the STP all pumps - 11 Feeder

950.7) Supplying and Installation of electrical cables and tray for the STP with all pumps

950.8) Labour and Plumbing work for all electro Mechanical equipments installation & commissioning work

950.9) Supply of Water Purification with Drinking water RO Plant of capacity 500LPH with UV System

951) SAFETY ACCESSORIES a) 2m x 1m Rubber Mat suitable for 11KV installation confirming to IS

b) Shock Treatment Chart fixed in glass frame

c) 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

d) Fire Extinguisher Co2, 4.5Kg. Confirming to TAC Norms

959.2) Erection, Testing and commissioning of 125KVA Diesel generator set. With AMF Panel

959.3) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)

959.4) Supply and installation of M.S. cable adopter box

959.5) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia

959.6) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia complete with MS wall / ceiling support, etc.

959.7) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool

959.8) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe

959.9) Preparation of necessary drawings for approval CEIG

960.4.1) Numbering & lettering arrangements Supply and fixing of Aluminium TNPHC Emblem of 18" height

960.4.3) Supply and Fixing of 12" Height Aluminium letters

960.4.4) Supply and fixing of 6" Height Aluminium letters

960.4.5) Supply and fixing of 20"x5" size plastic foam name plate

960.4.6) Supply and fixing of 24"x8" plastic foam name plate with vinyl cutting letter RWH Board

chendur construction company (BID ID -1344536)

JOHNSUN ENGINEERING CONTRACTORS (BID ID -1332603)

Bidder Name

chendur construction company

N SAKTHIVEL AND CO

JOHNSUN ENGINEERING CONTRACTORS