SPECIAL REPAIR TO BUILDING NO. P-13 AT 2 AFSB MYSORE

Amount

Material & Labour for 50mm thick river sand/ M sand layer for interlocking paver block watering and ramming all as specified and as directed.

Material & Labour for Hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as dierected.

Making good under cills or over arches, lintels and bressummers, including all pinning when necessary in cement mortar 1:4, complete all as specified and directed.

Material & Labour for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partitions and like set in cement mortar (1:4) including pointing in white cement & marble dust (1:2) with admixture of pigment to match with shade of granite incl rounding edges, gas pipe inserting hole, complete all as specified and directed.

Taking down Chowkats or frames not exceedig 1.5 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Material & Labour for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with M.S Square tubes, supporting & fixing in opening, complete all as specified and directed.

Material & Labour for factory made solid PVC Moulded door shutter ,30 mm thick (style)consisting of frame made out of MS tubes for top & Bottom rail , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : panelling of both side prelam PVC sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable PVC seat beading, and jointed together with solvent cement, supplying and fixing to the frame at site, complete all as specified and directed.

Taking down Shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed.

Material & Labour for second class soft wood 30 mm in thickness wire gauzed & skeleton shutters, open rebated & prepared to receive wire gauze, etc. edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a), fixedto chowkats.

Taking down steel window and ventilator (Without taking off shutter from the frame) of area not exceeding 1.50 Sqm each, complete all as specified and directed.

Material & Labour for aluminium anodised powder coated windows with 3 channels for catering mosquito proofing & 4mm thick glass with necessary accessories like jointing cleats, rubber packing,beading and screws etc complete, including powder coated aluminium grill of DG-103 as per TD drg, complete all as specified and directed.

Material & Labour for aluminium anodised powder coated louver ventilators & 4mm thick tinted glass with openable hinges and necessary accessories like jointing cleats, rubber packing,beading and screws etc complete, as per TD drg, complete all as specified and directed.

Supply & Fix in repair Harrison rails, anodised aluminium alloy plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

Supply & Fix Galvanised mild steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Supply & Fix Aluminium, anodised, barrel tower bolts 150 mm long of extruded section, complete all as specified and directed.

Supply & Fix Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

Supply & Fix Butt hinges 100mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

Supply & Fix Aluminium handles 100mm size, cast type, anodised, complete all as specified and directed.

Supply & Fix 150 mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring, complete all as specified and directed.

Supply & Fix Butt hinges, medium weight cold rolled mild steel 100 mm in size, complete all as specified and directed.

Supply & Fix Aluminium alloy, anodised, sliding door bolt 150 mm in length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

Supply & Fix in Repairs Tubular towel rail 20 mm dia, D type 60 cm long aluminium anodised between flanges, complete all as specified and directed.

Supply & Fix Aluminium anodised, barrel tower bolts of extruded section, 100 mm in length, complete all as specified and directed.

Supply & Fix Aluminium handles, cast type 75 mm in size, complete all as specified and directed.

Material & Labour for framed work such as grills, gratings, gates etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar works including fixing to channel section using MS bearing hinges to frame confirming to Fe-290 grade-E-165 applying one coat of redoxide primer over two coats of synthetic enamel paint for complete iron work, complete all as specified and directed.

Material & Labour for PVC edge banding tap 0.45mm thick, 22mm wide matching shade to lamination fixed with PVC fix adhesive ply board veneered, complete all as specified and didrected Make : Richies,Maruti, Durawell

Supply & Fix of 2 way powder coated aluminium track for sliding/moving of shutters of cupboards fixing with nails, complete all as specified and directed.

Supply & Fix stainless steel handles 100mm size for kitchen cabinet shutters all as specified and as directed. Make Crown, Adarsh, Jyothi, Argent Industries/ Classic

Supply & Fix of suitable locking facility with 3 duplicate keys for cupboards to both sides of openings, complete all as specified and directed.

Material & Labour for 12mm thick (No of ply 7) Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws as in cabinets, shelves, door shutters kitchen cabinet and cup boards etc, complete all as specified and directed. Make : Mysore Chip Board, Mysore, Century plywood, Green ply.

Material & Labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, plastered

Material & Labour for Non skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer of mortar 1:6, complete all as specified and directed.

Material & Labour for Non skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Material & Labour for Glazed ceramic coloured tiles in verticle surfaces 350 x 250 x 7 / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in cement mortar 1:3, complete all as specified and directed.

Material & Labour for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate), complete all as specified and directed.

Material & Labour for machine pressed precast concrete inter locking paver block of any shape and size confirming to IS 15658-2006 of thickness 80mm, M-35 grade etc, complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Material & Labour for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surfaceof walls, surface finished fair and even without using extra cement, all as specified and directed.

Material & Labour for preparing new plastered surfaces of wall and applying two coat of distemper oil emulsion over alkali resistant priming paint, complete all as specified and directed.

Material & Labour for 12 mm thick tiles for insulation and accoustic purposes, 60x60 cm in size, staples on aluminium snap grid in ceiling including anodised aluminium snap grid frame work and hangers 6 mm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60mm long including one coat of distemper over a coat of primer / aluminium foil covered, complete all as specified & directed.

Material & Labour for Preparation of old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applaying one coat of Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified & directed.

Material & Labour for complete removal of existing treatment of wall and applying two coat of distemper oil emulsion over 1 mm thcik wall care putty with smooth finishing, complete all as specified and directed.

Material & Labour for complete removal of existing treatment of ceiling and applying two coat of white wash, complete all as specified and directed.

Material & Labour for preparation of new woooden surface of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paintover one coat of pink primer, complete all as specified & directed.

Material & Labour for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth, and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material & Labour for preparation of old painted steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth, and applying one coat of synthetic enamel paint, complete all as specified and directed.

Supply & Fix in Repairs Vitreous china squatting pan, orissa pattern, size 580 x 440 mm white with integral foot rest complete including provision of cement concrete 1:3:6 type C-1, complete all as specified and directed.

Supply & Fix in Repairs vitreous china, pedestal pattern complete with seat cover including provision of cement concrete with out any damage of Tiles, complete all as specified and directed.

Supply & Fix in Repairs PVC valveless, syphonic action type, flushing cistern 10 liters capacity, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

Supply & Fix in Repairs vitreous china bowl urinal flat back, white complete of size 465 x 355 x 265 mm with grating and Union for discharge pipe. Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Note - Pipe to flushing cistern, trap and waste pipe shall be measured & paid separately)

Supply & Fix in Repairs Vitreous china wash basin, white, flat back, size 630 x 450 mm including brackets. & Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. (Note : Brackets are included in quoted rates)

Supply & Fix in Repairs Brass chromium plated shower rose 125 mm size. Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

Supply & Fix in Repairs PTMT 32mm dia bottle trap for wash basin with inlet and out let screwed for pipes or connecting incluiding necessary packing, union and cap and fixed, complete all as specified and directed.

Supply & Fix in Repairs 32mm dia PVC flush pipe on one side fixed to low level flushing cistern and other side to squatt pattern closet cost including making good to floor, complete all as specified and directed.

Supply & Fix in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

Supply & Fix in Repairs Bib taps 15mm in size, cast copper alloy chromium plated with crutch or butterfly handle, screwed for iron for fixing, complete all as specified and directed.

Supply & Fix in Repairs pillar tap 15mm dia ,cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and flynuts, screwed for iron pipe and fixing, complete all as specified and directed.

Supply & Fix in Repairs stop valve/angle cock fancy type chromium plated 15mm dia,cast copper alloy screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipes or PVC connection, complete all as specified and directed.

Supply & Fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in connecting pipe in position, complete in all respect as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store boreof pipe in 20 mm, complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store boreof pipe in 25 mm, complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (walls, ceiling, floors, etc.) bore of pipe in 20mm, complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (walls, ceiling, floors, etc.) bore of pipe in 25mm, complete all as specified and directed.

Material & Labour for ' Medium grade' galvanised Tubes 20 mm dia, with all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Material & Labour for ' Medium grade' galvanised Tubes 25 mm dia, with all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Supply & Fix in repairs for gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , bore of pipe 20mm, complete all as specified and directed.

Disconnecting existing tanks of capacity of tank 1000Lts, setting aside (or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and directed.

Supply & Fix in Repairs PVC Rotational moulded polyethylene water storage tanks 1000 Litres (cylindrical vertical with closed top) hoisted and fixed in positionincluding dismantling water tanks and removing to store, complete all as specified and directed.

Supply & Fix PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor or trenches 110 mm bore pipe, complete all as specified and directed.

Supply & Fix PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110 mm bore pipe, complete all as specified and directed.

Supply & Fix PVC (SWR) bends any radius 110 mm bore pipe, complete all as specified and directed.

Supply & Fix 110 mm PVC (SWR) vent cowl, complete all as specified and directed.

Supply & Fix for PVC (SWR) junction single, (Single T) equal or unequal 110/110 mm bore, complete all as specified and directed.

Supply & Fix for PVC (SWR) couplers 110/110 mm bore, complete all as specified and directed.

Supply & Fix of Grating doom 100mm dia of PTMT (Minimum weight 25gms) with white cement complete all as specified and directed.

S&F in Repairs PVC connection 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets cover fillets of any thickness, complete all as specified and directed.

Dismantling of timber scantling, fillets, rails post, rafters, purlins etc under 40 sqcm in section, complete all as specified and directed.

Dismantling of CI pipe joints in cement and taking out in trenches or in floor or wall, 100 mm dia, complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed.

Taking down carefully aluminium point wiring light, fan, sockets or power complete from surface wiring or from concealed wiring without disturbing concealed conduit including fittings such as ceiling rose, light fittings of any type, fan regulators etc and making good to the disturbed surfaces wall ceiling floors to match existing surfaces, complete all as specified and directed.

Material & Labour for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface/ Concealed conduit/Casing caping , clip, with suitable Suitable for modular switches including modular metal flush box and modular whit cover cover including 1.50 sqmm green copper conductor as continuous earth wire with all accessories including lugs required, for One light point or fan point contrlled by one switch, complete all as specified and directed

Material & Labour for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface/ Concealed conduit/Casing caping , clip, with suitable Suitable for modular switches including modular metal flush box and modular whit cover cover including 1.50 sqmm green copper conductor as continuous earth wire with all accessories including lugs required, for one socket outlet 5Amp on indepenant board, complete all as specified and directed

Material & Labour for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface/ Concealed conduit/Casing caping , clip, with suitable Suitable for modular switches including modular metal flush box and modular whit cover cover including 1.50 sqmm green copper conductor as continuous earth wire with all accessories including lugs required, for one socket outlet 5Amp on the same board with other switches, complete all as specified and directed

Material & Labour for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 4 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface/ Concealed conduit/Casing caping , clip, with suitable Suitable for modular switches including modular metal flush box and modular whit cover cover including 4 sqmm green copper conductor as continuous earth wire with all accessories including lugs required, for socket outlet 3 pin 15 Amps on independent board, complete all as specified and directed

Material & Labour for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 2.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface/ Concealed conduit/Casing caping , clip, with suitable Suitable for modular switches including modular metal flush box and modular whit cover cover including 2.50 sqmm green copper conductor as continuous earth wire with all accessories including lugs required, for one socket outlet 15Amp independent , complete all as specified and directed

Supply & Fix modular switch 1way 6A, 1 module, complete all as specified and directed

Supply & Fix Fmodular switch 1way 16A, 1 module, complete all as specified and directed

Supply & Fix modular socke 6A,t 2/3 pin combined, 2 module 16A, 2 module, complete all as specified and directed

Supply & Fix modular socke 6/16A,t 2/3 pin combined, 2 module 16A, 2 module, complete all as specified and directed

Supply and fix in repair ceiling rose 3 terminals, complete all as specified and directed

Supply and fix in surface mounted LED batten with anadised aluminium housing with poly carbonate diffuser and integrated electronic driver complete with all accessories lamp type 24 W 4 feet length and internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed

Supply and fixing in replacement LED light fitting with diffuser 2 feet, 10 watt 220 V AC with integrated electronic driver including connecting up with three core flexible copper conductor cable of suitable size complete, complete all as specified and directed

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high performance LEDs and diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling all as per Model No - VENUSNEO2XPLR36WLED857G2 of Make - Havells (or equivalent in other makes) including connecting up with driver three core flexible copper conductor of suitable size, complete all as specified and directed

Supply and fix in replacement energy savint LED security light lumiaires with pressure die cast alluminium IP 65 ,having LED light 30 Watt all as per Model No - ENDURASUNDOWNSL30WLED757PASYBOPC of Make - Havells (or equivalent in other makes) including all accessories such as GI bracket made of GI pipe light grade of suitable size and fixing arrangement, complete all as specified and directed

Supply and fix in replacement LED Post top lantern 15 watt, spun aluminium landscape luminaire with high power LEDs as light source, all as per Model part No RUBYMINPT15WLED830PSYMTOPCC of Make - Havells (or equivalent in other makes), complete all as specified and directed

Supply and fix in replacement of LED Bulb 9 Watts complete all as specified and directed.

Supply and fix in repair modular fan regulator AC 230V, 120W , 2 module, complete all as specified and directed

Supply and Fix Lamp holder PVC / Policarbonate, complete all as specified and directed

Material & Labour for drawing through pipe/pole Three core 2.5 Sqmm flexible cable, 1100 V PVC insulated & Sheathed with bare annealed copper conductor as per IS 694-2010, complete all as specified and directed

Supply and Fix Rigid non metallic PVC conduit 25 mm dia inclusive of all tee, bends, elbows, complete all as specified and directed

Supply & Fix in repair MCB distribution board SPN 12 way double door 240V powder coated with 200 Amps rated bus bar neutral link etc, complete all as specified and directed

Supply & Fix in repair MCB distribution board SPN 2 way single door 240V powder coated with 200 Amps rated bus bar neutral link etc, complete all as specified and directed

Supply & Fix in repair Sheet metel enclosure with socket plug top and MCB , single pole and neutral with two pin and earth plug and socket complete with one single pole MCB 32 Amp, complete all as specified and directed

Supply and fixing in repair Exhaust fan steel body AC single phase, 230 V of size 300 MM sweep with blade and frame and louvers, complete all as specified and directed

Material & Labour in replacement submain wiring with PVC insulated, single core, multi stranded, 1100 volts grade unsheathed copper conductor cable in and including PVC Conduit/Casing capping with accessories fixed on wall /ceiling with GI screws complete with 3 runs of 4 Sqmm and one run of 4 Sqmm for earth continuity conductor, complete all as specified and directed. (Note - 2 runs of 4 Sqmm and one run of 4 Sqmm for earth continuity including PVC Conduit/Casing capping shall be measured as one unit.

Supply & Fix MCB SP 6 to 32 Amps10 KA, 'B' Series, 240V, 50HZ, ISI Marked, complete all as specified and directed

Supply & Fix MCB SPN 6 to 32 Amps10 KA, 'C' Series, 240V, 50HZ, ISI Marked, complete all as specified and directed

Suneetha Engineers and Contractors (BID ID -3416984)

KUZHIKKAL ENTERPRISES (BID ID -3423459)