SPECIAL REPAIR TO BLDG NO P-11 AND P-22 IN NN-1 AT INS AGRANI, COIMBATORE

Amount

Dismantling of brick tiles or terracing tiles/Tarfelt single layer or roof and removing the deberis out side MD land all as per specified and as directed.

Demolition of cement concrete of any descriptiion and in any position and removing the deberis out side MD land all as per specified and as directed.

M& L for for PCC 1:2:4 type B1 (20 mm graded stone aggregate ) cast in situ for bed plates etc. all as per specified and as directed.

M&L for 15 mm thick water proofing cement plaster in cement mortor 1:3 mixed with approved water proofing compound finished even and smooth on concrete surfaces and all as per specified and directed. Note :-water proofing compound will be measured and paid saparately.

Supply only integral water proofing compound approved make.

M/L for water proofing treatment by applicatiion of oil based bituminos primer @250 gm per sqm and the plastered surface over a a coat of blown type bitumen grade 85/25 confirming to IS 702 heated to a working temperature at 180 degree C @1.20 kg per sqm of surface area over 4 mm thick APP modified torch applied water proffing membrane weighing not less than 4 kg per sqm reinforced with non woven polyster matt, weighing n less than 160 gm per sqm having softening point not less than 140 degree C longitudinal tensile strength not less than 650 N/cm tear strength of 180 N (mn) of static punctre resistance of 180, keeping a minimum of 10 cm over lap and 15 cm end lap all as specified and as directed.

M&L for hydraulically,pressed burnt clay tiles plain of size200x200, 19/20 mm machine made laid over cement mortar screed 15 mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in cm 1:3 mixed with 5% crude oil by weight of cement all as specified and as directed.

Disconnecting the existing PVC water tank setting aside (or lowering if required) for repairs, cleaning etc and hoisting if reqd reconnecting and re-fixing in position exc 250 ltr but n exc 500 ltr capacity all as specified and as directed.

S&F PVC (SWR) pipes single socketed including all fittings, in any length with rubber ring joints,110 mm dia, fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings and accessories all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4 sqm each, with shutters, without taking off shutters from the frames all as specified and as directed.

Taking down chowkats or frames n exc 1.5 sqm with shutters, without taking off shutters from the frames all as specified and as directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each easing and refixing in the same opening all as specified and as directed.

Taking down shutters of any description exc 2 sqm each easing and refixing in the same opening all as specified and as directed.

S&F Pressed steel frames of size of frame 165x60mmfor doors with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete as specified .

S/F second class hard wood plain solid straight chowkats and frames, wrought, frames rebated on the solid rounded on chamfered , put together with glue, pinned at joints etc complete as specified .

S&F Second class hard wood Plain, framed,panelled shutters(any number of panels),40 mm thick, with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc complete as specified and as directed.

S&F 35 mm Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars,any numbers etc complete as specified and as directed.

S&F 30 mm Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars,any numbers etc complete as specified and as directed.

S/F Sheet glass ordinary quality,4mm thick and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete as specified and as directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete as specified and as directed.

S/F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS squre tube etc complete as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete as specified and as directed.

M&L for cement concrete 1:2:4 type B0 (12.5 mm graded stone aggregate) as in pressed steel door frame filling etc complete as specified and as directed.

Cutting holes in brick wall built in CM for inserting holdfast and making dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 . Depth of embedded portion of hold fast or lugs measured from the face of the jamb into the wall exc half brick but n.exc one brick etc complete as specified and as directed.

S&F Bands , straps, supports or straps for rainwater, ventilating pipes , including bolts , if required ; hooks (stay), heavy , for large gates; hook and pintle hinges; large hasps and staples ; chains;hand made sliding bolts ; clampls ; hold fast ; wall ties ; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc complete as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 (20 mm graded stone aggregate) as in bed plates, filling around hold fasts of doors and windows etc etc complete as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; ramework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete as specified and as directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded etc complete as specified and as directed.

S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified with powder coating (minimum thickness powder coating 50 micron) etc complete as specified and as directed.

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified with powder coating etc complete as specified and as directed.

S/F Butt hinges medium weight, cold rolled, mild steel 100mm etc complete as specified and as directed.

S/F aluminium handles cast type,anodized 150 mm long etc complete as specified and as directed.

S/F aluminium handles cast type,anodized 125mm long etc complete as specified and as directed.

S/F aluminium handles cast type,anodized 100mm long.

S/F aluminium anodized barrel tower bolt of extruded section, 200 mm long etc complete as specified and as directed.

S/F aluminium anodized barrel tower bolt of extruded section, 150 mm long etc complete as specified and as directed.

S/F aluminium anodized barrel tower bolt of extruded section, 100 mm long etc complete as specified and as directed.

S/F aluminium alloy, anodized, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete as specified and as directed.

S/F aluminium alloy, anodized, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads etc complete as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete as specified and as directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete as specified and as directed.

S&F aluminium anodized barrel tower bolt of extruded section, 150 mm long, but fixed in repairs etc complete as specified and as directed.

S&F aluminium alloy, anodized, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed,but fixed in repairs etc complete as specified and as directed.

S&F aluminium alloy, anodized, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, but fixed in repairs etc complete as specified and as directed.

S&F but hinges medium weight, cold rolled, mild steel 100mm long but fixed in repairs etc complete as specified and as directed.

S/F aluminium handles cast type,anodized 150mm long but fixed in repairs etc complete as specified and as directed.

S/F floor door stopers of aluminium alloy body and tounge, anodized with hard drawn steel spring, fixed in floor, 150mm long fixed in repairs etc complete as specified and as directed.

S&F Second class hard wood Plain, framed,panelled shutters(any number of panels),30 mm thick, with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc complete as specified and as directed.

S&F 100mm Hasp and staple, safety type,aluminium anodised and fixed with screws etc complete as specified and as directed.

Supply and fix in repairs Particle board 18/19mm thick, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work etc complete as specified and as directed.

M&L expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, weight per sqm not exe 4Kg including taking down old expanded metal etc complete as specified and as directed..

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc as specified and as directed..

M/L preparation of new wooden surfaces exc10cm widht or girth and applying two coats of synthetic enamal paint over a coat of pink primer etc complete as specified and as directed..

M/L preparation of new steel surfaces exc10cm widht or girth and applying two coats of synthetic enamal paint over a coat of zink chrome primer etc complete as specified and as directed..

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15cm thickness below or above ground level etc complete as specified and as directed.

M/L Rendering 15 mm thick in cement mortar 1:3 on concrete surfaces of wall/floor as in sunken floors , finished even and smooth without using extra cement, including application of two coats of water proofing chemical paste of brush bond powder and Nito bond liquid manufactured by M/S FOSROC as per manufacturers instruction etc complete as specified and as directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces and laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) lon primed surface by forced application complete as specified and as directed.

M/L Cement concrete type C1, 1:3:6 , using 20 mm graded stone aggregate, as in sunken floor treatment etc complete as specified and as directed.

M/L cement concrete type C1,1:3:6 using 20mm graded aggregate, as in plinth protection, 100mm thick etc complete as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar including cement mortar backing coat etc complete as specified and as directed.

M& L for non skid ceramic tiles, coloured, 7 to 8mm thick (Square/rectangular) area of each tiles exc 0.06 SM but not exc 0.11 SM in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including screed bed or bedding layer of cement mortar 15mm thick in CM 1:4 for laying floor finishes complete as specified and as directed.

M&L for Coloured glazed ceramic tiles in verticle surfaces 300x200x7mm, set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and including screed bed or bedding layer of cement mortar 10 mm thick in CM 1:4 ,for laying floor finishescomplete as specified and as directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, landing, chajjas and similar suspended work complete as specified and as directed.

M&L Re-inforced cement concrete (nominal mix) type B0 1:2:4 (12.5mm graded aggregate) in chajjas, fins, fascias, louvres and RCC perappet fins etc at any height in 3/2 storey building with PCC 1:2:4, type B 0 using 12.50 mm graded aggregate incl necessary scafolding work, form work, rendering on RCC work etc to match with the existing surfaces, all as specified and as directed.

Use and waste of formwork with rough finished surface of concrete flat to chullah hoods, chajjas,troughs and similar work including edges in any hight in two/three story buildings including necessary scafolding all as specified and as directed.

S&F TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finishing even and smooth surface without using extra cement with water proofing compound etc complete all as specified and as directed. Note :-water proofing compound will be measured and paid saparately.

M&L for rendering 5mm thick on fair face of concrete surfaces in cement mortar 1:3 as in ceiling plaster , finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for Grouting 25 mm thick under stanchion bases or grillages, etc. including any temporary shuttering to edges with cement mortar 1:2 etc complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required fixed on wall,110/75/50mmdia, including all fittings etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,50mm dia, fixed to walls etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,75mm dia, fixed to walls etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm dia etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints,110 mm dia, fixed to walls etc complete all as specified and as directed.

S&F PVC (SWR) Bends 50mm bore etc complete all as specified and as directed.

S&F PVC (SWR) Bends 75mm bore etc complete all as specified and as directed.

S&F PVC (SWR) Bends 110 mm bore etc complete all as specified and as directed.

S&F PVC (SWR) Bends 110 mm bore with access door etc complete all as specified and as directed.

S&F PVC (SWR) branch piece,single (single Y) equal or unequal , 110mm etc complete all as specified and as directed.

S&F PVC (SWR) branch piece,single (single Y) equal or unequal , 110mm with access door etc complete all as specified and as directed.

S&F PVC (SWR) branch piece,double (double Y) equal or unequal , 110mm etc complete all as specified and as directed.

S&F PVC (SWR) branch piece,double (double Y) equal or unequal , 110mm with access door etc complete all as specified and as directed.

S&F PVC (SWR) junction,single (single T) equal or unequal , 110mm etc complete all as specified and as directed.

S&F PVC (SWR) junction,single (single T) equal or unequal , 75mm etc complete all as specified and as directed.

S&F PVC (SWR) junction,single (single T) equal or unequal , 75mm with access door etc complete all as specified and as directed.

S&F PVC(SWR) floor trap,plain with grating, including jointing with solvent cement,75mm etc complete all as specified and as directed.

S&F PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement etc complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75mm etc complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair face of brick work or concrete surfaces in cement mortar 1:6 as in internal plastering , finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wallls and applying two coats of oil emulsion distemper over a coat of alkali resistant priming coat etc complete all as specified and as directed.

M/L rendering 10mm thick as backing coat on fair face of brick work or concrete surfaces in cement mortar 1:4 in external plastering , and 5mm thick final coat in CM 1:4 with approved water proofing powder over the backing coat, finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement based paint priming with alkali resistant priming paint etc complete all as specified and as directed.

M&L for Preparation of old treated surfaces of walls and applying one coat of oil bound distemper etc complete all as specified and as directed.

M/L for Preparation of old treated surfaces of walls and applying one coat of cement based paint etc complete all as specified and as directed.

M/L for Preparation of old treated surfaces of ceiling and applying one coat of white wash etc complete all as specified and as directed.

S&F in repair Vitreous China Wash Basin, white, flat back, size 550X400mm including brackets etc complete all as specified and as directed.

S&Fix in repairs, Pillar taps,15 mm bore ,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and as directed.

S&Fix in repairs Tubular towel rail,brass chromium plated, 20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed.

Supply and fix in repair Kitchen Plate Rack with four shelves made out of stainless steel sheet 1mm thick over all size 90cmX80cm X 25cms etc complete all as specified and as directed.

S&Fix in repairs Vitreous China Wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),complete, all as specified and as directed.

S&Fix in repairs PVC valveless, syphonic action type, Flushing Cistern, 10Ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets, etc complete all as specified and as directed.

S&F Flush pipe of polyethylene of low or high density of PVC. 32 mm dia, for low level flushing cistern etc complete all as specified and as directed.

S&F in repairs ,Chromium plated brass Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm dia,etc complete all as specified and as directed.

S&F in repairs , Chromium plated fancy type brass Stop valves/ Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,15mmdia,etc complete all as specified and as directed.

S&F Health faucet , brass , chromium plated suitable for 15mm bore pipes etc complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.

S& F in repair Chromium plated Shower roses with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and as directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed.

Taking down & Refixing old steel tubing / UPVC pipe and connections in new or old position (Walls, ceiling, floors/trenches etc.) of 25mm bore etc complete all as specified and as directed. Note : (a) The rates include for cleaning or rerunning the old screw threads as required (b) The rates include for Fittings such as Sockets, bends, elbows, tees, short pieces, caps, plugs, and union etc. if required to be replaced.

Taking down & Refixing old steel tubing / UPVC pipe and connections in new or old position (Walls, ceiling, floors/trenches etc.) of 20mm bore etc complete all as specified and as directed. Note : (a) The rates include for cleaning or rerunning the old screw threads as required (b) The rates include for Fittings such as Sockets, bends, elbows, tees, short pieces, caps, plugs, and union etc. if required to be replaced.

Taking down & Refixing old steel tubing / UPVC pipe and connections in new or old position (Walls, ceiling, floors/trenches etc.) of 15mm bore etc complete all as specified and as directed. Note : (a) The rates include for cleaning or rerunning the old screw threads as required (b) The rates include for Fittings such as Sockets, bends, elbows, tees, short pieces, caps, plugs, and union etc. if required to be replaced.

M&L for UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings of outer dia of the pipe 20mm,including taking down old pipe etc complete all as specified and as directed.

M&L for UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings of outer dia of the pipe 15 mm,including taing down old pipe etc complete all as specified and as directed.

M&L for 3 layer PP-RC (Polypropylene random copolymer) pipes outer dia 20 mm SDR 7.4 & PN 16 UV stalilised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete fixed /concealled on wall floor ceiling all as specified and directed.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed.

S&F in repair Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm etc complete all as specified and as directed.

M&L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs , pillars, window cills, cooking platform and like in cement mortar (1:4) over screed bed of 20 mm thick CM 1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white etc complete all as specified and as directed.

S& F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms) (for WHB & Sink) etc complete all as specified and as directed.

S&F Bottle trap of PTMT bore 32mm having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) (for WHB) etc complete all as specified and as directed.

S&F Bottle trap of PTMT bore 40mm having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) (for Sink) etc complete all as specified and as directed.

S&F in repair Grating Doom 125mm dia of PTMT (Minimum weight 25gms) etc complete all as specified and as directed.

M/L preparing the old painted surface of wood of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

M/L preparing the old painted surface of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.

M&L for concealed point wiring with multistranded colour code copper conductor in FRLS PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new GI boxes of 1.6 mm thick including one coat of synthetic enmelled black paint and providing new 3mm thick plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for one light point/fan point/bell point controlled by one switch. Note : Red/Blue/Yellow for phase, black for Neutral and Green for Earth.

All as per item No. 128 above , but one three pin socket outlet 5 Amps, on independent Board.

All as per item No.128 above , but one three pin socket outlet 5 Amps on the same Board.

All as per item No. 128 above , but one 3 pin socket outlet 15 amps independent with cable 2.5 Sqmm.

All as per item No.128 above , but one light point controlled by two 2 way switches.

M&L for concealed sub main wiring with 3 run of 6 sq mm for phases, neutral and earth using single core multistranded copper conductor as per IS 694 PVC (FRLS) insulated, unsheathed ,multistrandard copper conductor drawn in and including PVC conduit with all accessories etc and earth conductor connected to common earth dolly complete including taking down old wiring all as specified and as directed.

Supply & Fixing stepped type electronic fan regulator flush type on the phenolic laminated sheet etc. all as specified and as directed.

Supply & Fixing switch piano, flush type single pole one way 5 Amps etc. all as specified and as directed.

Supply & Fixing Switch piano, flush type single pole two way 15 Amps etc. all as specified and as directed.

Supply & Fixing socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type etc. all as specified and as directed.

Supply & Fixing switch piano, flush type single pole one way 15 Amps etc. all as specified and as directed.

Supply & Fixing socket outlet 2 in 1, 3 pin 5 A etc. all as specified and as directed.

Supply and fixing Ceiling rose 3 phase Polycarbonate, isolated body etc. all as specified and as directed.

Supply and fixing bell push, flush type, 5 amps etc. all as specified and as directed.

Supply and fixing in repairs Bell, AC, Ding Dong type 230 Volt etc. all as specified and as directed.

Supply and fixing sheet metal enclosure single pole and neutral 8 way double door with 200 amps rated bus bar complete all as specified and directed. Make : L&T/Seimens/Schneider.

Supply and fixing sheet metal enclosure triple pole and neutral 6 way double door with 200 amps rated bus bar complete all as specified and directed. Make : L&T/Seimens/Schneider.

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 to 20 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Make : L&T/Seimens/Schneider.

All as per Item No. 145 above but SPN 40 Amps. Make : L&T/Seimens/Schneider.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) 63 Amps and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. Make : L&T/Seimens/Schneider.

Cutting of chases, pinning in. making good to facing wher required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshedes, shelves, lintels, etc, and cutting chases for concealed conduit wiring, etc and making good cutting not exc. 10 cm girthcomplete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Wipro/Philips/GE

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Wipro/Philips/GE

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Fixing only exhaust fan (M.D.supply) and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed.

S&F LED Bulb 7 watt complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

TECKXPERT ENTERPRISES

Krishna Engineering

K S MUTHU CONSTRUCTTIONS

p.chinnasamy