SPECIAL REPAIR TO BLDG NO 174 MAIN OFFICE AT STATION HEALTH ORGANAISATION (LARGE) SECBAD UNDER AGE B/R I AND E/M (S) OF GE (SOUTH) SECUNDERABAD

Amount

Demolition of cement concrete (un reinforced ) of any description and in any position not otherwise specifically provided including removal of existing roof treatment of any type and any description & floor finishes complete all as specified and directed.

M&L for 40mm thick plain cement concrete type B1(1:2:4) ( using 20 mm graded crushed stone aggregate) as in padding (level course) on roof finishing cement concrete surface even and fair complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:3) using water proofing compound @3% of weight of cement or as per manufacturer instruction as in roof and chajjas finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound will be measured and paid separately under relevant item.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

Material and labour for Water Proofing Treatment with APP based Standard Membrane over PCC padding in approachable roof with the following courses of treatment : (a) Apply bituminous primer ( IS 3384 ) @ 0.30 Kg per Sqm of the surface area including cleaning the surface (b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced (3.50kg /Sqm ) with 10 cm overlaps and torch bonded at joints including surface preperation before and after application of treatment as per manufacturers instruction complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F Rolled sections of grade Fe 410W (Gde E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

Dismantling AC corrugated or semi corrugated etc sheets in roof coverings complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and as directed.

Providing and fixing tiled false ceiling of size(600x600)mm in true horizontal level suspended on interlocking T-24 Grid of hot dipped galvanized corrosion free becase of the zinc coating 120GSM sections. It consists of main"T" runner of size 24x32x0.3x3000mm, cross"T" of size 24x32x0.3x1200mm, secondary cross"T" of size 24x32x0.3x600mm and PPGI wall angle of size 24x24x0.4x3000mm. The GI powder coated wall angle24x24x0.4x3000mm fixed along the perimeter of the ceiling to Walls, partitions or columns etc.,with wooden screws at 300mm centers placed at 600mmc/c. is fixed with Rawl Plug 08x45mm creating 1200mmx1200mm grid. Main-T runners 24x32x0.3x3000mm are then suspended at 1200mmc/c from ceiling using 2mm GIwire. The cross T sections of 24x32x0.3x1200 mm is interlocked between the main T at 600mm center to centert of or magrid of 1200x600mm and then secondary cross "T"24x32x0.3x600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally the PVC tiles of size 595x595x8mm having PVC lamination infront side & Aluminum foil back on rareside need to be layed on the above grid frame. The PVC tile has humidity resistance RH 90%, Break strength of>160N, Fire resitance of Class AG3, 8624-1997 and NRC-0.15. Note : Colour of false ceiling shall be approved by Engr-in-Charge and GE. complete all as specified and directed.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.complete all as specified and directed.

M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers & instructions complete all as specified and directed.

S&F PVC wall panelling including GI Frame work comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall ueing nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm fixed to wall at approx 900mm centre to centre with gleat and steel expansion fasteners with and including wall section of 0.55mm thickness having kurled web of 50mm and flange of 28mm each with PVC sheet of 1.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre fixed with joining for 'J' trim & 'T' Section complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 ( using 40 mm graded crushed stone aggregate) as in plinth protection of average 75mm thick including finishing cement concrete surface fair and even complete all as specified and directed .

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in subbase of floor complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as below floor finish complete all as specified and directed.

M&L for 40 mm thick plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as below floor finish complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate as in Coping and similar work. complete all as specified and directed.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

M&L for 10mm thick vitrified light shade doubly charged polished ceramic tiles (square/ rectangular),area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 10mm thick vitrified light shade doubly charged polished ceramic tiles (square/ rectangular),area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm , in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed.

M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and directed.

All as per item No 25 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1:4 complete all as specified and directed.

Dismantling of stone slab of tiles of any description laid bedded and pointed in any motar complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement 20mm screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and directed.

M & L for granite work of any type 18-20mm thick ( of any type) work table rubbed & polished in steps , jambs , pillar, widow cills, cooking platforms and laid over 15mm thick screed bed or bedding in layer of in CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as specified and directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed.

M & L for brick work with old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as specified and directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for prepartion of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer including a coat of 3mm thick in (two coats) wall care putty complete all as specified and directed.

M&L for complete removal or existing wall treatment of old surfaces and applying two coats of oil bound distemper over a coat of primer over one coat of 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes complete all as specified and as directed.

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed.

M&L for preparing old plastered surface of ceilings by removing dust, loose particles, cement laitance, curing compound, oil, grease or other contamination and metal surface free from rust, scale, oil and grease and rendering 15mm-20mm thick fibre reinforced polymer modified repair mortar with bonding agent of M/s MC-Bauchemie/STP/CIPY/SIKA/ Pidilite/ Dr fixit/ Asian Paints/ Thermax applied as per manufacturers instruction complete all as specified and as directed

M&L for applying three coat of white wash on ceiling on new plastered surfaces etc complete all as specified and directed.

M&L Preparatioin of old wooden surfaces of any description over 10CM width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel window, ventilators etc complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: 1.M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. 2. For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces exceeding 10 CM girth or width complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track of area not exceeding 2Sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.complete all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.

Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed.(Glass shall be paid separately). Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F 12mm thick toughened glass door with SS 304 grade patch fittings and accessories as per manufactureres instruction. complete all as specified and directed. Note: Rate shall be inclusive of LOGO and itching letters (upto 100 Nos any size) on glass door

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate as in block for fixing of hold fast , window cill and similar items including necessary formwork complete all as specified and as directed .

S & F powder coated (Min thickness of powder coating 50 microns) Anodiesed aluminium frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc complete all as specified & directed.

S & F powder coated (Min thickness of powder coating 50 microns) Anodiesed aluminium window and ventilator shutters, sliding type without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as suitable handle (1No) complete all as specified.&directed.

S&F powder coated (Min thickness of powder coating 50 microns) Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary oining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F 18 mm thick plywood BWR type fixed with screws with timber framework complete all as specified and directed.

Material and labour for 1 mm thick colour / white laminated sheet fixed to wooden surface with glue complete all as specified and directed .

S & F tinted glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips/beadings if required of any description complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm. complete all as specified and directed.

S & F sheet glass ordinary quality 4mm thick n exc 0.50 sqm in each pane and glazing with oil putty/glazing clips of any description in cluding hacking out old broken glass (any thickness, size, quality or description) from wooden frame glazed with putty or beads compete all as specified and directed.

S&F 100 mm long stainless steel butt hinges complete all as specified and directed.

S&F 150mm size stainless steel handles, fabricated type complete all as specified and directed.

S&F 150mm long stainless steel barrel tower bolt of extruded section complete all as specified and directed.

M&L for stainless steel sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified and directed.

S&F floor door stopper of stainless steel body & tongue, with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with stainless steel wire staples complete all as specified and directed .

S&F continuous (piano) hinges 30 mm width of flap, brass, bright finish or electrogalvanised complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and directed.

S&F in repair 20mm dia Stainless steel Decorative type draphery curtain rods with brackets and side globes of approved quality for each length of rod complete all as specified and as directed .

Supply and fix 200 mm long stainless steel hinge for cabinets auto close , concealed type complete all as specified and directed.

S&F for brass mortice lock with 4 lever vertical type size 100mm complete all as specified and directed.

Supply and fix in repair bathroom mirror cabinet PVC of size 400 X 500 mm fancy type complete all as specified and as directed. Make : PrayagCat No-554 equivalent of vectas/ flora steels Pvt.Ltd .

S&F in repair CP Soap dish fixed with chromium plated brass screw complete all as specified and directed.

S&F in repairs toilet paper holder, vitreous china, box type coloured, fixed with chromium plated brass screw complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to e.290.Gde-E-165 complete all as specified and directed .

M&L for applying two coats of synthetic enamel paint over a coat of red oxide , zinc chrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity complete all as specified and directed.

S & F in repairs, vitreous china bowl urinal, white,full stall type, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.

Supply & fixing in repair vitreous china wash basin oval type , white size 550x400mm embedded in grainite top and including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipe complete all as specified and directed.

“S&F in repair 600mm x 450mm seamless bevelled edge mirror mounted on stainless steel studs and fixed with ss screws on wall complete all as specified and s directed”.

S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make :Jaquar Cat No:CON-107 KN / or Equivalent make specified in PS here in after.

S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make : Jaquar Cat No:CON-021KN or equivalent make specified in PS here in after.

S&F in repair angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and directed. Make : JaquarCat No:CON-059KN or Equivalent make specified in PS here in after.

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified and as directed. Make : JaquarCat No:ALD-579 or Equivalent make specified in PS here in after.

S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and directed. (Make : Prayag Cat Part No PIS-12 H)or Equivalent make specified in PS here in after.

S&F in repair three way wall mixer with hand shower connecting legs & wall flanges complete all as specified and as directed. Make : Wall mixer Cat No: FLR-5281 of Jaguar or equivalent & Hand shower Cat No: Jaquar HSH-CHR-1781or Equivalent make specified in PS here in after.

Supply and fix in repair 150 X150 mm overhead shower complete all as specified and directed. Make :Jaquar Cat No:OHS-CHR-1605 or Equivalent make specified in PS here in after.

Supply and fix in repair shower arm 400 X 25 X25 mm square shape for wall mounted shower complete all as specified and directed. Make :Jaquar Cat No:SHA -455L400 or Equivalent make specified in PS here in after.

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated. complete all as specified and directed.

S&F in repairs CP towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed. (Make : Jaquar cat No ACN-CHR-1121S or Equivalent make specified in PS here in after)

S&F in repairs stainless steel grating dormof 125 mm dia chromium plate grating for nahani traps with or without hole for waste pipe complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and directed.

S& F for 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc including taking down of old tubing of any description complete all as specified and directed.

S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc including taking down of old tubing of any description complete all as specified and directed.

Cutting Chases , pinning in , making good to facing where required and pointing in CM 1:3 to ends or edges of landings , steps , cills , sunshades , shelves , lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified and directed.

S&L in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and directed.

Demolition and beaking up drain AC pipes/PVC pipes/CI Pipes set in cement mortar of any dia and size complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor bore of the pipe 110 mm complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor bore of the pipe 75 mm complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 75 mm complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single ( single 'T') equal or unequal complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed .

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor bore of the pipe 150 mm complete all as specified and as directed.

S&F PVC (SWR) bends 150 mm complete all as specified and directed.

Dismantling water tanks exc 1000 but n.exc2000 ltr capacity and removing to store complete all as specified and directed.

S&F rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for slab,shelves etc complete all as specified and directed

Use and waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

M&L for RCC type B1 1:2:4 (using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.

S&F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Supply and fix in repair CP Quarter Turn Sink Cock with regular swinging spout ( wall mounted model ) with wall flange complete all as specified and directed. Make : Jaquar Cat No-FLR-5347N or Equivalent make specified in PS here in after.

Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators etc and removal of unserviceable material out of site area complete all as specified and directed.

Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified & directed.

Taking down existing unserviceable MCB's/MCCB's/Distribution boards any capacity complete all as specified & directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor frlsh cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable for modular fittings with back plate and cover plate for housing modular switches, sockets, fan regulators etc. complete flushed to wall and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch. Note :- (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

All as per Sl item No 124 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator complete all as specified and directed.

All as per Sl item No 124 above, but for One 5 Amps socket outlet point on the independent board. complete all as specified and directed.

All as per Sl item No 124 above, but for One 5 Amps socket outlet point on the same board. complete all as specified and directed.

All as per Sl item No. 124 here in before, but for One Bell point controlled by one, bell push complete all as specified and directed.

All as per Sl item No124 above but for One light point controlled by two way switch complete all as specified and directed.

All as per Sl item No.124 here in before, but for wire 2.5 Sqmm for Power point. complete all as specified and directed.

S & F in repair Switch Modular type 1 Module 6 Amps, 230 volts complete all as specified and as directed.

S & F in repair Switch Modular type 1 Module 16 Amps, 230 volts complete all as specified and as directed.

S & F in repair Switch Modular type 2-way, 1 Module 6 Amps, 230 volts complete all as specified and as directed.

S & F in repair Bell Push Switch Modular type 1 Module, 230 volts complete all as specified and as directed.

S & F in repair Socket Modular type 2 Module 6 Amps, 230 volts complete all as specified and directed.

S & F in repair Socket Modular type 2 Module 16 Amps, 230 volts complete all as specified and directed.

S & F in repair Electric Bell Ding-dong working on 230 volts AC Supply complete all as specified and as directed.

S & F in repair ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

S & F 15 Watt LED Bulb 5 star rated efficacy not less than 100 Lumen/watts,rated life 25000 burning hours with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings including taking down the old unserviceable complete all as specified and directed.

M&L for replacement of old unserviceacble light fitting with LED batten light fitting 20 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ Havells ENDURALINEARPROBS20WLED865PCSSIND / Bajaj-BCLAB20WCWLEDXT

S & F 10 W surface / wall mounted 2 feet LED batten light fitting input voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make:Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / PHILIPS BN021LED12S 6500K PSU GR / WIPROLL20-111-XXX-65NE3 /Bajaj-BCLAB10WLEDCWLED

S & F recess mounting LED down light fitting 2' x 2' of capacity 36 Watts powder coated white CRCA full glow,efficacy 120 lumen/watts rated life 50000 burning hours suitable for false ceiling pop/grid ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed. Make:Crompton: LCTLRP-36-FO-CDL / PHILIPS RC308LED36S6500 / HAVELLS VENUSEXL2X2PLR36WLED865SWH /WIPRO-CRCO10R036HE57G4/Bajaj-BZRSQL43LXEWHODSD

S & F recess mounting LED round down light fitting of capacity 12 Watts powder coated white glow,efficacy 100 lumen/watts rated life 25000 burning hours suitable for false ceiling pop/grid ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed . Make:Crompton:LSCRM-12-CDL/Havells VIBEFLRDDLR12WLED857S/Philips DN296B LED 12S-6500 PSU WH /WiproLD13R-151-XXX-57-XX/Bajaj-BGSLO12LLEDWHVC

S & F recess mounting LED round down light fitting of capacity 15 Watts powder coated white glow,efficacy 100 lumen/watts rated life 25000 burning hours suitable for false ceiling pop/grid ceiling including making electrical connection from ceiling rose to light fitting complete all as specified and as directed . Make:Crompton:LSCRM-15-CDL/Havells VIBEFLRDDLR15WLED857S/Philips DN296B LED 20S-6500 PSU WH S2/Bajaj-BGSLO15LLEDWHVC/Gold Medal-GL91327CD/Wipro-LD13R-171-XXX-57-XX

S & F LED light fitting 10W bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal body of suitable size complete all as specified and as directed. Make: Crompton CIS-306-10-57-SL-DP-NBK/ PHILIPS WT202W LED10S CW PSU S3 PC/ HAVELLS HEXAFT10WLED857SSYMBOPC /WIPRO LW07-141-XXX-57-G1/Bajaj-BIBWP10W LED

M&L for replacement of old unserviceacble light fitting with LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in all respect as specified and directed by engineer-in-charge.complete in all respect as specified and directed. Make:Crompton TRP-409-45-57-SL-GL-NSG / HAVELLS ENDURASUNDOWNSL45W LED765PASYBOPC /Bajaj-VISTAP45LWHPOPCSD

S & F in repair MCB SP 6 to 32 Amps 240 volts C- type complete all as specified and directed.

S & F in repair MCB SPN 40 to 63 Amps 240 volts C- type complete all as specified and directed.

S & F in repair replacement sheet metal enclosure MCB DB SPN 4 way, 240 volts double door with locking system (For Servent Qtr) complete all as specified and as directed.

S & F in repair TPN DB 4 way double door with MCB 4P as incoming, made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and as directed . Note :- MCB TPN shall be measured and paid separatly.

S & F in repair MCB TPN 63 Amps 240 volts complete all as specified and directed.

S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps complete all as specified and directed.

S & F Power Unit for AC with one 25 Amps socket, (incl 3 pin plug Top 25 Amps) one electronic starter 25 Amps and one MCB SPN 25 Amps 'C' curve all accessoroes shall be fixed in one six module metal GI box, frame and cover plate and electrically connecting up as per Havells Cat No. DHDUCDP0253025 or equivalent model in Legrand / L&T. complete all as specified and directed.

Taking down Submain wiring and M & L Submain wiring with 4 runs of single core 10 sqmm PVC FRLSH insulated frlsh multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 32mm dia including one run of single core 10 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.

All as per Item Sl No-154 above but using 3 runs of single core 6 sqmm. (for TPN DB to SPN DB) complete all as specified and directed.

All as per Item Sl No-154 above but using 3 runs of single core 4 sqmm. (for AC & Geyser Point) complete all as specified and directed.

All as per Item Sl No-154 above but using 3 runs of single core 2.5 sqmm. (for Bldg Security Lights) complete all as specified and directed.

Disconnection and removing the existing unserviceable earthing and M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded crushed stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on complete all as specified and directed. (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate).

S&F ceiling fans complete with blades,copper winding, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery not less than 210 CFM with service value more than equal to (≥) 6.00, BEE Five star rated with brushless direct current motor (BLDC) white colour complete all as specified and directed. Make:Gold Medal cat part no.SCFS 500748/Bajaj Cat part No:ENERGOS 28/ Crompton Cat part No:ENERGION RIVIRA/Havells Cat part No:PRO 28BLDC/Luker Cat part No:ECO28NEOBLDC Regulator 222cmm Note :- Cost for Taking down old existing Ceiling fan and deposit to MES Store shall be born by the contractor only and no extra cost against it shell be paid.

S&F exhaust fan, metal body AC single Phase 230V of size 300 mm sweep,RPM 1200 with, copper winding,blades,rag-bolts, and frame and louvers complete including making suitable size hole in wall for fixing of fan complete all as specified and directed. Make: Havells Cat part No:Ventil air DSB /Gold Medal EFS851012 HAVAC PLUS /Crompton drift air plus300mm/Bajaj-Supreme plus/Luker cat part No:TuuliLME12

S&F exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep complete all as specified and directed. Make:Havells Cat part No:Vetil Air DX HS/Gold Medal EFS850310 AIR MAXX/Crompton VENTILUS250MM/Bajaj-Maxima neo/Luker cat part No:Viento LX10

SAI RUPA CONSTRUCTIONS (BID ID -3491546)

K LAKSHMAN SINGH AND CO (BID ID -3490123)

VACON INFRASTRUCTURES (BID ID -3491813)