Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹32.4 L+₹53,481.50 (1.68%)Rejected-AOC NO 439 AHIV ADAN 11ND FLOOR 2RD STAGE INDIRA NAGAR BANGALORE 560 075 | BENGALURU URBAN | KARNATAKA | 560075 | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹33.7 L+₹1.9 L (5.81%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹35.6 L+₹3.7 L (11.7%)Rejected-AOC | L4 | Rejected-AOC Higher bid value |
Tender Value
Refer Docs
EMD Value
₹73,000
Closing Date
22 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BANGALORE
GE (AF) BANGALORE, HQ TC AIR FORCE , BANGALORE 560006
PROVISION OF TENNIS COURT AT HQTC (U) BANGALORE
2023_MES_632898_1
8173/GE/73
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BANGLAORE
AS PER NIT
5 documents required · 5 mandatory
₹500
GE (AF) BANGALORE
₹73,000
3 Apr 2024
15 Dec 2023
29 Jan 2024
15 Dec 2023
22 Jan 2024
6 Jan 2024
16 Dec 2023 - 23 Dec 2023
Amount
Surface excavation n exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils in soft/loose soil
Spreading and levelling of excavated earth in layers n exc. 25 cm thick as on floor including well ramming with watering etc as required complete all as specified and directed by Engr in Charge.(Note: Excavated Earth obtain from item No 1& 2 above)
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L for PCC type D2 ,1:4:8 (Using 40 mm graded stone aggregate) as in foundation filling and mass concrete
M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1: 6 , complete all as specified.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions and as direction by Engr in Charge (WPC shall be measured & paid separately). .
Preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.
M&L for laying and compaction of 100mm thickness WMM made of 30mm coarse aggregate mixed with Msand. Laying of 75mm concrete made of M20 grade.
Supply and installation of ITF certified high performance Sports acrylic with 3 year warranty. 9 layer system - 1 layer Primer (0.25mm thickness) + 2 layer resurfacer (0.70mm thickness) + 3 layer cushion (1.90mm thickness) + 3 layer Colour surfacer (1.35mm thickenss). Total thickness of 4 to 4.2mm
Supply and installation of Championship tennis net 3.6 ft post height and 3 ft net height and 42 ft in length.
M&L for movable pole 150mm dia with non hydrulic portable movable system with Acrylic board 1.8 m x 1.05mx 20mm thickness and 20 mm dia solid basketball ring complete all as specified as per manufacture instructions.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed all as directed by Engr in charge
M & L for plain cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete.
M & L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 height all as specified and direction by Engr in Charge.
S & F mild steel trussed, purlins, fencing posts,crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) Conforming to Fe-290 Gde E-165 including distance pieces, cleats , nut & bolt any size & length etc.
Supply only 50x50mmx4mm dia chain link MS galvanised fencing or any size or type as direction by Engr in Charge. including line wires any type of standards rails , standing bolts etc including provision of binding wire all as per specified and directed
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire and taking down old fencing as direction by Engr in Charge.
M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied priming.
Excavation in trenches not. exc. 1.5m wide and not exc. 1.5 deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in,including spreading, levelling ,watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and directed by Engineer-in-Charge.
Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
Material and labour for sand cushioning for under ground cable with locally available dry sand for protection of cable including spreading and consolidations, complete all as specified and directed.
Supplying and laying un-reinforced precast concrets cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed by Engineer-in-Charge.
Material & Labour for plain cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foundation,filling and mass concrete in foundation of stay assembly and pole complete all as specified and directed by Engineer-in-Charge.
Material & Labour for plain cement concrete 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in benching,coping including weathering slightly rounded or chamfered angles with necessary plastering work complete all as specified and directed by Engineer-in-Charge.
Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 sqmm 2 core complete all as specified and directed .
All as per item No-8 but of size 16 sqmm 4 core.
Supply, installation and erection steel tubular swaged welded poles complete with MS base plate of 6mm thick of size 300mmx300mm at bottom duly welded and MS pole cap at top, poles shall made out of ERW MS tubing confirming to IS-1161 part-II, type 410 SP -31(9.0m long) including drilling of holes of required size and nos for fixing of cross arms/clamps, poles shall be painted internally throughout using anti corrosive black bituminous paint and externally painted with two coat of red oxide primer and two coats of aluminum paint for expose surface and two coats of black bituminous paint for portion embedded in concrete,painting three alternating layer of each black and yellow paints at lower portion of pole each of 300mm height at 300mm spacing, writing pole no. with black paint in yellow paint circle 10cm dia at suitable height complete all as specified and directed by Engineer-in-Charge.
M & L for Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specified & directed by Engineer-in-Charge.
Material and labour for 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including Flat Iron clamps=02 Nos of size 50x6mm, with nut bolt and washers complete all as specified & directed by Engineer-in-Charge.
S&F with pole PVC cable loop box, size not less than 200 mm x 140 mm x 95 mm, out door type, IP 65 including 4 Nos aluminum bus bar of size 25mmx5mm mounted on porcelain insulators with one MCB SP 6 amps 230 volts connected to street light fitting sub main wire and using FI clampsof size 20mm x3 mm for fixing of PVC cable loop box with pole,including nuts,bolts & washers and connecting the cables to bus bars with using suitable size GI nut, bolts and washers and aluminum lugs etc and complete all as specified & directed by Engineer-in-Charge.
M&L for sub main wiring from street light to junction box with two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on pole surface, wall, ceiling etc including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly omplete all as specified and directed by Engineer-in-Charge. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.
S&F LED flood light fitting 200 watts,240 Volt, single phase, AC outdoor type,high pressure die cast aluminum hosing with IP66 protection with impact and corrosion resistant complete with driver and lamp and testing complete all as specified & directed by Engineer-in-Charge Make Havell Cat Part No- JETAIRISALPHAFL200WLED857PBOLTG or equivalentin Philips / Wipro.
Supply, installation,commisioning and testing out door type LT Panel made out of mild steel CRCA sheet of 3.15 mm thick with angle iron frame of size 40mm x 40mm x 6mm with canopy top,two side ventilators,front and back openable door hinged, double door shutters with locking arrangement (including lock & key), weather & vermin proof suitable for operation on 440 volts, 50Hz, 3 Phase 4 wire AC supply including bus bar chamber and aluminium bus bar of suitable size 4 nos mounted on hygroscopic insulators,all pre wired with suitable size of copper conductor cable including painted with two coats of powder coated paint over a coat of red oxide zinc chrome primer on out side surface and two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer on internal surfaces and providing necessary foundation/plateform of the LT panel with PCC 1:2:4 type B2 including provision of lugs and cable gland for housing with the following fitment accessories. Incomming:- (a) MCCB 4 Pole, 63 Amps, 415 volt of breaking capacity not less than 16 KA -1 No (b ) Digital type ammeter composite type with suitable CT, 0-200 amps -1 No (c) Indicator lamp LED type set of three(R,Y,B) - 1 No (d) Digital type Voltmeter composite type with ,0-500 Volts -1 No Outgoing:- (a) MCB TPN 20A "C" curve, 415V,10KA 50 Hz, AC -03 Nos .
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI strip 32mm X 6mm main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board,LT panel etc with & including adequate quantity of charcoal dust and common salt around earth plate, PCC 1:3:6 type C-1 using 20mm graded stone aggregate for earth pit with pre cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia MS round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe, complete all as specified & directed by Engineer-in-Charge.
Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure all as directed.
Shiva Shakthi Electrical Enterprises
SRUSHTI CONSTRUCTIONS
OM CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .