Tender ID

DEFPROC

Active

Works

Civil Works

ADDITION ALTERATION AND SPECIAL REPAIR TO CERTAIN BUILDINGS IN TRG REGTS AT GOA UNDER GE PANAJI

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

Garrison Engineer Panaji Goa | North Goa, Goa

Amount: ₹12.8 CrCloses: 27 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published30 Oct 2026
Submission Opens20 Nov 2026
Closes27 Nov 2026
Bid Opening4 Dec 2026

Tender Value

₹12.8 Cr

EMD Value

₹9.6 L

Closing Date

27 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

Chief Engineer Pune Zone

Address

HQ Chief Engineer Pune Zone Camp, Pune 411001

Work Description

ADDITION ALTERATION AND SPECIAL REPAIR TO CERTAIN BUILDINGS IN TRG REGTS AT GOA UNDER GE PANAJI

Tender Information

Tender ID

2026_MES_796577_1

Reference Number

84707

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

540 days

Location

Garrison Engineer Panaji Goa

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Class S and Category a(i)

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of application for issue of tender and scanned copy of DD for tender fee. (.pdf)

RequiredScanned copy of DD for EMD if unenlisted contractor. (.pdf)

RequiredScanned copy of enlistment letter. One class below bidder to upload the docs as per Note 1 of NIT. (.pdf)

RequiredScanned copy of all other eligibility documents required as per tender and NIT. (.pdf)

RequiredScanned copy of Integrity Pact duly signed. (.pdf)

RequiredScanned copy of valid Passport in case of Unenlisted contractor. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹3,000

Tender Fee Payable To

Garrison Engineer Panaji Goa

EMD Fee Amount

₹9.6 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

30 Oct 2026

Published

30 Oct 2026

Bid Opening

4 Dec 2026

Download Starts

30 Oct 2026

Download Ends

27 Nov 2026

Submission Starts

20 Nov 2026

Clarification Period

31 Oct 2026 - 7 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (236 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Dismantling and removing asbestos cement sheets (corrugated, semi-corrugated, etc.) in roof coverings, including wetting, carefully taking down without breaking, packing in sealed polythene,transportation and disposal of asbestos waste through authorised hazardous waste facility as per Hazardous waste Rule 2016 at a place indicated by the Engineer-in-Charge, complete as directed.	11,075.03	Sqm	-	-
-	Dismantling timber scantlings under 40 Sq Cm, balusters, newel posts, etc., of any section and in any position, as in framed work, including removal of nails, stacking of serviceable materials, and disposal of unserviceable materials, complete all as specified and as directed	4,234.68	Rm	-	-
-	Dismantling of unframed timber scantlings in fillets, rails, posts, rafters, purlins etc over 40 sqcm in section all as specified and as directed	46.89	Cum	-	-
-	Taking down wooden roof trusses, coupled rafters or trussed beams clear span above span 4mtrs and upto 8mtrs, complete all as specified and as directed.	210	Each	-	-
-	Dismantling of ceiling boards (Fibre, pulp, insulation, etc.) / Wall Panelling of any type and any thickness including cover fillets and grating complete all as specified and as directed..	7,928.78	Sqm	-	-
-	S&F roof trusses (framed), trussed purlins, crane gantries, rails, fastenings and heavy bracket framing comprising beams, tees, angles, channels or flat sections, including distance pieces, cleats and all necessary connections, conforming to Fe-410-W Grade E-250, Quality-A steel.The work shall include power drilling of holes, cleaning of holes by air pressure, inserting fasteners/nuts and bolts, and filling of holes with epoxy to ensure proper bonding as per manufacturer’s recommendations. The item includes fabrication, erection, fixing, alignment and securing in position as per site requirements and directions of Engineer-in-Charge.	40,209.5	Kg	-	-
-	Supply and fix rolled steel sections as in main and cross beams, hips and jack rafters, purlins where connected to common rafters, and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, using Fe-410-W (Grade E-250), Quality A steel, including all necessary cutting, drilling, alignment, and making good disturbed surfaces, complete all as specified and as directed.	67,196.22	Kg	-	-
-	S&F for Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long and diameter of neck exc 20mm and not exc 25mm, complete all as specified and directed.	1,806	Kg	-	-
-	Supply and fix mild steel (MS) plates (plain or chequered), channels, square-cut or notched, including ordinary and countersunk holes, with riveted, bolted, or welded attachments, using Fe-410-W (Grade E-250), Quality A steel, including all necessary cutting, drilling, alignment, and making good disturbed surfaces, complete all as specified and as directed.	3,789.01	Kg	-	-
-	M&L for Formwork to bed plates sides of pillars,posts, struts, piers, columns and stanchions (horizontal or sloping) for rough finished surfaces of concrete in square, rectangle or polygon, complete all as specified and directed.	210.22	Sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.76 MB

Work Item Documents

Tender.pdf

Tender Documents • 3.28 MB

BOQ_893461.xls

BOQ • 0.52 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Dismantling and removing asbestos cement sheets (corrugated, semi-corrugated, etc.) in roof coverings, including wetting, carefully taking down without breaking, packing in sealed polythene,transportation and disposal of asbestos waste through authorised hazardous waste facility as per Hazardous waste Rule 2016 at a place indicated by the Engineer-in-Charge, complete as directed.

11,075.03

Sqm

Dismantling timber scantlings under 40 Sq Cm, balusters, newel posts, etc., of any section and in any position, as in framed work, including removal of nails, stacking of serviceable materials, and disposal of unserviceable materials, complete all as specified and as directed

4,234.68

Dismantling of unframed timber scantlings in fillets, rails, posts, rafters, purlins etc over 40 sqcm in section all as specified and as directed

46.89

Cum

Taking down wooden roof trusses, coupled rafters or trussed beams clear span above span 4mtrs and upto 8mtrs, complete all as specified and as directed.

210

Each

Dismantling of ceiling boards (Fibre, pulp, insulation, etc.) / Wall Panelling of any type and any thickness including cover fillets and grating complete all as specified and as directed..

7,928.78

Sqm

S&F roof trusses (framed), trussed purlins, crane gantries, rails, fastenings and heavy bracket framing comprising beams, tees, angles, channels or flat sections, including distance pieces, cleats and all necessary connections, conforming to Fe-410-W Grade E-250, Quality-A steel.The work shall include power drilling of holes, cleaning of holes by air pressure, inserting fasteners/nuts and bolts, and filling of holes with epoxy to ensure proper bonding as per manufacturer’s recommendations. The item includes fabrication, erection, fixing, alignment and securing in position as per site requirements and directions of Engineer-in-Charge.

40,209.5

Supply and fix rolled steel sections as in main and cross beams, hips and jack rafters, purlins where connected to common rafters, and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, using Fe-410-W (Grade E-250), Quality A steel, including all necessary cutting, drilling, alignment, and making good disturbed surfaces, complete all as specified and as directed.

67,196.22

S&F for Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long and diameter of neck exc 20mm and not exc 25mm, complete all as specified and directed.

1,806

Supply and fix mild steel (MS) plates (plain or chequered), channels, square-cut or notched, including ordinary and countersunk holes, with riveted, bolted, or welded attachments, using Fe-410-W (Grade E-250), Quality A steel, including all necessary cutting, drilling, alignment, and making good disturbed surfaces, complete all as specified and as directed.

3,789.01

M&L for Formwork to bed plates sides of pillars,posts, struts, piers, columns and stanchions (horizontal or sloping) for rough finished surfaces of concrete in square, rectangle or polygon, complete all as specified and directed.

210.22

Sqm