Construction of Toilet and Bathroom at Mechanical Workshop Anta

Amount

Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting outand disposal of excavtaed earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. HSR Item No. 4.12.1 All kinds of soil.

Preparing watering and ramming surface for PCC Laying in horizontal Old HSR-10.122(a)(i)

Providing and laying in position cement concrete of specifiedgrade excluding the cost of centering and shuttering-All workbelow plinth level and up to Floor IV Level: 1:3:6 ( 1 Cement :3 coarse sand (zone III) : 6 graded cum stone aggregate 20mm nominal size) HSR-6.1.4

Brick masnory Cement mortar 1:3 (1 cement : 3 fine sand). HSR-7.3

Providing and laying damp-proof course with cement concete 1:1.5:3 (cement : 1.5 coarse sand ( zone III ): 3 granded stone aggregate 20 mm nominal size) HSR- 6.9.1 50 mm thick

10mm cement plaster of mix 1:3 ( 1 cement : 3 fine sand) HSR 11.4.2

Distempering with oil bound washable distemper of approval brand and manufacture to give an even shade HSR 11.64.1

Distempering with dry distemper of approved brand and manufacuter (one or more coats ) and of required shade on New work to give an even shade. HSR 11.63

Providing and fixing pressed steel door frames conforming to IS : 4351, Manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead Profile E Fixing with adjustable lugs with split end tail to each jamb HSR 13.3.3.1

Providing and laying in Position C.C of specified grade excluding the cost of contering & shuttering All work below plinth level and upto level to Floor -IV Level. 1:4:8 ( I cement : 4 course sand : 8 stone Aggregate) 40 mm nominal Size as per HSR item No. 6.1.6

Providing and Fixing Panelled or panelled and glazed shutter for doors, windows and celerestory windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class teak wood 35 mm thick shutters HSR12.7.2.1

Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. Complete: 150*10 mm HSR 12.78.3

Providing and fixing ISI Marked oxidised M.S Sliding door bolts with nuts and screws etc. complete: 300*16 mm HSR 12.65.1

Providing and fixing ISI maked oxidised M.S handles conforming to IS: 4992 with necessary screws etc. complete 125 mm HSR 12.69.1

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approval quality filler consisting of whitelead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR 11.76

Finishing walls with exterior decorative cement based paint such as snowcem, robbinsion cem. Etc on newly plasted/conc.surface to give an even shade as per HSR item No.16.61

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work HSR 11.78

Centering and shuttering including strutting, Propping etc. and removal of form for roofs HSR 6.30.3

Reinforced cement concrete work in beams, suspended floors, cum roofs reinforcement with: 1.5:3 ( 1 cement: 1.5 coarse sand ( zone-111) :3 graded stone aggregate 20 mm nominal size). HSR 6.16

Steel reinforcement for R.C.C work Cold twisted bars HSR 6.34.3

Providing and laying brick tiles over mumty roofs HSR 9.14.1

Providing and fixing glazed screen printed border tile 75 mm wide having thickness 5 mm, of approved quality & make, in all shades, design and prints, in dado HSR 10.68

Providing and laying Cermic glazed floor tiles of size 300*300 mm HSR 10.57

Providing and fixing Ist quality ceramic glazed wall tiles HSR 10.62

80 mm thick interlocking paver blocks (M-35) HSR item No.- unique code B0051

Providing and fixing water closet squatting Pan ( Indian type W.C pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushingcistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required: HSR -22.22.1 White vitreous chinaware Orissa pattern W.C pan of size each 1144 2767 3911580*440 mm with integral type foot rests

Providing and fixing C.P brass bib cock of approved quality conforming to IS :8931 HSR-22.104.1 15 mm nominal bore

Providing and fixing C.P brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. HSR - 22.107.1 15mm nominal bore

Providing and fixing wash C.P brass Long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. HSR-22.105.1 15 mm nominal bore

Providing and fixing wash basin with C.I brackets, 15 mm C.P brass pillartaps, 32 mm C.P brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls wherever require: HSR - 22.1.1 White viterious chinaware Wash basin size 630*450 mm with a each 513 1757 2270 pair of 15 mm C.P brass pillar taps

Shower rose C.P brass for 15 to 20 mm inlet 150 mm dia HSR UNIQUE CODE-B1237

Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes HSR 22.85 (a) 15 mm INT DIA HSR 22.85.1

Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes HSR 22.85 (b) 20mm INT DIA HSR 22.85.2

Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copperconductor cable in 1.6 mm thick MS conduit pipe. HSR 23.1.1.1

Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections HSR :- 23.22.5.4 40 amp. to 63 amp. Double pole

Providing and fixing HDPE water storage tanks of sintex 1000 ltr capacity OLD HSR 30.119

The Bhuslana Bhardwaj Co-Op L and C Society Ltd