INTEGRATED RESTORATION AND UPKEEP OF TOILETS, SANITARY INSTALLATIONS, PLUMBING NETWORKS, WASTE WATER PIPE LINE AND KITCHEN AMENITIES FOR JCOS/OR MD ACCN AT OLD CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed.

M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed.

Refixing old steel tubing 20 mm dia with & including new fittings and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

M&L for 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 25mm bore pipe complete all as specified and directed.

Refixing old steel tubing 25 mm dia with & including new fitting and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

M&L for 25mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, complete all as specified and directed.

M&L for brick work with subclass 'B' brickwork straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified.

M&L for brick work (except brick) with sub class B brick straight or curved on plan exc 6 m mean radius built in CM 1: 6 complete all as specified. Note : Old serviceable brick obtained from demolition shall be re-used in this item.

Demolition of mud/pcc in roofs any thickness and in any position and leaping over roof terrace ,removing the demolished material to a distance exc 250 m & n exc 500 m and depositing where directed at a level n exc. 1.5 m above starting point, complete all as specified and as directed.

M&L for 50 mm average thick pcc 1:2:4 type B-0 (using 12.5 mm graded crushed stone agg) in floor/padding finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparing cement concrete surface providing 10mm thick modified plaster in CM 1:4 cement mixed with polymer in ration 1:10 (1 part of polymer and 10 part of cement) applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coats of solvent based polyurethane liquid membraneeach coat not less than 500 micron thick UV stable having SRI value greater that equal to 105 with consumption of 0.61 Kg/Sqm (each coat) second coat should be applied once first coat is fully dried complete all as specified and directed. Note : (i) Make of material is asian paint or equivalent as approved. (ii) Work tobe executed by company professional and company gurantee to be ensured by contractor for 7 year time period.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Treatment to sunken floor and sides as mentioned here after:- (a) cleaning the sunken floor surface with demolition and removing existing pcc, lime conc muddy soil etc including taking down existing treatment to sides and base slab by using sand blaosting with compressed air. (ii) M&L application a coat to side and base of sunken with glass fiber reinforced acrylic modified cementitious coating system with base coat of sika top and seal-107 @ 1.5 kg/sqm glass fiber reinforcment sika Fab-I and to coat with sika seal-107 @ 1.5 k/sqm or equivalent of forsoc or pidilite. (iii) M&L 15 mm thick cement plaster on side and base slab of sunken portion in cement mortar 1:3 mixed with appropriate integral water proofing compound with sika plastocree plus specifed. (iv) M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/sqm on plastered surfaces of sunken sides & base. (v) S&F 25 mm bore GI tube medium grade pipe spout from inside to min 150 mm beyound outer face of the wall. Note : All debris obtained from site will be thrown away out side def land by contractor at his own expense.

M&L for Cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken part of slab complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 mm to 8 mm thick (square/rectangular)area of each tile exceeding 0.06 but not exceeding0.11 , joint free in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and smooth without using extra cement and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) including scaffolding upto height of 8 mtr of building (Jhulla will not be allowed) complete all as specified and as directed by engr-in-charge.

Supply only Liquid water proofing admixture of approved make.

M&L for rendering 10mm thick in CM (1:6) on Brick/Conc surface finished even and smooth without using extra cement on internal surfaces of wall complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:3 on concrete surface in ceiling & finishing the surface even & smooth without any extra cement, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement base paint on wall surface over a coat of primer including scaffolding upto height of 8 mtr of building (Jhulla will not be allowed) complete all as specified and directed.

M&L for preparation of old treated plastered surface and applying two coat of cement base paint on walls over a coat of primer including complete removal of existing treatment including scaffolding upto height of 8 mtr of building (Jhulla will not be allowed) complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer incl 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

M&L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified

Complete removal of existing treatement on wall and applying two coats of exterior emulsion paint apex of asian or equivalent complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F 110mm PVC (SWR) bends any redius with access door complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M&L in repair 150mmx 100mm Salt-glazed stoneware gully traps, square or round mouthed, type 'P' or 'S' and setting and jointing in cement mortar 1:1 complete all as specified and directed.

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair Vitreous china wash down water closet European type pedestral pattern (P or S trap) white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directed. Make : Jaquar Cat No. F-2008161 or equivalent in make as specified in list of make.

S&F as in repairs health foucet Make Jaquar ALD-573 or equivalent with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and as directed and approved by Engineer-in-Charge.

S&F in repair SS soap dish fixed with chromium plated brass screws complete all as specified and directed

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair Corner glass shelf with brass chromium plated bracket fixed to wall complete all as specified and directed. Make Cera Cat No. F5005101 or equivalent in make as specified in list of make.

S&F in repair vitreous china wash hand basin with pedestal pattern white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup) complete all as specified and directed Make : Cera cat Part No. F2008461 or equivalent in make as specified in list of make.

S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed.

S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair 1000 ltr capacity rotational moulded polyethene water storage tanks"ISI marked"double layered (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple and 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe etc all as specified and as directed by Engineer -in Charge.

S&F 15 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed in repairs complete all as specified and directed.

S&F 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed in repairs complete all as specified and directed.

S&F 25 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed in repairs complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair brass chromium plated Tumbler holder all as specified as approved by Engr-in-charge. Make:- Jaquar cat part No AKP 35741P or equivalent in makes as specified in PS.

S&F in repair Kitchen rack plate of stainless steel of size 75 x 60cm of thickness 0.85mm all as per sample kept with GE office.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, and tank base, finishing cement concrete surface even and fair complete all as specified and directed.

M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each all as specified.

Taking down shutters only of any description not exc 1 sqm each including removing from site to store or otherwise as directed complete all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified.

Taking down shutters only of any description not exc 1 sqm but exc 2 sqm including removing from site to store or otherwise as directed complete all as specified.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II.

S&F for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats.

S&F Mild steel black sheet 1mm thick as in covering to door shutter cut to size, edges beaded if directed, hole punched incl round headed screws incl beading turning up metred angle, stopped ends etc with sliding bolt complete all as specified and directed.

S&F 150mm stainless steel handles fabricated type complete all as specified and directed.

S&F 100 mm long stainless steel hinges, complete all as specified and directed

S&F 200mm stainless steel barrel tower bolts of fabricated type and fixed complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M&L MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for Aluminium frame and grill (sliding, fixed or casement) powdercoated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Anodised aluminium window and ventilator shutters, powder coated (Thickness or powder coating not less than 50 micron ) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.), tower bolt 100mm long (1 No) complete all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Rolled MS Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E-250) quality A complete all as specified and directed.

S&F in repair 25 mm dia stainless steel curtain rod of 304 grade for door & windows incl one pair of SS Bracket and steel cover for each rod cut to size and fixed in position complete all as specified and directed.

Dismantling boarding any desccription fixed in any position with nails or any other means complete all as specified and directed

M&L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of synthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed.

M&L Plain fillets. Hard wood square, n.exc 3 sq.cm rectangular or triangular in section, clean sawn, secured with nails or brads complete all as speciied and as directed.

S&F 18 mm thick PVC celuka ply plain white colour both side fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets fixed with complete fitting complete all as specified and directed (Density - 575 to 600 Kg/CBM)(Make Rajshri plastiwood or equivalent in make as specified in PS) complete all as specified and directed.

Demolition of cement concrete reinforced as in chajja, manhole cover, RCC roof slab and hand rail similar suspended work complete all as specified and directed.

M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in manhole covers etc. all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc or n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out any type of soil all specified and directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 200mm bore of pipe complete all as specified and directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 150mm bore of pipe complete all as specified and directed.

supply and laying, jointing and testing in trenches DWCPE SN 8) nominal size 163 (ID)/180 (OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.65 m with and including all items and activities required to make sewer line functional complete all as specified and as directed. Make supreme/prince/finolex complete all as specified and directed.

supply and laying, jointing and testing in trenches DWCPE SN 8) nominal size 175 (ID)/200(OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.8 m with and including all items and activities required to make sewer line functional complete all as specified and as directed. Make supreme/prince/finolex

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channel or benching including finishing the top of benching or for kerb/gola and edging even and smooth using extra cement (Forming fair finished channel shall be measured separately).

Returning, filling in soft/disintegrated Rock (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick all as directed.

Removing surplus soil excavated material exc250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point all as directed.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for concealed for water tubing or concealed condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, coloumn or slab and similar work incl support if required and stitching of cracks with MS U clamps of 8 mm dia @ 150 mm c/c with inserting concrete block strecthner with cement mortar 1:3 mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mesh incl formwork where ever required and finished with 10 mm thick plastering in CM 1:4 finished even and smooth without using extra cement incl preparation of surfaces to recieve finishes complete all as specified and directed

Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring light/fan/bell point with PVC insulated FRLS unsheathed single core cable of multistranded copper conductor of size 1.5 sqmm as phase & neutral drawn in and including PVC conduit medium grade not less than 20 mm dia, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling alongwith 1.5 sqmm stranded PVC insulated FRLS unsheathed copper conductor(Green in color) as earth wire and connected to common earth dolly for the following incl making good to surface with CM(1:4) plaster and paint to match the surface complete incl provn of CI/pressed steel terminal switch box and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc complete all as specified and directed for controlled by one switch one light/fan point

All as per item No 104.00 above but for one light point two way

All as per item No 104.00 above but for one bell point on independent board controlled by one 5 Amps bell switch.

All as per item No 104.00 above but for One 5 pin 5 amps socket outlet on same board with cables of size 1.5 sqmm.

All as per item No 104.00 above but for One 5 pin 5 amps socket outlet on independent board with cables of size 2.5 sqmm.

All as per item No 104.00 above but for One 6 pin 15/16 amps socket outlet on independent board with cables of size 2.5 sqmm.

All as per item No 104.00 above but for on independent board with cables of size 4 sqmm (for AC/geyser point) complete.

S&F Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed.

S&F Switch Piano Flush button single pole two way 5 Amp complete all as specified and directed.

S&F Bell Push Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed

S&F socket outlet flush type 3/5 pin 5/6 Amps 230V AC all as specified and directed.

S&F switch piano flush single pole one way 15/16 Amps all as specified and directed.

S&F socket outlet flush type 5/6 pin 15 Amps 230V AC all as specified and directed.

M&L for ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and directed.

M&L for stepped type electronic fan regulator flush type complete all as specified and directed.

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F calling bell ding dong AC 230 volts single pole complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing wall bracket light fancy type suitable for B-22 base holder incl 10W LED bulb complete all as specified and directed.

S&F MCB DB SPN 8 way with 200 amps 240 volts rated copper busbar in sheet steel enclosure.double door type complete all as specified and directed.

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Taking down Fan of any type (Ceiling Fan or Wall Fan), sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed. Note:- The contractor shall deposit the existing fan to store yard of AGE E/M old cantt. Quoted rates shall deemed to be included for taking down and transportation of the fans and the fans will be disposed off as per policy in vogue.

Refixing old ceiling fan in same or other location as directed incl electric connection with wire 3 core 23/.0076 copper conductor complete all as specified and directed.

Refixing of old wall fan in same or other location as directed incl electric connection with wire 3 core 23/.0076 copper conductor complete all as specified and directed.

Taking down old/existing geyser from site including disconnection of all the water and electric connections and refixing in same or other location as directed, reconnection of its electric and water connections incl new PVC connections complete all as specified and directed. Note:-The contractor shall deposit the existing geyser to store yard of AGE E/M old cantt and recollect them for refixing at site. Quoted rates shall deemed to be included for the nut-bolts, washers, fastners and transportation.

Supply and fixing LED bldg light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Disconnecting and taking out old unserviceable submain wiring and S&F sub main wiring with two single core FRLS PVC insulated,unsheathed, multistranded copper conductor cable 6 Sqmm with one single core 6 Sqmm FRLS PVC insulated, unsheathed, stranded copper conductor cable as earth wire in and including PVC conduit(HMS), duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling and earth wire connected to common earth point complete all as specified & directed. Note :- Two runs of 6 sqmm as submain wire, one run of 6 sqmm earth wire and one run of PVC conduit shall be measured one RM

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl & GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl 20mm GI light grade protection pipe GI pipe watering medium grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed. Note :- Rate for GI earth wire and protection pipe upto 7.5mtr are inclussived in rate to be quoted against this item.

M/S J J ENTERPRISES (BID ID -3137484)

M/S A P CONSTRUCTION (BID ID -3130141)

Channa Brothers and Co. (BID ID -3143722)

M/s DHARAM VIR GHAI (BID ID -3137085)