PURCHASE OF SUBMERSICBL TUBEWELL PUMP, PIPE AND STEEL GRIL ETC

SProviding laying and jointing of following galvanized Iron (MS) Pipes With specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 part II. 50 mm Dia. G.I.class medium

providing & Fixing Following check ( Non Return) Valves Class II Conforming to IS 778/1984 (reaffirmed 2005) Female ends, tested to 21.09 kg/sq.cm. 50 mm dia.(Flanged)

Providing And Fixing gate (full way) valves tested to 300Ibs/sq.inch or 21.0 kg/sq.cm. Conforming to IS 778/1984 (Reaffirmed 2005) class-II 50 mm dia.(Flanged)

Providing and Jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes & heavy duty scokets and jointing materials all complete. pipes and sockets confirming to IS:1239-2011 part-II. 50 mm dia, class medium with heavy duty seamless sockets.

Supplying& Installation of enrgy Efficiant five star Bee rating isi Marked required capacity of Three phase, 50HZ, 415V, deep-well submersible pump Steel body, suitable for 6” tube Well with control Panel Starter suitable for Submersible pump with dry run proection (Auto cut-ofl), single phase preventer, connections including clamps, bore cap, flat cable of length equals to maximum head of the pump plus 5 metres etc. as required as per specifications. 10 H.p. with 20 stages, tlead Mt. 184-80 discharge LP M 60-270

fencing on top floor of octagonal watch tower :-Providing and fixing of factory make fixed louvers fabricated from roll formed section made of galvanized pre - painted steel with epoxy primer of 5-7 microns thick finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick, colour coated/powder coated (base steel as per IS 513 ‘ D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) section for external frame 33 X 58 x0.58mm, glass holding flanges made of polypropylene, sections are to be cut to length, miter joined with corner bracket. the above frames should be fixed to the concrete/ masonry walls by means of self-expanding screws. Including filling the gap upto 5 mn depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod ofapproved quality as per architectural drawings and direction of Engineer-in-charge complete. (glazing shall be paid separately as per SOR rate). (3.60M+2.60M+3.70M+2.60M+3.70M+2.45M+3.60M+2.55M)× (1.80M+1.60M+1.50M)/3 =

INDIAN SALES AGENCY