Repair and maintenance work arrangements at Door no 50,50/2,50/3,50/6 in thamukkam main road in ward 31

Amount

Painting old wall surface with two coats of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soap soda and water by manual labour.

Painting One coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply and Fixing for CPVC Pipe and Specials - 32mm CPVC Pipe

32mm CPVC Coupler

32mm CPVC Tee

32mm CPVC Bend

32mm NRV

32mm Gate Valve

CP Wall Mixture Tap 3 in 1 system with Hand Showers

CP Two Way Bib Cock with Health Faucet

Supply and Fixing for 45 Cm Round Convex Mirror including cost of stand, labour charges for fixing etc., complete as per standard specification

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints.The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.

Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities Upto 3 HP

Supply and delivery of PVC insulated and sheathed 3.00 Core Flat Type 4.00 sq mm copper cable conforming to IS 694/1990 suitable for submersible pump set of Standard Specification

Roofing with Galvanised Coruugated Iron Sheet of 0.8mm thickness - 10 m2

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Providing for Medium Density Fibre (MDF) Board - Exterior Grade - both sides pre-laminated, 12mm thick etc Complete

Labour wrought and put up in position Shutters for windows ledged and braced and planked doors including labour charges for fixing furniture fittings complying with standard drawings and standard specification

Supply and fixing of Single PHASE UPS (Single Phase In & Single Phase Out) 2KVA CAPACITY - SYSTEM WITH BATTERY - 2 HOUR BACKUP

Supplying and fixing in position of Alu.Anodised Partition with 62 x 38 x 2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips. rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill titheextent required and made good to the original condition safter fixing as directed by the departmental officers.All the Aluminium sections should beanodised to 1.5 microns as per ISI

Add GST 18%

C SATHIYASEELAN (BID ID -1447741)