A. Providing vitrified tiles in Lab (F-17) in CPMB and Lab of Plant Ecology and Environmental Science Lab in main building at NBRI, Lucknow.

Amount

Dismantling of existing wooden door shutter including refixing after laying of vitrified tile floor including cutting of door, making in size etc. complete.

Dismantling of existing aluminium glazed shutter including making in size by cutting of aluminium vertical member and partical board/ galss, change of rubber gasket and refixing after laying of vitrified tile floor complete.

Dismantling of existing cupboard shutter of size 400mm x 750mm and refixing the same including cutting and making in size after tile flooring including providing teak wood lipping at bottom of shutter and replacement of hinges wherever required etc. complete.

Dismantling of existing Mosaic flooring and skirting including removal of unserviceable material up to dumping ground within a lead of 50 mtr. as directed.

Chiselling/Tacking of floor at reqd. interval for making rough for proper bonding with of tiling including disposal of rubbish up to dumping ground with in 50m lead as directed.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ Sqm.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm .

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Supply, fabrication and installation of wall mounted wooden storage rack of size 2420x600mm and 400mm deep having one horizontal shelves with 19mm commercial board Century/Orchid or eqvt. make finished with laminate 1mm thick Merino/Greenland/Century or eqvt. make on exposed outer surface except back. The back of the rack will be commercial ply 12mm thick Century/Orchid or eqvt. make. The front of the rack will be side hunged openable shutter having teak wood lipping 19x6mm on edges duly polished complete . The inner surface will be painted with enamel paint of approved colourand shade over one coat of wood primer complete. The job includes all locking arrangement, parliamentary hinges S/S handle, wooden knob. The job will be completed to intier satisfaction of Officer In-Charge (front area of the rack will be measured for payment).

Supply, Fabrication & fixing in position wooden cupboard shutter under working platform made out of commercial board 19mm CENTURY/GREEN PLY or eqvt. make fixed/ screwed in proper position divided in Three vertical part and each parts will have one double leaf & one Single leaf side hung hinged shutters with IInd class teak wood leaping 19x6mm on edges. The one no horizontal shelf with same board will also be provided in the middle. The front will have laminate with 1.00mm thick mica Marino/IPL/Green Lam or eqvt. make and inner exposed face will be painted with enamel paint two or more coat over one coat of wood primer. The job includes MP lock, parliamentary hinges, S/S handle, Ball Catcher etc. complete. The job will be completed to entire satisfaction of Engineer-Incharge.

Providing and fixing 100 mm vertical blinds Vista or eqvt. make in approved colour pattern and shade including chord, weight, loop chain ahd installation complete

Repair/renovation of existing wooden working table including change of telescopic channel (04 Nos, change of SS handle (04 Nos) and necessary repair for smooth functioning of drawer. The job also includes polishing of exterior surface with French sprite polish complete.

Repair/replacement of wornout PVC flooring (in patches upto total area 5.00 Sqm approx.) in matching shade including necessary adhesive etc. complete.

Labour charges for shifting of lab furniture’s such as Instruments/working table, chairs, steel almiras and other lab materials during execution tiling work carefully and replacing the same after completion of the work.

Note:- Rates should be quoted inclusive of all Taxes, GST etc.

M/S GRAFH ENGINEERS

Moira Interiors Pvt.Ltd.

Manju Shree Traders