Renovation of electrical installations in toilets at technology block, ACD, Systems, SID, SED, CSMST, Graphic Arts, Main Guest house buildings and ladies toilets for HLS staff at CSIR-NAL Kodihalli, Bengaluru-560017

Amount

Supply of 18 W, LED cool day white surface mounting square panel luminaries with high efficient LED & glare free opal diffuser having IP 20 protection luminaries with CRCA / aluminum housing enclosure including control electronic gear etc. all complete and suitable for operation on 230V, 50 Hz, AC power supply as required.

Supply of 22 W, LED cool day white surface mounting square panel luminaries with high efficient LED & glare free opal diffuser having IP 20 protection luminaries with CRCA / aluminum housing enclosure including control electronic gear etc. all complete and suitable for operation on 230V, 50 Hz, AC power supply as required.

Supply of surface / pendent mounted LED flat panel of 36/40W, 4'x1' feet cool day light having IP-20. The luminaire shall be lumen output 3275 lm, colour temprature 6500k,high efficiency OPAL diffuser (OD) transitivity > 87%, constant control electronic gear, PF > 0 .9 efficiency > 85% THD < 25% with CRCA front frame with high efficiency glare free opal diffuser and extruded aluminum housing, pre-coated white colour etc,. and ready for operation on 230V, 50 Hz, AC power supply.

Supply, installation, testing & commissioning of 25 liter, 2 kW, smart advanced water heater. The water heater shall be equipped with Wi-Fi facility for remote switching ON / OF, temparature control, smart control technology, smart bath logic, remote controller, auto diagnosis and eco function facilities using the Racold net app and ready for operation on 230V, 50 Hz ac power supply and ready for operation on 230V, 50 Hz ac power supply all complete as required.

Supply installation testing and commissioning of electrically operated wall mounted fully automatic hand dryer made up of using ABS plastic with modular design for toilet application and suitable for operation on 230V AC supply. The dryer shall be fixed on the wall as directed by the Engineer In -charge with necessary srews / fastners all complete as required

Supply and fixing of 4 way / 4 pole metal enclosure suitable for fixing of SPN MCBs on surface / recess on the wall and match with surrounndings as required

Supply and fixing of 3way / 3 pole metal enclosure suitable for fixing of SPN MCBs on surface / recess on the wall and match with surrounndings as required

Supply, installation, testing and commissioning of 50W, 230V, 50 Hz,1250 rpm, modular having PVC body type exhaust fan of size 250mm x 250mm. The exhaust fan shall be provided with built in shutter and shall be installed on existing UPVC ventilator / window using necessary fastners etc,. all complete as required.

Supply of 300 mm sweep 900 RPM medium duty exhaust fan suitable to operate on 230 V, 50 Hz AC supply etc,. all complete e as required.

Supply of 380 mm sweep 900 RPM medium duty exhaust fan suitable to operate on 230 V, 50 Hz AC supply etc,. all complete as required.

Supply of 450 mm sweep 900 RPM medium duty exhaust fan suitable to operate on 230 V, 50 Hz AC supply etc,. all complete as required.

Supply of louvers / shutters made out of sheet steel including necessary painting suitable for 300 mm sweep medium duty exhaust fans as required.

Supply of louvers / shutters made out of sheet steel including necessay painting suitable for 380 mm sweep medium duty exhaust fans as required.

Supply of louvers / shutters made out of sheet steel including necessary pauiting suitable for 450 mm sweep medium duty exhaust fans as required.

Suppply and fixing of 32X12.5 mm mini DLP trunking with flexible cover on surface including fasteners as required.

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor cable in surface / recessed PVC conduit / casing capping, with modular switch, modular plate, suitable G.I / PVC box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor cable etc. as required. (Group C) Note: More than one light / fan / exhaust fan controls located at one place, the necessary modules may be used as against single PVC surface box and controls each point shall be individual with all other accessories as required.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.(Group C)

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and drawing following sizes of FRLS PVC insulated copper conductor cable in the existing surface / recessed steel / PVC conduit / trunking / cable tray as required

1 x 1.5 sq. mm

2 x 2.5 sq. mm

2 x 4 sq.mm

Supplying and fixing of following sizes of heavy duty 2mm thick PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6 A switch

15 / 16 A switch

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required

1 or 2 Module (75mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including supply and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / LED fittings / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc all complete as required.

Making hole for installation of exhaust fan of size upto 450 mm sweep by demolishing brick work manually/by mechanical means including disposal of malba within 50 meter lead and making good the wall by plastering etc. as required. Rates taken from (DSR Civil-2019,Vol-II Item no. 15.7.4 and 13.1.2) from Civil DSR

Installation upto 450 mm sweep exhaust fan in the existing opening, including connection, testing, commissioning etc all complete as required.

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of sizes upto 450 mm as required.

SRI RAJARAJESHWARI ELECTRICALS

Classic Electricals

SRS ELECTRICALS

S P ELECTRICAL INDUSTRIES

SUPRABHA ELECTRICALS