REPAIR TO SANITARY FITTING JOINERY AND OTHER CONNECTED MISC WORKS AT AF STN MOUNT ABU

Amount

Taking down chowkhats or frame n exc 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 & n.exc. 6 sqm in each complete all as specified & directed.

S&F 30 mm thick flush shutters, solid core construction with block board core and ply wood face panels commercial type on both side including both face with decorative face veneer with lapping Exposed edges of shutter to be provided with 6mm thick teak wood lipping. The thick ness of lipping shall be 12mm for sides on which hinges are to be provided complete all as specified and directed.

S&F Solid PVC Double door frame of size Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F 30mm thick glazed and skelten shutter open rebated and prerepair to receive glass, gauge etc with sash bars, edge of framing, plain/chamfered or rounded, fitted with cut and metered beads with second class hard wood complete all as specified and directed.

S&F aluminium anodised frame for doors, windows, partitions powder coated (min thickness 50 microns) complete all as specifed and directed.

M&L for powder coated anodised aluminium sliding window any Size in three track of size 63.50 x 38.5 x 1.8 mm thick fixed on a powder coated Aluminium frame of size 63.5 x 46 x 1.2 mm with Stainless steel wire mesh of 0.36 mm dia with aperture of 1.40mm fixed with aluminium F chanel including provision of 5.0 mm thick tinted glass fixed with powder coated aluminium snap and rubber beading complete all as specified and directed. Note. (a) Aluminium anodised spring to be locking device 02 Nos of 100 mm long in each window. (b) Aluminium eye hook/stopper in each leaf. (c) Two sliding shutters of glass and one sliding shutter of SS wire mesh.

S&F Aluminium anodised powder coated window shutter or partition, fixed type without sash bar, alumn section section weighing 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed.

S&F Aluminium doors shutters air tight with natural anodized alunimium frame with on or more rebate partly glazed and partly panelled of with hollow profile PVC panelling of thickness 12mm (all aluminium member Top, bootom, vertical & middle of shutter made of size 82.55x44.45x1.80mm thick including necessary jointing cleats, glazing clips, 5mm thick tinted glass, rubber packing with anodized aluminium beading /glazing clip size 19.00x17.30x0.70mm, wt 0.097 Kg/RM of both side and fixing aluminium fittings i.e aluminium hinges 100mm three numbers, handles 200mm long two numbers, tower bolts 150mm two numbers and mortic lock with 06 lever fitting shoiuld be ISI marked complete in all respect as engr-in-Charge. (Rates will also include making good floor /wall jambs of doors/ windows surface with plaster and match with existing finishes) Make of aluminium : hindalco, Jindal, Indalco.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed.

S&F tinted glass pane 5.0mm thick area of each pane exc 0.5 sqm fixed with beads and metal clips/pins

S&F powder coated aluminium anodized grill of 6/7 mm dia rod square, rectangular, circular or similar type of shape, fixed with channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 150 mm aluminium anodised handles cast type complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 100mm stainless steel butt hinges medium weight complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

M & L preparing new wood & wood based surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, exc 10 cm width or girth complete all as specified and directed.

S&F in repair vitreous china EWC with 10 litre capacity flush tank (Twin flush) monolathic with WC, coloured including coloured PVC hydraulic seat cover fixing bolt, necessary cutting diversion, opening in wall & floor etc complete as directed of approved/ standard quality complete all as specified and directed.

Supply and fixing in repair vetrious china wash hand basin, white flate back size 550 mm X 400 mm including cutting for and pinning in ends of barakets or erecting stand complete all as specified and directed.

S&F in repair solid PVC Wall Lining consisting of 5mm thick coloued printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed.

M & L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) as levelling course.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed cement mortar in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S&F in repair vitreous China wash down water closet (EWC) pedestal pattern coloured incl P or ‘S’ trap coloured ,seat cover & cement concrete bedding complete all as specified and directed

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 630 x 450 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, excluding 32 mm dia. PVC flushing pipe complete all as specified and directed.

S & F in repair grating doom 100 mm dia of PTMT (minimum weight 25gms ) complete all as specified and directed.

S & F PVC 75 mm dia floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in Repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed.

S&F in Repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in wall complete all as specified and directed.

M&L 110 mm cement concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports complete all as specified and directed

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed.

S&F PVC (SWR) junction single, equal or unequal 110mm dia complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints laid in trenches complete all as specified and directed.

S & F 75 mm PVC (SWR) bends any radius complete all as specified and directed.

Haritwal traders (BID ID -3162177)