PROVISION OF CONNECTING PATH WAY NEAR BLDG No T 115 T 116 TOILET FACILITIES AT Bldg No P 137 COMPOUND WALL ADJACENT TO CIVIL RE AT BLOCK No P 9 P 10 ADDN ALTN TO MAIN ENTRANCE GATE AND PARKING SHED WITH HARDSTANDING UNDER GE N BNG

Amount

(B/R PORTION)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard / dense soil, all as specified and directed.

Spreading and leveling of earth, well ramming, including watering as required in layers not exceeding 25 cm thick all as specified and directed.

Material and labour for Hardcore with broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Excavating in post holes(or similar holes) each n exc .5 cum getting out in Hard / Dense soil soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm etc complete all as specified and as directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sq m on plan and not exceeding 1.5m depth in hard / dense soil etc complete all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sq m on plan and not exceeding 1.5m depth in Soft / loose soil etc complete all as specified and directed

Returning, filing in, excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed

Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Material and labour for Plain Cement Concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in surface channels and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

Cutting into existing manholes for connecting new drains ,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) and finishing the surfaces smooth and reforming benching as required for 160 mm bore pipe.

Material and labour for, Pre-cast Reinforced Cement Concrete, (1:2:4), type B1 using 20 mm graded stone aggregates as in cover slabs of manholes, gully traps, drains, etc., set in CM(1:4) complete all as specified and as directed. NOTE :- Steel for Reinforcement will be measured and paid separately.

Material and labour for Reinforced Cement Concrete M25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete M25 (Design Mix) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete M25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete M25 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum average compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks not exceeding 10 cm in width, having minimum average compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour, for Plain cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in chajjas, coping, padding concrete, etc complete all as specified and directed.

Cutting chases, pinning in, where required for concealed conduit wiring, and making good disturbed surfaces to match with adjacent surfaces including pointing in cement mortar 1:3, girth not exceeding 15 cm on brick / PCC block masonry / concrete surfaces, complete all as specified and as directed.

Material and labour, for use and waste of formwork to flat surfaces / sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, finishing the surfaces rough complete all as specified and directed.

Material and labour, for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)finishing the surfaces rough complete all as specified and directed.

Material and labour, for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. finishing the surfaces rough complete all as specified and directed.

Material and labour, for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

Material and labour for, broken glass copings with 25 mm thick rendering in CM (1:3) with rounded or weathered finish, using broken glass of bottle or thick glass of 63 mm thick gauge embedded firmly in the mortar @ 4 Kg of glass per Sq m of rendering surfaces keeping jogged edges of the glass projecting on top of compound wall complete all as specified and directed

Material and labour for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with mild steel screw & bolts all as specified and as directed.

Supply and fix 200 mm Aluminium anodized barrel tower bolts of extruded section complete all as specified

Supply and fix, Stainless steel Butt hinges, 100 mm long fixed with screws complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and as directed

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and as directed

Material and labour for powder Coated aluminium frames (minimum thickness of powder coating 50 microns) and fabricating of doors, windows, ventilators and fixed partitions with one or more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc. complete all as specified and as directed. Note :- i) For payment purpose, weight of aluminium section only shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate and nothing extra will be measured and paid,, iii) Supply and fixing of Sheet glass and wire gauge shall be measured and paid for separately under respective items.

Supply and fix powder coated aluminium window and ventilator shutters, side hung type / sliding type, without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) per shutter complete all as specified. Note :- Sheet glass and wire gauge shall be measured and paid for separately under respective items.

Material and labour for providing water proofing treatment for RCC roof slab surfaces, with and including cement plaster 10 mm thick and providing screed bed/rendering 10mm thick in CM (1:3) mixed with water proofing compound as per manufacturers instructions after removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sq m reinforced with non woven polyester/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litre/Sq m and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 liter/sq m complete all as specified and directed.

Material and labour, for rolled mild steel sections as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; necessary drilling, bolting or riveting, etc., and similar work, conforming to Fe 290 (Grade E-265), complete all as specified and as directed by the Engineer-in-Charge.

Supply, fabrication and fixing of mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240complete all as specified and as directed.

Supply, fabrication and fixing of mild steel work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and labour, steel reinforcement using TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) and not less than 0.9 mm dia complete all as specified and as directed.

Material and labour, steel reinforcement using TMT bars of 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) and not less than 0.9 mm dia complete all as specified and as directed.

Material and labour, steel reinforcement using TMT bars as in stirrups / spacers / binders, etc., of 8 to 10 mm dia, cut to length, bent to shape required, including cranking, bending and binding with mild steel wire (annealed) and not less than 0.9 mm dia complete all as specified and as directed.

Supply and fixing Galvanized punched type Concertina Coil with 80 spiral turns in each 9 m of recommended stretched (laid) length & 600 mm effective dia (after laying) with central core wire high tensile galvanized spring core wire (HTGS) made up of 2.6 mm dia as per IS: 4454, Part-1, Grade-II having minimum galvanizing of 230 – 250 grams per sq m, with a tape of razor sharp barbs strip of 0.5 mm thick and 19 mm width conforming to IS: 513 DD, barbs punched along the length at regular interval of 120 barbs per running meter, crimped with 4 to 5 Nos. of clips per each spire made up of Stainless Steel (SS-304) including fixing of concertina coil on support fixed through out the compound wall with the help of required u-nails / split pin, scaffolding etc; complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Galvanized. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc ., complete all as specified and as directed Note :- Each line wire to be measured

Supply and fix, Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Supply and fix, Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding / ridge / valley to wall, fixed with self tapping screws all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:4:8), type D2, using 40 mm graded stone aggregates as in pavings / sub-bases laid in panels, finishing the surfaces even and fair complete all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:3:6), type C1, using 20 mm graded stone aggregates as in paving / plinth protection, laid in panels, including joint filling with sealing compound grade 'A', finishing the surfaces even and fair complete all as specified and as directed.

Material and labour for, 25 mm thick, Plain Cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in floorings, with surfaces, finished even and fair complete all as specified and as directed

Material and labour, for non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour, for coloured Glazed ceramic printed tiles, of size 450 x 300 x 6-7 mm thick (Grade B-IIA) as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in epoxy grout to match with the colour of tiles, laid over and including provision of backing coat of 10 mm thick rendering in CM 1:3, complete all as specified and directed.

Material and labour, for 18 to 20 mm thick Granite stone slab work (of any type), table rubbed and mirror polished), as in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, laid over and including screed bed or bedding layer of 10 mm thick in CM (1:3), complete all as specified and as directed.

Material and labour, for exterior grade, coloured glossy finished rubber pressed, plain cement concrete chequered tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floor including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed..

Material and labour for, Rubber moulded pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments, laid over and including 50 mm thick M Sand cushioning etc complete all as specified and as directed.

Material and labour for, rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement complete all as specified and as directed

Material and labour for, rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement complete all as specified and as directed. Note :- Supply only WPC will be measured and paid separately

Supply only liquid water proofing compound complete all as specified and as directed

Material and labour for, rendering 5 mm thick on ceiling / RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement complete all as specified and as directed.

Supply and fix, 0.60 mm thick Titanium stainless steel gold coated letters of size 45 cm height, bright polished, including drilling on granite surfaces and fixed in position with grouting adhesive complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Figured glass, 4 mm thick, pin head glass and glazing with oil putty and necessary clips as square not exceeding 0.5 sq. m in each pane all as specified and as directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Preparing newly plastered wall surfaces and applying three coat of white wash complete all as specified & as directed.

Preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.

Preparation of new steel surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Supply and fixing new CPVC pipes, outer dia 20 mm, SDR 11 Plain with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.

Supply and fixing new CPVC pipes, outer dia 25 mm, SDR 11 Plain with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.

Supply and fix, Vitreous china snow white, wash hand basin of size 550 mm x 400 mm excluding chain and plug and porcelain stopper including brackets, supply and fixing of 32 mm dia, PVC corrugated / flexible waste pipe, 800 mm long and with brass waste coupling of 32 mm dia, complete all as specified and as directed. Make : CERA, Cat No S2040103 or techno commercial equivalent in other makes, complete all as specified and as directed.

Supply and fix, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, flushing pipe, anti syphonic pipe etc complete, all as per Make : Cera, Cat No S3010102 of CALINA make or techno commercially equivalent in other makes specified here-in-after.

Supply and fix, PVC valve less, syphonic action type, flushing cistern, Duo Flush cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, complete all as specified and directed. (Cat No-502 of Prayag or equivalent in any approved make as in CA)

Supply and fix, vitreous China urinals, bowl type, white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with brackets, flush pipe, grating and Union for discharge pipe, waste coupling, etc., complete all as per Make: Cera, cat No. S4020103 of CHRYS make or techno commercially equivalent in other makes specified and as directed.

Supply and fixing, 50 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.

Supply and fixing, 25 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.

Supply and fix, 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No PIS-14H Neptune series of Prayag or equivalent make as specified here-in-after)

Supply and fix, 15 mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-10H Neptune series of Prayag or equivalent make as specified here-in-after)

Supply and fix, Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed all as specified and as directed. (Cat No BEA-34 of Prayag or equivalent make as specified here-in-after).

Supply and fix, Chromium plated bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-06H Neptune series of Prayag or equivalent make as specified here-in-after).

Supply and fix Mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed

Supply and fix, PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

Supply and fix PVC (SWR) PVC multi floor trap 75 mm dia outlet with CP grating, including jointing with solvent cement complete all as specified and as directed.

Supply and fix, PVC(SWR) Gully trap 125 / 110 mm dia outlet, including jointing with solvent cement complete all as specified and as directed.

Supply and fix, grating doom 100 mm dia of PTMT (Minimum weight 25 grams) complete all as specified and as directed

Supply and fixing Rotational moulded polyethylene water storage tanks (double layered) of 1000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix, 20 mm dia float ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 grams) complete all as specified and as directed.

Supply and fix, gun metal, globe or gate valves 25 mm bore (ISI marked) with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Material and labour, for Plain Concrete bed to 150 / 160 mm bore drain pipe including packing under and haunching against the sides of pipes, after they are laid and tested, with plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) complete all as specified and as directed. Note : Supply and laying pipes will be measured and paid for separately under respective items.

Material and labour, for PVC (SWR) pipes (conforming to IS 15328) of 150 mm internal dia, foam core, self fit, with rubber ring joint, 0.4 M pa (class 2) with pressure rating @ 4 Kg / Sq cm, laid in trenches and jointed including bends, elbows, etc., complete all as specified and as directed.

Supply and fix, PVC (SWR) pipes 110 mm dia, type B (Conforming to IS 13592), single socketed in any length with rubber ring joints laid under floor or trenches, complete all as specified and as directed.

Supply and fix, PVC (SWR) pipes 75 mm dia, type B (Conforming to IS 13592), single socketed in any length with rubber ring joints laid under floor or trenches, complete all as specified and as directed.

Supply and fix, PVC (SWR) pipes 110 mm dia, type B (Conforming to IS 13592), single socketed in any length with rubber ring joints fixed on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

Supply and fix, PVC (SWR) pipes 75 mm dia, type B (Conforming to IS 13592), single socketed in any length with rubber ring joints laid on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

Supply and fix, PVC (SWR) bends any radius 75 mm dia with access door, fixed in pipes, complete all as specified and as directed.

Supply and fix, PVC (SWR) bends any radius 110 mm dia with access door, fixed in pipes, complete all as specified and as directed.

Supply and fix, PVC (SWR) branch piece single Y equal or unequal 75mm dia with access door, all as specified and as directed.

Supply and fix, PVC (SWR) branch piece single Y equal or unequal 110 mm dia with access door, all as specified and as directed.

Supply and Fix, 110 mm dia PVC(SWR) vent cowl

(E/M PORTION)

Material and labour for Point Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metallic rigid PVC conduit medium grade ISI marked including accessories concealed in walls including MS terminal boxes fabricated with 1.6 mm thick MS sheet, covering with laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing modular switches, switch socket outlets, fan regulators etc., including provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for One light point controlled by one switch / One fan point controlled by one switch/regulator / one bell/buzzer point controlled by bell push

All as per Serial Item No 2.001 here-in-above, but for one 3 pin socket outlet 5 Amps on independent board.

All as per Serial Item No 2.001 here-in-above, but for one 3 pin socket outlet 5 Amps on Same Board.

All as per Serial Item No 2.001 here-in-above, but with 2.5 Sq mm cable and earth continuity conductor of 2.5 Sq mm

Supply and fix, Modular Switch, One module, One way, 6 Amps, 240 Volts all as specified and as directed.

Supply and fix, Modular Switch, One module, One way, 5/16 Amps, 240 Volts all as specified and as directed.

Supply and fix, Modular socket, 6 Amps, 5 pin combined, 2 module, 240 Volts all as specified and as directed.

Supply and fix, Modular socket outlet, 2 Module, 6 pin, 6/16 Amps (multi purpose), complete all as specified and directed.

Material and labour for, XLPE insulated cable, screened, bedded galvanized steel strip/wire armoured heavy duty with aluminium conductor of cross sectional area 25 Sq mm 3.5 core with cable protection works (as applicable) laid in trenches / ducts / fixed on pole / wall / laid under road / path / culvert / drains / encased in pipe, including necessary lugs, jointing and testing complete all as specified and as directed.

Material and labour for, XLPE insulated cable, screened, bedded galvanized steel strip / wire armoured heavy duty with aluminium conductor of cross sectional area 16 Sq mm 4 core with cable protection works (as applicable) laid in trenches / ducts / fixed on pole / wall / laid under road / path / culvert / drains / encased in pipe, including necessary lugs, jointing and testing complete all as specified and as directed.

Material and labour for, XLPE insulated cable, screened, bedded galvanized steel strip/wire armoured heavy duty with aluminium conductor of cross sectional area 25 Sq mm 2 core with cable protection works (as applicable) laid in trenches / ducts / fixed on pole / wall / laid under road / path / culvert / drains / encased in pipe, including necessary lugs, jointing and testing complete all as specified and as directed.

Material and labour for, River Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. Note : Only punned thickness will be measured for payment.

Material and labour for laying of burnt bricks sub class `B’ bricks of size 230 x 115 x 75 mm, laid in trenches for cable protection all as directed and specified

Taking down old MCBDB, Supply and fix, MCB DB SPN 8 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated, IP-42 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items.

Supply and fix, MCB SP, 240 volts, 6 to 32 Amps, 50 Hz, 10 KA breaking capacity, 'C' Series, using copper lugs for terminations, complete all as specified and as directed.

Supply and fix, MCB SPN, 240 volts, 32 to 40 Amps, 50 Hz, 10 KA breaking capacity, 'C' Series, using copper lugs for terminations, complete all as specified and as directed.

Supply and fix 35 W, LED security light fittings with lamp 35 W with high lumen output, environmental friendly, energy efficient LED, with pressure die cast housing with toughened glass and high power LEDs with secondary optics, with lamps and accessories, IP 66 protection, system electrical efficiency > 85%, system efficacy > 110 IP/W, 10 KV SPD, operating voltage between 140 - 270 V, AC, 50 Hz, TDH, 10%, power factor ≥ 0.95, surge protection 2.5 kV, colour temperature 5700 K, CRI > 80, integral drivers, connecting to loop boxes electrically, light fitting conforming to Cat No BREP 25 W LED WH of Bajaj or techno commercially equivalent approved model complete with all accessories and lamp complete all specified and as directed.

Supply and fix 70 W, LED security light fittings with lamp 70 W with high lumen output, environmental friendly, energy efficient LED, with pressure die cast housing with toughened glass and high power LEDs with secondary optics, with lamps and accessories, IP 66 protection, system electrical efficiency > 85%, system efficacy > 110 IP/W, 10 KV SPD, operating voltage between 140 - 270 V, AC, 50 Hz, TDH, 10%, power factor ≥ 0.95, surge protection 2.5 kV, colour temperature 5700 K, CRI > 80, integral drivers, connecting to loop boxes electrically, light fitting conforming Make : Havells / Bajaji / Cromptron or techno commercially equivalent approved model complete with all accessories and lamp complete all specified and as directed.

Supply and fix, Ceiling rose surface type, Bakelite, 65 x 50 mm ISI marked with three terminals all as specified and as directed.

Supply and fix, wall mounted LED batten, energy efficient, 20 Watt, 4 feet, with high lumen output of 2000 lumens and diffuser should be High translucent serrated milky white, environmental friendly, energy efficient LED, with accessories, IP 20 protection Class I, system electrical efficiency > 85%, system efficacy > =100 lm/W, operating voltage between 140 - 270 V, AC, 50 Hz, TDH <20%, power factor ≥ 0.90, surge protection 2.5 kV, colour temperature 5700 K, CRI > 80 & integrated electronic driver 20 W fitting prewired and connecting with 3 Core, 1 sq mm sheathed copper flexible cable complete in all respects all a directed by Engineer-in-charge. Cat Part No LHEWEBP6IN1W020 of Havells or techno commercially equivalent makes specified here-in-after complete all as specified.

Supply and fix new Exhaust fan with louvers, 300 mm sweep, energy efficient suitable to function on 230V, single phase, AC supply, including provision of 3 core flexible copper wire, 24/ 0.20 sq mm, writing MES No complete all as specified and directed. Cat Part No 70079 MAXX AIR of Bajaj or techno commercial makes approved here-in-after.

Material and labour for, earthing complete with Galvanized Iron earth plate electrode 600 mm x 600 mm x 6 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 40 mm bore light grade GI pipe for watering funnel wire mesh, PCC chamber in CC (1:3:6), type C1 , manhole cover with RCC (1:2:4), type B1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both ways for cover and MS frame etc., complete all as specified and as directed NOTE :- Earth pit shall be constructed at least 0.5 metre away from each earth chamber.

Supply and fixing,replacement of moulded (FRP) junction box with IP 65 protection of size 300x200x80mm with 32 Amp 4 way heavy duty terminal block with 6Amp MCB SP and two number of cable entry gland of standard size with suitable MS bracket complete all as directed

S & L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as requiredof size 32 x 6 mm GI strip

S & F Air termination, single pointed aluminium rod 12mm dia and 300mm long welded on one mtr long Gi pipe light garde 40 mm dia bore fixed to the roof / wall wirth proper grouting arrangement including necessary PCCcoping of size 20cm x20 cm x20 cm including taking down the existing all as specifeid and as directed

S & F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw incl taking down the existing all as specifeid and as directed.

S & L Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground including taking dowm the existing all as specified and as directde

Siddivinayaka Constructions

RAHUL ENTERPRISES

Maydini Constructions Co

Vishwas Enterprises

Atom Engineers and Builders

Gurudut Builders

N BHASKAR REDDY

R R Constructions