Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹39.4 L+₹4.5 L (12.7%)Rejected-Finance BASTI GOVINDPURA SIMBAL MORH MAKHANPUR GOJRAN JAMMU J K 181101 | JAMMU | JAMMU AND KASHMIR | 181101 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹42.1 L+₹7.1 L (20.3%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹43.4 L+₹8.4 L (24.1%)Rejected-Finance DHAMDHA ROAD DURG CHHATTISGARH 491001 | DURG | CHHATTISGARH | 491001 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹47.1 L+₹12.2 L (34.8%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/S Shesh Paul Gupta L5 | M/S VED PAUL MAHAJAN L3 | J P TECHNO L2 | M/S RAJINDER GOODS TRANSPORT CARRIER L1 | M/S SHAKTI STEEL INDUSTRIES L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15 cm thickness (below or above ground level) and removing the rubbish from the work site to out side defence premises complete all as specified and directed | 132.38 | Cum | 250 ₹33,095 | 100 ₹13,238 | 100 ₹13,238 | 45 ₹5,957.1 Lowest | 150 ₹19,857 |
| 2.00 | Dismantling of stone slabs and tiles of any description or thickness in floor, laid, bedded and pointed in any mortar complete all as specified and directed. | 1.4 | Ten Sqm | 120 ₹168 | 50 ₹70 Lowest | 500 ₹700 | 100 ₹140 | 150 ₹210 |
| 3.00 | M&L for granite (Z-Black) work 16 to 18 mm thick, any colour (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 20mm thick screed bed in cement motar 1:4 complete all as specified and directed. | 9 | Sqm | 3,000 ₹27,000 | 3,000 ₹27,000 | 2,500 ₹22,500 | 2,050 ₹18,450 Lowest | 2,700 ₹24,300 |
| 4.00 | M&L for granite (Z-Black) (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. | 5 | Sqm | 3,000 ₹15,000 | 3,000 ₹15,000 | 2,500 ₹12,500 | 2,050 ₹10,250 Lowest | 2,700 ₹13,500 |
| 5.00 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in sub base of floors/pathway/hardstanding, laid in alternate, finished even and fair to receive top finishes complete all as specified and directed . | 100 | Sqm | 250 ₹25,000 | 199 ₹19,900 | 220 ₹22,000 | 150 ₹15,000 Lowest | 222 ₹22,200 |
| 6.00 | M&L for plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in surface channel and drain including necessary form work complete all as specified and directed. | 15 | Cum | 5,000 ₹75,000 | 2,299 ₹34,485 Lowest | 3,500 ₹52,500 | 3,500 ₹52,500 | 4,444 ₹66,660 |
| 7.00 | M&L for plain cement concrete1:2:4, type B 1 (using 20mm graded crushed stone aggregates) as in walls or, retaining walls, any thickness, size or shape including pilasters, buttresses, columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed . | 105 | Cum | 5,000 ₹5,25,000 | 3,566 ₹3,74,430 | 3,700 ₹3,88,500 | 3,500 ₹3,67,500 Lowest | 4,444 ₹4,66,620 |
| 8.00 | M&L for use and waste of form work to sides of concrete foundations, footings, bases of columns , raft and raft beams, sides and softfits (if any) of foundation and plinth beams and similar work, vertical or batter for rough finished surfaces of concrete complete all as specified and directed. | 700 | Sqm | 300 ₹2,10,000 | 190 ₹1,33,000 | 180 ₹1,26,000 | 175 ₹1,22,500 | 170 ₹1,19,000 Lowest |
| 9.00 | M&L for plain cement concrete1:2:4, type B 1 (using 20mm graded crushed stone aggregates) as in surface channels of drains and benching including finishing the top of benching even and fair complete all as specified and directed . | 2 | Cum | 5,000 ₹10,000 | 3,290 ₹6,580 Lowest | 4,500 ₹9,000 | 4,500 ₹9,000 | 4,444 ₹8,888 |
| 10.00 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. | 50 | RM | 100 ₹5,000 | 220 ₹11,000 | 150 ₹7,500 | 55 ₹2,750 Lowest | 88 ₹4,400 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
28 Jul 2025, 6:00 pmClosed
GE SATWARI
GE SATWARI
COMPREHENSIVE REPAIR TO PARKING AREAS,SECURITY WALL, PATHWAYS AND OTHER MISC WORKS AT ZONE-1 AND ZONE-2 OFFRS MD ACCN UNDER AGE B/R-II OF GE SATWARI
2025_MES_717632_1
GEJM-32/2025-26
Open Tender
Civil Works
Works
270 days
GE SATWARI
Class D Cat a (i)
9 documents required · 9 mandatory
₹500
GE SATWARI
₹98,000
Yes
8 Sept 2025
30 Jun 2025
30 Jul 2025
30 Jun 2025
28 Jul 2025
14 Jul 2025
Amount
Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15 cm thickness (below or above ground level) and removing the rubbish from the work site to out side defence premises complete all as specified and directed
Dismantling of stone slabs and tiles of any description or thickness in floor, laid, bedded and pointed in any mortar complete all as specified and directed.
M&L for granite (Z-Black) work 16 to 18 mm thick, any colour (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 20mm thick screed bed in cement motar 1:4 complete all as specified and directed.
M&L for granite (Z-Black) (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in sub base of floors/pathway/hardstanding, laid in alternate, finished even and fair to receive top finishes complete all as specified and directed .
M&L for plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in surface channel and drain including necessary form work complete all as specified and directed.
M&L for plain cement concrete1:2:4, type B 1 (using 20mm graded crushed stone aggregates) as in walls or, retaining walls, any thickness, size or shape including pilasters, buttresses, columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed .
M&L for use and waste of form work to sides of concrete foundations, footings, bases of columns , raft and raft beams, sides and softfits (if any) of foundation and plinth beams and similar work, vertical or batter for rough finished surfaces of concrete complete all as specified and directed.
M&L for plain cement concrete1:2:4, type B 1 (using 20mm graded crushed stone aggregates) as in surface channels of drains and benching including finishing the top of benching even and fair complete all as specified and directed .
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for plain cement concrete 1:2:4 ,type B0(using 12.5mm graded crushed stone aggregates) as in step, seismic and other similar bands, parapets and railing nup to 60 cm heigh, coping, apex stones, bed plates, roof padding and the like including weathering slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided and removing the rubbish from the work site to outside defence premises complete all as specified and directed.
M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate), as in sub base of floors, finished even and fair complete all as specified and directed
M&L for 12 mm thick non skid dura stone coloured digital vitrified joint less tiles (heavy duty parking tiles) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed.
M&L for machine pressed chequered cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigment, set ,jointed and pointed in neat cement slurry as in floors, laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for providing and laying 60 mm thick factory made charmfered edge cement concrete paver block of M-35 grade of approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies, 40mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 including taking down the existing one complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface,surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed.
M&L for rendering 10mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.
Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
All as per Srl item No -23 here-in-before but except bricks complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for preparation of brick/concrete surfaces and applying base coat of SBR based polymer @ 0.3 Kg/Sqm (Berger HS latex plus or equivalent of Asian paints) after drying and applying two coats of two componenet of glass fibre re-inforced polymer modified cementitious water proof slurry mortar (Latex Shield 2K of Berger and or eqvt make of asian paints) @ 1.5 to 1.7 Kg per coat complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described by rubbing with sand paper or grinding by hand grinder to make surface even and smooth & apply primer where required and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered/concrete surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed .
M&L for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion paint over one coat of primer complete all as specified and directed.
M&L for preparation of old decorated plastered /concrete surfaces of walls and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion paint over one coat of wall care putty of 1 mm thick on uneven surface (as and where required) complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of wall care putty 1 mm thick and one coat of primer complete all as specified and directed.
Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided and removing the rubbish from the work site to outside defence premises complete all as specified and directed.
M&L for RCC 1: 2:4 type B-1 (using 20mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete etc complete all as specified and directed .
M&L for RCC 1: 2:4 type B-1 (using 20mm gradded crushed stone aggregates) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed .
M&L for RCC 1: 2:4 type B-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves complete all as specified and directed.
M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc for fair finished surfaces of concrete complete all as specified and directed.
M&L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed .
M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed .
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia,in stirrups, spacers and binders including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work masonry, etc., any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed .
S&F mild steel work such as in angle iron fencing posts, struts and flat iron fillets, gates etc, including drilling hole, punching,splitting ends to secure chain link fencing or fixing of barbed wire to posts including all necessary cutting, welding bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 quality complete all as specified and directed.
S&F mild steel screw bolts having dia of neck 5 mm to 10 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n. exc 5 cm long complete all as specified and directed .
Supply only mild steel galvanized chain link cold dip fencing of aperature 50mm x50mm complete all as specified and directed. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly and contractor shall have no claim on this account.
Fixing only chain link fencing including line wires(steel wire), any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire compete all as specified and directed Note:- Angle iron, flat iron and nuts & bolts shall be measured and paid separately.
Dismantling old barbed wire of any condition & in any position complete all as specified and directed .
S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line wire to be measured) complete all as specified and directed.
All as per Ser item No 49 here-in-before but except barbed wire complete all as specified & directed.
M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
M&L for Framed work as in doors or gates etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing using Fe 290 (Gde-E-165) complete. complete all as specified and directed .
M&L for ready made cast iron decorative crowns welded at top of each vertical box section complete all as specified and directed .
M&L for Mild steel, plain, black sheet 1.25 mm thick in covering to door shutters, steel gates and similar work, cut to size,edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc.as required complete all as specified and directed .
M&L for welding in repairs exc 2.5 cm but n. exc 5.0 cm in length, in metal of thickness exc 6mm but n. exc 9mm in steel gate etc complete all as specified and directed .
M&L Repair to steel gates ( including slot pin, pintol hinge, ball bearing, hook and eye of standarad quality (where required) resecuring of MS plates/sheets and guard bars / grills by using welding equipments complete all as specified and directed.
Dismantling of plain or corrugated steel/fibre glass/AC sheeting, any gauge in roof covering complete all as specified and directed .
Dismantling timber scantlings (framed work) 40 sq.cm and over in section, in any position complete all as specified and directed .
S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290 (Gde E -165) complete all as specified and directed .
S&F mild steel screw bolts (machine made),diameter of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm but n. exc. 30cm long complete all as specified and directed .
S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed
J P TECHNO (BID ID -3364279)
M/S VED PAUL MAHAJAN (BID ID -3374433)
M/S SHAKTI STEEL INDUSTRIES (BID ID -3366434)
M/S Shesh Paul Gupta (BID ID -3366468)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .