REPAIR TO ROOF CEILING EAVES BOARD ETC OF 663 ARMY AVN SQN UNDER AGE I CIF K

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by engineer in charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge. Make : JSW, Tata, or equivalent as approved by AGE I.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge. Make : JSW, Tata, or equivalent as approved by AGE I.

S&FPlain, galvanised, 0.50 mm thick mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed by engineer in charge. Make : JSW, Tata, or equivalent as approved by AGE I.

All as per item No 04 out except sheeting (any thickness) complete all as specified and directed by engineer in charge.

S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type or crancked hook bolts and washers in roofs, walls etc in patches complete all as specified and directed by engineer in charge. Make : JSW, Tata, or equivalent as approved by AGE I.

All as per item No 06 but except sheeting (any thickness) complete all as specified and directed by engineer in charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type including cover fillets, complete all as specified and directed by engineer in charge.

S&F in position suspended false celling system using E Grid suspended celling Grid system. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked, IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof complete all as specified and directed by engineer in charge.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by engineer in charge.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed by engineer in charge.

Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each complete all as specified and directed by engineer in charge.

S&F Mild steel framed works such as grills, framed guard bars, etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by engineer in charge.

M&L for preparing pre-primed steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by engineer in charge.

M&L for Two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth complete all as specified and directed by engineer in charge.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed by engineer in charge.

S&F factory made solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement,complete all as specified and directed by engineer in charge.

S&F Butt hinges medium weight cold rolled mild steel 100mm size complete all as specified and directed by engineer in charge.

S&F chokhats made of angle , flat iron iron structural steel fe 410-0 gde 250 of any descroiption and size including nessasary fixing lugs , hinges etc including one shop coat of primer complete all as specified and directed by engr in charge.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed by engineer in charge.

.-Ditto-all as per item No 20 above but size of frame 125x60mm complete all as specified and directed by engineer in charge.

M&L PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate as in back filling, coping etc complete all as specified and directed by engineer in charge.

S&F 40 mm thick flush shutter solid core construction with block bord core and plywood face panels commercial type both side complete all as specified and directed by engineer in charge.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and directed by engineer in charge.

S&F in repair 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by engineer in charge.

M&L pressed steel frames for cup board chokkat of size 60x40mm with one or more rebates incl necessary fixing hinge, lug, hold fasts etc complete all as specified and directed by engineer in charge.

S&F 16/18 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination incl teack wood liping 6mm thick on sides complete all as specified and directed by engineer in charge.

S&F hasp and staple aluminium anodised, safety type including bolt to hinge plate and fixed with screw of 125mm size complete all as specified and directed by engineer in charge.

S&F extruded aluminium alloy handles,febricated type,anodised of 75mm size complete all as specified and directed by engineer in charge.

S&F Aluminium handles, cast type, anodized 100 mm size comp ISI Marked complete all as specified and directed by engineer in charge.

S&F 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed by engineer in charge.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long complete all as specified and directed by engineer in charge.

S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete all as specified and directed by engineer in charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by engineer in charge.

S&F Galvanized mild steel wire cloth, 0.46 mm noimnal dia or wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staple complete all as specified and directed by engineer in charge.

All as per Srl item No 35 above but fixed in repairs complete all as specified and directed by engineer in charge.

S&F in repairs 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed by engineer in charge.

M&L for Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by engineer in charge. Note:- Credit schedule has been given separately under tender documents and shall be adjusted in general summary by the deptt. for arriving at net contract sum.

M/S SHIMAR STAR GLACIER

M/S B A Traders

M/S Mashkoor Constructions