Construction of Compound Wall to PHC subcenter At Kawadgaon ,Tq.Wadwani Dist,Beed.

Item No. 1 Excavation for foundation in earth. Soils of all types sand, gravel and soft murum including removing the excavated material upto a distance of 50 m. beyond the building area stacking and spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and structting etc. complete.(Lift upto 1.50 Metre) (l.NO.21.02 -P.NO.187)

Item No. 2 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (l.NO.21.40 -P.NO. 192)

Item No. 3 Providing and laying in situ, cement concrete in M-10 of trap/granitc/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer. With crushed sand. ( l.NO.24.01 , P.NO.217 )

Item No.4 Providing and laying in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations ike raft, strip foundations, grillage and footings of R.C.C. columns and steel: stanchions etc. including bailing out water, Formwork, cover blocks compaction and curing roughening the Surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, with fully automatic micr processor based PLC with SCADA enabled concrete batch mix plant With Natural Sand (I.N0.25.11 -P.NO.222)

Itetn No. 5 Providing and casting in situ ccmcntconcrctc M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. colurnns as per detailed designs and drawing or as dircctcd including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Natural

Item No. 6 Providing & casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand.

Item No.7 Providing and fixing in position 'I'M'I' - FE - 500 barreinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed

Item No.8 Providing masonry with conventional / Indian standard type bricks in cement mortar 1:6 in superstructure including strikig joints, racking out joints and watering and scaffolding complete.

Item No. 9 Providing and casting in situ. Cement concrete M15/1:2:4 of trap /granite/ quartzite / gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including centering, form work compacting, roughning them if special finish is to provided, finishing if required, and curing etc. complete. ( J.N0.24.16 , P.N0.221 )

Item No. 10 Providing internal cement plaster 12mm. thick in two coat in ccnusnt mortar 1:5 without necru finish to concrete, brick surface, in all positions including scaffolding and curing complete using pozzolana cement. etc. I.NO 32.03 P.NO. 260

Item No. 11 Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. I.NO 32.08 P.NO. 260

Item No. 12 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. l.NO.35.14, P.NO.282 )

Item No. 13 Providing and fixing mild steel grill gate with angle iron frame 65 mm x 65 mm x 10 mm with iron bars at 1.50mm.C/C and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement, welding riveting and oil painting of three coats of approved shade. Weight of gate 35 Kg/smt. I.NO 44.10 P.NO. 376

Please Enable Macros to View BoQ information