WATER/PIPELINE/YEARLY

Amount

Item No.1 - Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tail- piece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed..

Item No.2 - Supply of C.I. Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538/1993.

Item No.3-Supply of CI Mechanical joint All Socket Tees as dimensionally described in Table -18 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. (dimensionally described in IS- 12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes

Item No.4- Supply of C. I. Mechanical Joint Double Socket 90 (11/4’’) Bends as dimensionally described in Table-14 of IS-13382/ 1992 complete with sealing rubber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.

Item No.5 -Providing double flanges Sluice Valve conforming to IS-2906/14846 including work gear arrangments as per test pressure, stainless steel, spindle, caps, including all taxes, transportation etc. complete a)Sluice valves - PN -1 (Without by pass)

Item No.6- Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. (Rate for all class of valves.)

Item No. 7- Providing D.I. pipes - Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specificatioinclusive cost of jointing materials (Rubbegasket of EPDM Quality ) excluding GSlevied by GOI & GOM in all respect including Third party inspection charges of TP Agency approved by MJP including Trans insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Trans- portation to departmental store, unloading, stacking etc. completed as directed by Engin`eer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gaskets. (IS:8329-2000 Latest Version)

iii) 200mm

Item No.8 -Providing & Supplying ISI mark rubber gasket suitable for C.I. or D.I. Pipes of all calss for tyton joints including all taxes (Central & Local), inspection charges,transportion to departmantel stores/ site etc. complete a)S.B.R. Gaskets for C. I. / D.I. Pipes

Item No.9 - Welding in all positions with required number of runs, for M.S. pipe internally and / or externally including gauging wherever necessary fixing, appurtenance & other accessories in connection with pipe laying work as per specification Basic Rate + add 10% for Hilly.

Item No. 10 - Providing and making lead caulked joint - Providing and making lead caulked joint with molten lead to Cast Iron pipes and / or specials of all classes and fitting of following dia including cost of lead and all jointing material, labour, hydraulic testing etc. complete.

Item No.11-Providing and supplying ISI standard CI flanged/ S& S specials including all statutory duties & taxes such as GST levied by GOI & GOM in all respect , railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store / site, unloading stacking etc. complete.

B) SS Special / socketed branch flanged special

i) 80mm to 300mm dia

C) Plain ended/ palin ended branch flanged special

i) 80mm dia to 300mm dia

Nut Bolts

Item No.12 -Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004 Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below . Medium

Item No.13 -Lowering laying and jointing G.I. pipes and specials of following class and diameter including conveyance from stores to site of works. All labour, giving satisfactory hydraulic test, etc.complete. Eiter undergoubd or in vertical position as directed by Engineer-In-Charge.

Item No.14- Excavation for foundation / pipe trenches in erth, soil of all types sand, gravel & soft murrum including removing the execavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering , preparing the bed for foundation & excluding backfilling etc.complete. Basic Rate + add 10% for Hilly.Area.

Lift 0 to 1.5 M

Item No.15-Refiling the trenches with available excavated stuff with soft material first over pipeline & then hard material in 15cm layers with all leads & lifts including consolidation, surcharging etc. complete. Add 10% H.A

MJP SSR 2021-22 P.No.54, I.No.15

Item No.16-Making cross connection to exiting distribution main of any type including excavation breaking & removing existing pipes, lowering, laying, of specials & pipes I the position, refiling, closing the water supply in that area, dewatering & restarting the water supply etc. complete as directed by Engineer In-Charge for following diameter of existing pipeline, irrespectiveof diameter of branch line . ( the number of joints involved will be paid separately depending upon the nature of joints & required pipes, valves & specials will be supplied free of cost at stores

Item No.17- Lowering laying and jointing with SBR ruber gaskets C.I./ D.I.. S/S pipes of various classes with CI/DI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. with rubber ring Note : Only SBR Rubber gaskets to be used as per IS-5382 and IS-12820.

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. PWD SSR 2022-23 ,I.No.42.12 add 10% for H.A.

As per Rate Analysis 2

Item No.19-Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade

As per Rate Analysis 1

Item No. 20-Dismantling dead pipeline G.I./ A.C./ P.V.C./ S.W.H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-In-Charge with all leads and lifts including cleaning the surface etc. complete. MJP SSR 2021-22 P.No61,I.No.11(A ,B) add 10% for H.A.

For M.S./ R.C.C./ C.I./ P.S.C.

For G.I./ A.C./ P.V.C/ S.W./ H.D.P.E.

Item No. 21- HDPE Pipe Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading /unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete 6 kg/sqcm

iii)110 mm

Item No 22- HDPE Pipe Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II

iii)110 mm

Item No. 23- HDPE SPECIALS Providing & Supply of Electro Fusion Fittings inaccordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance,loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete

Couplers

iii)160 mm

Equal Tee

iii)160 mm

Elbow 90 degree

iii)160 mm

Reducer

Item No.24- Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. Air Valve Single Ball Flanged / Screwed Type - PN -1 MJP SSR 2021-22 P.No135 ,I.No.5 a

iii) 25 mm

Item No.25- Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). Air Valve Single Ball Flanged / Screwed Type - PN -1.6 MJP DSR 2019-20 P.No137 ,I.No.10 a

iii) 25 mm

Technova Infrastructure Private Limited (BID ID -6574358)

OM ENTERPRISES (BID ID -6575410)

SHIVSHAMBHO ELECTRICAL (BID ID -6574732)

Vishal Construction (BID ID -6594407)