Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹25.7 L+₹74,680 (3.00%)Rejected-AOC 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L2 | Rejected-AOC Rejected due to not being L1 | |
| 3 | L3₹29.9 L+₹5.0 L (19.9%)Rejected-AOC | L3 | Rejected-AOC Rejected due to not being L1 | |
| 4 | L4₹32.2 L+₹7.3 L (29.3%)Rejected-AOC A 95 SANJAY NAGAR BHARATPUR RAJ 321001 | BHARATPUR | BHARATPUR | RAJASTHAN | 321001 | L4 | Rejected-AOC Rejected due to not being L1 |
Tender Value
Refer Docs
EMD Value
₹72,000
Closing Date
20 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
Garrison Engineer (North) Udhampur
GE/U(N)-68/2023-24 REPAIR AND CERTAIN MISC B/R ITEMS ALONG WITH CONNECTED ITEMS AT JNE CELL, ASHOK VIHAR CELL AND ADJOINING AREA, UNDER AGE B/R-II OF GE (NORTH) UDHAMPUR
2023_MES_634229_1
GE/U(N)-68/ 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE NORTH UDHAMPUR
₹72,000
Yes
12 Mar 2024
23 Dec 2023
22 Jan 2024
23 Dec 2023
20 Jan 2024
6 Jan 2024
Amount
Demolition of brick work or stone masonry built in cement mortor including all quoins aches pillar etc but excluding ashlar facing dressed stone work and precast concrete articles all as specified. .
Demolition of cement concrete (unreinforced) in any position i.e. floors and paving’s etc nexc 15 cm thick (below or above G.L.) complete all as specified.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in cm 1.6 all as specified.
All as per above but except bricks
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.
M&L for 15mm thick rendering on fair faces or brick / concrete surfaces in cement mortar 1:4 and finishes even and smooth without using extra cement.
Excavation in trenches, n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation or for shafts, wells, cesspits, manholes, pier holes etc, n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out in any type of soil, complete all as specified and as directed.
Excavation in trenches, n.exc 1.5 mtr wide and exc 1.5 mtr in depth but n. exc 3.00 mtr in depth, for foundation , laying of pipes and cable etc or for shafts, wells, cesspits, manholes, pier holes etc, n.exc 10 sqm on plan and exc 1.5 in depth but n.exc 3.00 mtr in depth and getting out in any type of soil, complete all as specified and as directed..
M&L for returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm, in any type of soil, complete all as specified and as directed.
Removing excavated material (soil) to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point, complete all as specified and as directed .
Dismantling of cast iron drain pipes, jointed in cement mortar and taking out of trenches (if required), of 75/100mm dia pipes, complete all as specified and as directed.
Demolition and breaking up of drain pipe of 150 mm to 300 mm dia (Salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and as directed.
Concrete bed to drain pipes of bore 150mm including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports, complete all as specified and as directed. Note:- (i) Thickness of bed below barrel of pipe -10 cm. (ii) Width of bed :- outer dia of pipe plus 30 cm.
All as per item No above here in before, but 200 mm dia of pipe.
M&L Reinforced concrete pipe Class NP2 laid and jointed complete with collars internal diameter 150 mm laid in trenches and complete all as specified and as directed.
M&L Reinforced concrete pipe Class NP2 laid and jointed complete with collars internal diameter 200 mm laid in trenches and complete all as specified and as directed.
M&L100 mm bore cast iron soil waste and vent pipes, sand cast, in any length with or without ears, with cement joints but fixed in walls, complete all as specified and as directed.
S&F 75 mm bore cast iron, soil waste and vent pipes, sand cast, in any length with or without ears, with cement joints fixed on walls, complete all as specified and as directed.
S&F PVC (SWR) pipe 110mm dia single socket in any length with rubber ring joints fixed to wall / floor including PVC clamps.
M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping. Kneelers, bed block including necessary form work.
M&L two coat of white wash on new plastered wall surfaces including preparation of surface.
M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
M&L Waling of random rubble masonry built in cement motar 1:6, uncoursed, well bounded, bedded and solidly hearted complete all as specified and as directed.
All as per above but except stones.
M&L cement concrete in foundation filling and mass concrete type D2 (1:4:8) using 40 mm grade agg as in foundation
M&L for PCC 1:2:4, B-1 (20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge.
S&F mild steel work as in posts & struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc & similar work confirming to Fe 290 Gde E-165 as specified and as directed.
S&F Galvanshied 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and as directed.
S&F of high tension wire concertina razor coil of 988 mm dia with medium size blade at 35 mm spacing, blade with 20 mm, spirals 7 per/RM spiral spread at 150 mm c/c including fixing with steel clips all as per manufacturers instruction complete all as specified and as directed.
S&F Steel work in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete fastening and fixing complete FE -410 Gde E-250 as specified and as directed.
M&L Mild steel, plain, black sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required and specified and as directed by Engr-in-Charge.
S&F tubes, `medium grade' galvanised, with all fitting and fixed complete to walls 32 mm bore as specified and as directed.
M&L for Granite (of any tpe),18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window clips, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-Charge.
M&L two coat of synthetic enamel paint on steel surface over one coat of priming with red oxide, zinc chrome of any description over 10 cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.
Cutting into existing manholes for connecting new drains (internal dia of pipe n.exc 200 mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) smooth finished, and reforming benching complete all as specified and as directed.
PCC 1:4:8 type D-2 as in floors 75mm thick complete all as directed & specified.
M&L for Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over 50mm thick sand cushion all complete all as specified and as directed by Engr-in-Charge.
M&L for Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 grade with grey cement and pigment all as specified.
M &L for 25mm thick Sand cushioning /filling under floors or complete all as specified and as directed by Engr-in-Charge.
M&L for chequred cement concrete tile size 20cmx 20cm x 25mm thick machine pressed set & jointed in neat cement slurry as in floors joint fill up with white grey cement & pigments all including 15mm thick screed bed with CM 1:4 all complete all as specified and as directed by Engr-in-Charge.
M&L for Providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb stone and similar work, bedded and jointed in CM 1:6 as specified and as directed by Engr-in-Charge.
Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.
M&L for RCC M-25 type B1 1:2:4 (using 20 mm graded stone aggregate) as in beams, cantilevers, bres summers, lintels over 1.5m span complete all as per specified.
M&L for RCC M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm the plastering with water proofing compound as directed laid/made to slope as in RCC roof surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for RCC M-25 Columns, pillars, piers, posts and struts complete all as specified and as directed by Engr-in-Charge.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter as per specified.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as per specified.
M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as per specified.
M&L for TMT bars, 10mm dia and over cut to length, bent to shape required, incl cranking bending, spirally for hooping for columns, hooking ends and binding with and ind MS wire annealed not less than 0.90 mm dia or securing with clips complete all as specified and directed.
S&F mild steel bars TMT 6mm to 8 mm dia as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.
Excavation in post holes (or similar holes) each not exceeding 0.5 cum, in any type soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation for fencing post filling, and mass concrete, complete all as specified and directed.
Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed by Engr-in-Charge.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire only complete all as specified and as directed by Engr-in-Charge.
Holes drilled up to 12mm dia (and countersunk, if required) depth of holes exc 3mm but nexc 12mm complete all as specified and as directed by Engr-in-Charge.
M&L for Providing precast cement concrete louvers and jallies, 50 mm thick ( measured solid) including all mouldings but excluding frame type B-0 1:2:4 ( 12.5 mm graded stone aggregate) set in CM 1: 4 complete all as specified and as directed by Engr-in-Charge.
M&L 18/19mm thick prelaminated particle board medium density flat pressed single layer type or three layer type with BWR type adhesive fixed in any portion. complete all as specified and as directed by Engr-in-Charge.
S&F for Hasp and staple, 100 mm, mild steel, safety type, stove enalmelled black , including bolt to hinge plate and fixed with screws, complete all as specified and as directed by Engr-in-Charge.
S&F for Continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flap 30mm as specified and as directed.
KUMAR CONSTRUCTION CO
RAMAN KUMAR
V K CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .