SPECIAL REPAIR TO REGIMENTAL COMPLEX AT AF CAMP NARAINA IN AOR OF GE (AF) FARIDABAD

Amount

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

All as per item No 02 above but except bricks

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in CM 1:6 on brick Work or concrete surfaces including finished the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick in CM 1:4 on brick work or concrete surface finished the surface even and smooth w/o using extra cement incl WPC @ 3% by weight of cement at any height etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Finishing walls with textured exterior paint of required shade : New work (Two coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm on new surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surface walls and applying two coat of plastic emultion of paint one coatof primer over one coat of 3 mm thick wall care putty for complete smooth surfce all as specified and directed by Engineer-in-Charge.

All as per item No 10 above but on ceiling

M&L for preparation of new plastered surface on walls, roof boarder, drops, fins, chajja / roof facia, column surface obtain smooth finish using sand paper and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction ,complete all as specified and directed by Engineer-in-Charge.

All as per item No 12 above but on ceiling

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for fully Vitrified tiles ultra/double charged/HD high glossy finish 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm in floors. set and jointed in neat cement slurry and spacer incl pointed in white or colored shine Epoxy tile grout to match over 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

All as per item No 15 above but on vertical surface as in dado/skirting etc.

M&L for Granite 16-20mm thick (Italian/Gress) (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing with diamond cutter complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

S&F repair for factory made Solid WPC Door frame size ( 45mm X 85mm Single Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings including all necessary assories as directed by the Engineer-in-Charge. Note :The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity.

S&F for factory made Solid WPC Door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings including all necessary accessories as directed by the Engineer-in-Charge. Note :The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity.

S&F for factory made 30mm Thick MOLDED WPC with decorative surface 2mm thick Moulded wood grain printed Prelam PVC sheet on front face and 2mm thk PVC sheet on back side, 100 % Solid door ( Conforming As Per IS : 4020 ) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side palin with density not less than 600 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be Water Proof , Termite Proof , Fire Retardent and having screw holding capasity.Fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screw incl Aluminum Jali and Stainless wiremess and other assories as per required. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed by Engineer-in-Charge.

M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium with one or more rebated incl jointed cleat for fixing etc complete all as specied and directed

M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality glass incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as specified and directed by Engineer-in-Charge.

M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality frosted glass incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as specified and directed by Engineer-in-Charge.

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and directed by Engineer-in-Charge.

M&L for 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beading and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified and directed by Engineer-in-Charge.

S&F for 10 -12 mm thick glass door, frosted with certain logo, fixed with floor spring, fixed on floor with two nos stainless steel handle of 300mm on each leaf and fixed partition arrangement incl necessary provision to lock the door complete all as specified and directed by Engineer-in-Charge.

S&F double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engineer-in-Charge.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed by Engineer-in-Charge.

S&F of door closer hydraulically regulated design No 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg etc complete all as specified and directed by Engineer-in-Charge.

S&F of Mortice lock vertical type 4 lever etc complete all as specified and directed by Engineer-in-Charge.

M&L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface plain or moulded, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed by Engineer-in-Charge.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm complete all as specified and directed by Engineer-in-Charge.

M&L for one coat of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed by Engineer-in-Charge.

M&L in repair of one piece closet with bowl for coupled WC with PP soft seat cover , hinges fixing accessories and accessories set of size 365x655x760 mm, s trap 220 mm withsyphonic flushing cistern with necessary fittings complete all as specified and directed by Engineer-in-Charge.

S&F in repair wash hand basin table top of size 600x400x175 mm vitreous China including , waste coupling & PVC waste pipe of 32 mm dia etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-Charge.

S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

S&F in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed by Engineer-in-Charge.

S&F for 15 mm bore Twin one angle valve/ bib tap cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge.

S& F for 15mm swan neck pillar cock fancy type long head chromium plated screw with iron pipe incl all fittings in repairs complete all as specified and directed by Engineer-in-Charge.

S&F for CP brass Centre hole mixer without pop up waste system with 450 mm long braided hoses, 20mm cartridge size for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified and directed by Engineer-in-Charge.

S&F in repair for CP telephonic jet (Health Faucet) with all fitting and fixture for EWCs with 8 mm Dia 1.2mt length long flexible tube complete all as specified and directed by Engineer-in-Charge.

S&F for 5-7 mm thick looking mirror with megnetic looking arrangements fixed with and inclduling chromium plated brass screws and SS plugs complete all as specified and directed by Engineer-in-Charge.

S&F for vitreous china sensor urinals size-485x300x740 mm including all necessary fittings etc complete all as specified and directed by Engineer-in-Charge.

S&F for 8 mm thick toughend frosted glass urinal partitions including all necessary stainless steel fitting etc complete all as specified and directed by Engineer-in-Charge.

S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified and directed by Engineer-in-Charge.

S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engineer-in-Charge.

S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified and directed by Engineer-in-Charge.

S&F for PVC connections 45/60cm long superior quality with PTMT nut on both side complete all as specified and directed by Engineer-in-Charge.

S&F in repair grating round 100 mm size of CP complete all as specified and directed by Engineer-in-Charge.

S & F in repair for CP towel racks with lower hanger complete all as specified and directed by Engineer-in-Charge.

S&F for rotational moulded polyethylene water storage tripple layred tanks (cylindrical vertical with closed top) of 1000 ltr capacity, hoisted and fixed repair in position including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F for 20mm dia Nipple suitable for HDPE water tank.(Minimum weight 20mm 45gms ) complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm dia Unions. brass to connect iron to polyethylene and fixed complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel pegset of six suitable size of length complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm dia Decorative/ fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC/steel conduit pipes with accessories complete all as specified and directed by Engineer-in-Charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F ventian blind for window including necessary items required for fix to wall complete all as specified and directed by Engineer-in-Charge.

Dismantling of polycarbonated sandwitch type sheets complete all as specified and directed by Engineer-in-Charge.

S&F 6.0 to 8.0 mm thick polycarbonate sandwitch type sheets in semi circle shape on roofs of desired colour and fixed with aluminium metal flat / angle / tee sections including rubber beadings and silicon water proofing sealent jell for joining the sheets together and self tightening screws of reputed quality and make complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed by Engineer-in-Charge.

S&F for GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings complete all as specified and directed by Engineer-in-Charge.

All as per item No 67 above but laid in trench or in floor complete all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore PVC Gully Trap setting/jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F for 110mm bore PVC bends/junction/with door any radius complete all as specified and directed by Engineer-in-Charge.

S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings complete all as specified and directed by Engineer-in-Charge.

All as per item No 71 above but laid in trench or in floor complete all as specified and directed by Engineer-in-Charge.

S&F for 75 mm bore PVC bends/junction/access door any radius complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed by Engineer-in-Charge.

M&L in repair for 4mm Aluminum composite panel for Exterior wall paneling any color/design approved by Engr-in-charge, inclusive of fixing on to wall/ceiling/frame incl L Corner, moulding end caps and silicon filling and fixed with screws and other arrangement as required at site complete all as specified and directed by Engineer-in-Charge.

S&F Acrylic letters (English/Hindi) 300 mm high, 50 mm width and 3 mm depth hollow wall fixed on walls surface or 3mm ACP sheets board of any description using stainless steel screws of suitable size or best quality adhesive including LED module rain proof lights fittings in each letters complete all as specified and directed by Engineer-in-Charge.

Dismantling wall ceiling and boards, (fibere pulp, insulation etc. or insulation boards abdy thickness including cover fitllets complete all as specified and directed by Engineer-in-Charge.

M&L for PVC hollow panelling 5 to 8 mm thick on ceilling with necessary frame ‘Tee’ of size not less than 22.50 x 22.5 x 0.5 mm Angle of size 22.5 x 22.5 x 0.5 mm & FI as per std engineering practices work in Design POPUP pattern and any colour approved by engr-in-charge, inclusive of fixing on to ceiling incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed by Engineer-in-Charge.

Dismantling of AC/GI sheet (corrugated, semi corrugated etc) of any thickness incl ridges hips valleys as in roof coverings complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie etc complete all as specified and directed by Engineer-in-Charge.

S& F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.

S & F for rolled steel sections as in main and cross beams, hip and jack rafters,truss, purlins where connected to common rafters and running rails, cleat or other connecting plates cutting, welding including Nut Bolts, Fe 410-W(Gde -E-250) quality A complete all as specified and directed by Engineer-in-Charge.

All as per item 82 above, but fixing only

S&F for 5mm dia welded steel wire fabric weight per sqm not exc 4Kg fixed complete to wood or steel member if any complete all as specified and directed by Engineer-in-Charge.

S & F for mild steel framed work as in grill, guard bars etc with ends of bars/FI shoulders and or riveted or forged in to spikes, framed guard bars, barred iron doors, ladders, frame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer-in-Charge.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L for providing and fixing stainless steel (Grade 304) railing/gate made of hollow tubes, channels, plates etc., incl welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engineer-in-Charge.

M & L for precast cement concrete louvers and jallies, 25mm thick, type B0 1:2:4 (12.5 mm stone aggregate), set in CM 1:4, including all mouldings complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping/benching and all other similar works including necessary formwork complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes work and disposal of debris complete all as specified and as directed.

M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone agg. ) as in plinth protection any paved area complete all as specified and directed by Engineer-in-Charge.

M&L 75mm thick PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge.

Dismentling of interlocking paver block including sand filling complete all as specified and directed.

M&L for 80 mm thick machine cut precast concrete inter locking paver block with grey cement and pigment ,(M-40) grade any colours (confirming to IS 15658-2006) complete all as specified and directed by Engineer-in-Charge.

All as per item no 97 above but except paver block.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed chequered tiles of size 300 x 300 x 25 mm thick (colour design and glazed approved by EIC) with grey/coloured cement and pigments laid over and incl 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed by Engineer-in-Charge.

Removing/getting out of excavated material/spoils/debbries dumped at site to a distance exceeding 500 m but n exc 1.5 km and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed by Engineer-in-Charge.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet for provision of switches/regulators as per specified SSR and as directed by Engineer- in- Charge. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 101 above but 5 Amp socket outlet, independent complete all as specified and directed by Engineer-in-Charge.

All as per item No 101 above but on the same board complete all as specified and directed by Engineer-in-Charge.

All as per item No 101 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

S&F switch piano, flush type single pole, one way, 5 Amps, 240 volts complete all as specified and directed by Engineer-in-Charge.

S&F switch piano, flush type single pole, one way, 15 Amps, 240 volts complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 2 in 1, 3 pin 5 Amps complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 3 pin , 3 pin 15 Amps flush type all as specified and directed by Engineer-in-Charge.

S&F ceiling roses, 3 phase, PVC/Polycarbonate, isolated body all as specified and directed by Engineer-in-Charge.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of LED tube light along with fixture,20W complete with all accessories with twin conductor complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of LED tube light along with fixture,9W complete with all accessories with twin conductor complete all as specified and directed by Engineer-in-Charge.

M&L for Recess mounted 15 Watt high efficancy recess LED slim round downlighter IP20 with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed by Engineer-in-Charge.

Supply and install in replacement MCCB 4P fixed type 125 Amps rated with breaking capacity 16 KA complete all as specified and directed by Engineer-in-Charge .

Supply and install in replacement SPN enclosure including plug And socket with 16 to 32 Amp SP MCB C Curve 10 KA complete all as specified and directed by Engineer-in-Charge .

S&F exhaust fan sweep 250 mm in replacement made up of sturdy engineering plastic complete with louvers shutter , voltage 230 V , 50 Hz , 1200 RPM copper wound complete all as specified and directed by Engineer-in-Charge .

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 2 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

M&L for earthing with galvanised steel plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25mtr deep from ground level) surrounded from all directions with charcoal dust, salt and edge of earth plate not less than 1.5 mtr below ground level connected to galvanised iron strip or wire 4mm dia. earth lead by means of nuts, bolts and washers incl excavation and earth work PCC chamber and RCC cover of 1:2:4 type B-1 using XPM weighing not less than 4 Kg/Sqm using 20mm graded stone aggregate for coping/under covers, 20mm size GI pipe light grade for watering funnel wire mesh etc, complete all as specified and directed by Engineer-in-Charge and shown in electrical plate No-03 of SSR Part-I.

S&F in replacement street light GI pipe bracket 50 mm dia 1.50metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc complete all as specified and directed by Engineer-in-Charge.

S&F in replacement LED Street light fitting 45 W pressure die cast aluminium housing with lens and toughened glass top maintanable type , IP66 on building as secutiy light fitting ,the light fitting shall be fixed complete with all the connections complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB DB TPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar WITH INCOMER AS 4 POLE MCB 240/430V for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one and complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB DB SPN 8 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one and complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of MCB SP 6 to 32 amps 230 Volt complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of MCB SPN 32 Amps 230 Volts complete all as specified and directed by Engineer-in-Charge.

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper complete all as specified and directed by Engineer-in-Charge. Note : Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

S&F single pole blanking plate in the existing cover plate complete all as directed and specified by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 m wide and and not exceeding 1.5 m depth in loose/soft soil and getting out complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, with excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed by Engineer-in-Charge.

M & L for brick for cable protection with sub class 'B' bricks laid dry flat over electric cable in trenches complete all as specified and directed by Engineer-in-Charge.

M & Labour for sand cushioning with a layer of sand 80mm thick consolidated before laying of cable and 150mm thick consolidated after laying of cable in trenches ducts for electric cable protection including consolidation complete all as specified and directed by Engineer-in-Charge.

M& L for taking down and refixing Ceilling fan / exhaust fan/ wall mounted fan of any type and rating on any surface complete all as specified and directed by Engineer-in-Charge.

S&F in replacement fan rod of length 2 to 3 feet complete all as directed and specified by Engineer-in-Charge.

Maninder Singh Lohia

M/S Rohit Enterprises

M/S Yamin

Singh Associates

VED PRAKASH ARORA