Attending Common repair works at 76 TNGRHS taylors road

Amount

Removing the damaged Pressed tiles above the weathering course in the open terrace without damaging the adjacent structureand removing the debris away from the site to a initial Lead of 1 Km etc., all complete complying with standard specification and as directed by the departmental officers

Laying of pressed tiles above the weathering course the top of roof with one course of machine pressed tiles of following size of Using Pressed Tiles of 230mm x 230mm x 16 mm to 18mm approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Roof tiles repointing by replacing deteriorated mortar along a roof's tiles ridge and hip caps to ensure it remains secure and watertight using in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Attending repairs in the external Bore well water/Metro water supply inlet/distribution line Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.

Block A & B common duct 110mm dia pipe

Block A & B common duct 75mm dia pipe

Removing the existing damaged unworkable 7.5 H.P monoblock pumpset from its position and refixing after attending electrical rewinding with copper wire,varnishing and the required accessories to run the motor in perfect condition and refixing the motor in its position., all complete and as directed by departmental officers.

Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Removing and relaying of following size of Damaged Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc., The rate inclusive of all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers Make: POLYCAB/ PARACON / FINOLEX / EQUIVALENT.

4 core 10 sq.mm armoured aluminium cable

Cleaning of SUMP by through scrapping two times with brush and bleaching powder inside around the walls and bottom of the sump walls including bailing out dirty water two times including cost of brush,bleaching powder and hire chages for bucket,rope etc, and labour charges for cleaning complete in all complete and as directed by departmental officers.( Botto & side )

Cleaning of OHT by through scrapping two times with brush and bleaching powder inside around the walls and bottom of the OHT walls including bailing out dirty water two times including cost of brush,bleaching powder and hire chages for bucket,rope etc, and labour charges for cleaning complete in all complete and as directed by departmental officers.

Sub Total

GST at 18%

Sabari Designs (BID ID -1533392)