Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC 161 SADAR BAZAR SADAR BAZAR CANTT AYODHYA UP PIN 224001 | AYODHYA | AYODHYA | UP | 224001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹9.0 L+₹61,351.75 (7.32%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹9.8 L+₹1.4 L (16.6%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹9.8 L+₹1.4 L (16.8%)Rejected-Finance MIG 444 AWADHPURI COLONY AMANATGANJ AYODHYA 224001 | AYODHYA | AYODHYA | UTTAR PRADESH | 224001 | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹10.3 L+₹1.9 L (23.1%)Rejected-Finance | L5 | Rejected-Finance Not being L1 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
17 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) Ayodhya
AGE (I) (MES) Ayodhya Cantt (UP) PIN-224001
PROVN OF 2XTOILET CUM BATHROOM NEAR BLOCK BAAZ LINE NO. 03 AND CERTAIN MINOR WORKS AT AYODHYA CANTT UNDER AGE (I) AYODHYA
2023_MES_604163_1
8373/E8
Open Tender
Civil Works
Item Rate
120 days
Ayodhya
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) Ayodhya
₹20,000
Yes
4 Aug 2023
19 Jun 2023
19 Jul 2023
19 Jun 2023
17 Jul 2023
3 Jul 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified.
Demolition of brick work or stone/boulder masonary built in cement mortart including all queens, arches, pillars etc but excluding ashlar facing, precast concrete articles and the like complete all as specified and as directed
Taking down chowkat or door frame (without taking off shutter from frame) exc 1.50 Sqm but not exc 4.00 Sqm each complete all as specified and as directed
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete as specified and directed.
M&L for PCC (1:4:8) type D2 ( using 40 mm graded stone aggregsate) as in foundation, filling and mass concrete complete all as specified and directed.
Use and waste of formwork to foundation, footings, plinth beams, bases of columns and the like for rough finished flat concrete surfaces complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick for fair finished flat concrete surfaces complete all as specified and directed.
Use and waste of formwork to columns and the like for fair finished flat concrete surfaces complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
S&F mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
S&F TMT steel bars 6mm dia and over upto and including 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups, rings and binders complete all as specified and directed.
M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundation, footings, foundation beam, plinth beams and bases of columns, basement slabs and mass concrete complete all as specified and directed.
M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in columns pillers, piers, posts and struts complete all as specified and directed.
M&L for RCC (1:2:4) type B1 ( using 20 mm graded stone aggregate) as in slabs supported on walls, beam, and colums in floors, roofs, landings, deck slabs and shelves and the like complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6m mean radius complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks in cement mortar (1:4) in half brick th walls, straight or curved on plan exc 6m mean radius complete all as specified .
M&L for sand filling under floors, foundations and cushioning layer below interlocking paver tiles, laid & spread in any thickness and well compacted to a true surface complete all specified and directed.
M&L for hardcore of broken bricks or boulders n.exc 15 cm thick of gauge n.exc 63 mm, deposited, sprayed and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggrgate) as in sub base, sub floor and the like complete all as specified.
M&L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc over and including 15mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 350x250x 7 mm / 450x350x7mm thick as in vertical surface over and including 10mm thick rendering coat incement mortar (1:3), set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles complete all as specified and directed.
S&F 25 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.
S&F 20 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.
S&F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.
S&F 1000 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I and directed by Engineer-in-Charge.
S&F 15mm bore bib taps cast copper alloy, screwed down high pressure with crutch or butterfly handle, fancy type, chromium plated, screwed for iron pipe or for brass furule complete all as specified and directed.
S&F 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F 15mm bore stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle, fancy type with long chank & cup (concealed type), chromium plated, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (min weight 15mm-142 gms/20mm-210 gms), fixed to iron pipe complete all as specified and directed.
S&F 32mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45 gms/40mm-60 gms) for kitchen sink complete all as specified and directed.
S&F glass shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (min weight 300 gms) complete as specified and directed.
S&F Towel rail of CP 600 mm long fixed with and including Chromium plated brass screws and wooden/ plastic cleats (min weight 190 gms) complete as specified and directed.
M&L 75mm dia PVC floor trap with grating including jointing to waste pipe, fixed in cement concrete (1:2:4) type B-1 complete as specified and directed.
S&F 110mm bore PVC (SWR) rain water, soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls or laid in floor complete as specified and directed
S&F 75mm bore PVC (SWR) rain water, soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls or laid in floor complete as specified and directed
S&F110mm bore PVC (SWR) branch pipe, single Y equal or unequal with access door complete all as specified.
S&F 75mm bore PVC (SWR) branch pipe, double Y equal or unequal with access door complete all as specified and directed.
S&F PVC ( SWR ) vent cowl suitable for 110 mm bore pipe complete all as specified and directed.
S&F viterious china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and fixed complete as specified and directed
S&F vitreous china wash hand basin, white, flat back, size 450 X 300 mm excluding taps, wash, chain and plug and procelain stopper but including brackets cutting for pinning in ends of brackets or erecting stand and waste coupling and waste pipe (half or full thread, min weight 32mm-45 Gms/40mm-60Gms) complete as specified and directed
S&F 125 mm size shower rose, brass chromium plated with or with out swivel joint including fixing to steel pipe or union complete all as specified.
S&F 10 litres capacity PVC valveless syphonic action type flush cistern low level white with inlet ball valve float & handle including brackets and flush pipe of polythene of low or high density 32mm dia for low level cistern complete all as specified and directed
S&F 15mm dia bore angle stop valve, cast copper alloy, chromium plated, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified and directed
S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing and as directed.
S&F pressed steel doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc complete,as specified and as directed.
S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete,as specified and directed.
S&F flush shutters solid core construction 40mm thick with block board core and plywood face panels, commercial type on both sides complete,as specified and directed.
S&F 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared toreceive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beeads for securing glass, etc size of memebers of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) : supplied and fitted to chowkats complete,as specified and directed.
S&F 100mm long butt hings medium weight cold rolled mild steel and fixed complete all as specified.
S&F 200mm long aluminium anodised tower bolts and fixed complete all as specified and dirrected.
S&F 150 mm size aluminium handles, cast type, anodised and fixed complete all as specified and directed.
S&F Mild Steel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete.
M&L preparation of new wood or wood based surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a caot of red oxide primer complete all as specified and directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperature 1.40 and fixed with stainless steel wire staples complete all as specified and directed.
M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling, finished even and smooth with out using extra cement complete all as specified and directed.
M&L for 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 as in internal walls to be finished even and smooth without using extra cement .
M&L 15 mm thick rendering on fair faces of brick work or concrete surface as in external walls in cement mortar (1:4) mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured & paid for separately at supply only rate.
M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for cement concrete (1:2:4 type B-0 (using12.5 mm graded crushed stone aggregate) as in roof padding , laid in any thickness complete all as specified and directed by Engineer-in-Charge.
M&L for 10 mm thick plastering in cement mortar (1:3) mixed with water proofing compound as per manufacturer's instructions, finished even & smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured & paid for seperately at supply only rates.
Supply only liquid water proofing compound, ISI marked, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft/loose soil complete all as specified and directed.
Removing excavated material (soil) to a distance exc 50 mtr but n.exc 250 mtr and depositing where directed at a level n.exc 1.50 mtr above starting point complete all as specified and directed.
M&L for 75 mm PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection / path complete all as specified and directed.
M&L for 40mm thick damp proof course (DPC) in cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) mixed with water proofing compound as per manufacturer's instructions, laid to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.
S&F 20mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F 150mm size floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring and fixed complete as all as specified and directed.
M&L for 150 mm dia bore reinforced concrete pipe, class NP2, laid and jointed with collars in cement joint complete all as specified and directed.
M&L for concrete concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and completely surrounding pipe with concrete after they are laid, jointed and tested for 150mm dia bore of pipe complete all as specified and directed.
M&L for cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in surface channel and drains complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms , moulds, mitred / stopped ends etc complete all as specified and directed. Note: Inner girth of channel shall be measured.
M&L for new concealed type point wiring for one light/fan point controlled by one, one way switch with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified and directed.
M&L for new concealed type power point wiring for 16 Amps socket outlet on idependent board, controlled by one, one way 16 Amps switch with PVC insulated PVC unsheathed electric (FRLS) cable of size 2.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 2.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth continuity conductor, connected to earth dolly by providing lugs including non-modular type metal sunken boxes with 3mm thick hylam sheet top cover including necessary cutting for fixing switches, sockets etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade of adequate size with all conduit accessories in concealed wiring system complete all as specified and directed.
S&F switch piano flush type one way 6 Amps complete all as specified and directed.
S&F switch piano flush type one way 16 Amps complete all as specified and directed.
S&F socket 2 in 1, 5 & 15 Amps flush type complete all as specified and directed.
M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.
S&F epoxy powder coated MCB distribution box double door SPN 4 way for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed
S&F MCB SPN 40 to 63 Amps, 230 Volts C series 10 KA, including necessary connection complete all as specified and as directed.
S&F MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 Amps, 240 Volts in proper position all as specified and as directed.
S&F indoor luminare batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 20 W incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.
S&F LED building light fitting 35 Watt 230 Volt AC oudoor type with driver and high pressure die cast aluminium hosing and heat resistant lamp bracket with impact and corrosion resistant including thermal management in multiple opticscomplete with IP 65/66 protection all as specified and as directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
M&L for sub main wiring with two runs of 4.00 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
S&F electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltrs, BEE 5 Star rated with all accessories such as safety valve, thermostate, NRV, connection pieces etc complete all as specified and directed.
S&F lamp holder PVC / polycarbonate type with & inclding LED bulb 9 Watt complete all as specified and directed.
S&F exhaust fan 300 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified.
S&F inverter series split type AC with cordless remote control unit 5 Star rating of 2.0 ton capacitywith copper condenser coiland connecting pipe and cable not less than 3 mtr to connect with existing electrical point and with wall mounting iron stand for outdoor unit complete all as specified and directed.
S&F inverter series split type AC with cordless remote control unit 3 Star rating of 1.0 ton capacitywith copper condenser coiland connecting pipe and cable not less than 3 mtr to connect with existing electrical point and with wall mounting iron stand for outdoor unit complete all as specified and directed.
S&F room window type AC electric driven (Single Pahse), cooling capacity 4500 K Cal per hour (1.5 Ton) BEE 5 Star rating, high density for dust filteration, 2 way air directional control complete all as specified and directed
S&F Voltage stabilizer 5 KVA capacity for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed.
S&F Voltage stabilizer 4 KVA capacity for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% complete all as specified and directed.
M&L for point wiring with 4.00 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including non-metalic rigid PVC concealed conduit / PVC casing caping of adequates size with all fittings and accessories including PVC sunk box with 3mm thick plastic laminated sheet cover including 4 Sqmm size FRLS PVC insulated & unsheathed single core multistranded copper conductor cable green in colour as earth continuity conductor connected to common earth dolly for one AC socket point on independent board complete all as specified.
S&F plug & DBOX MCB protected socket with 25A MCB DBOXX COMBO DP, 240 Volts, single phase for AC complete all as specified and directed.
S&F SP 6 to 40 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection, testing and commissioning complete all as specified and directed.
S&F frost free double door 3 star Refrigerators, 230Volt electric driven (single phase) of 310 Ltrs or more capacity with inverter compressor complete all as specified and directed.
Supply, Installation and commissioning of water cooler fully stainless steel body, 230 Volt electric driven (single phase) having approx storage nominal cooling capacity of 40/80 Ltrs complete all as specified and directed.
Saket Traders
His And Her Enterprises
ABC CONSTRUCTION CO
Khan Brothers
AIRDOT ENGINEERING
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .