Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.7 LAccepted-AOC | ₹39.7 L | L1 | Accepted-AOC Accepted as per approved tender note |
| 2 | L2₹39.8 LRejected-Finance 0 MELROSE BYPASS NETAJI COLONY ALIGARH ALIGARH UTTAR PRADESH 202001 | ALIGARH | UTTAR PRADESH | 202001 | ₹39.8 L | L2 | Rejected-Finance As per BOQ |
| 3 | L3₹40.7 LRejected-Finance NEW PETROL PUMP K B ROAD AMBERNATH WEST 421505 | AMBERNATH | THANE | MAHARASHTRA | 421505 | ₹40.7 L | L3 | Rejected-Finance As per BOQ |
| Sl No | Description | Qty | Unit | S K ENGINEERING WORKS L3 | BALAJI ENTERPRISES L2 | Raghvendra Engineering L1 |
|---|---|---|---|---|---|---|
| 1.00M & R to WSS @ Ratnagiri Industrial Area | ||||||
| 1.01Strengthening of structures and repairs to traction path way of the CLF at WTP Chalkewadi. | ||||||
| 1.02 | Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261)(i) The Contractor at his request may be allowed to start construction of masonry steining so as not to allow silting of well in oncoming monsoon and while paying masonry, 25% amount shall be withheld and released only when excavation to the full depth is completed. (ii) Dewatering : Total dewatering charges are to be proposed in the tender as lumpsum amount and 75% is payable for excavation and 25% is payable for construction of well / gallery. Out of 75% excavation, break-up shall be as under25% for last 1 M depth. 20%for 2 M depth which is just above las t 1 M depth.15%for 2 M depth which is just above las t 3 M depth.15%for the rest of depth from water tabl e level.The above conditions will restrict the tendencies of agencies to avoid deepening of wells, etc. to the required depth. | 1,018 | Horse Power per Hour | 91 ₹92,638 | 89 ₹90,602 | 89 ₹90,602 |
| 2.00 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by Engineer-in- charge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-8/278) | 2 | MT | 1,16,700 ₹2.3 L | 1,14,200 ₹2.3 L | 1,14,000 ₹2.3 L |
| 3.00 | Cleaning the surface using solutionizers, enumerated below by removing all scales loose particles and preparing the surface for receiving paint | 421 | Square Meter | 20 ₹8,420 | 19 ₹7,999 | 19 ₹7,999 |
| 4.00 | Providing and applying anti rust chemical resistant epoxy coating of approved colour, including scaffolding if necessary. | 421 | Square Meter | 2,150 ₹9.1 L | 2,106 ₹8.9 L | 2,105 ₹8.9 L |
| 5.00 | Repairs to flocculator drive assembly including repairs to worm gear reducer, electric motor and replacement of C.I. Couplings etc. complete | 1 | Job | 1,65,100 ₹1.7 L | 1,61,800 ₹1.6 L | 1,61,400 ₹1.6 L |
| 6.00 | Repairs to traction drive assembly including repairs to worm gear reducer, electric motor and replacement of C.I. Couplings etc. complete. | 1 | Job | 1,24,300 ₹1.2 L | 1,21,800 ₹1.2 L | 1,21,600 ₹1.2 L |
| 7.00 | Repairs to scrapper assembly :- Removing old rubber squeezes and hardware and replacing the same by new water resistant and chemical resistant high grade neoprene rubber with G.I. Hardware etc. complete. | 16 | Each | 2,700 ₹43,200 | 2,645 ₹42,320 | 2,642 ₹42,272 |
| 8.00 | Repairs to central bearing assembly and central turn table : - This item includes repairs/replacement of old faulty damaged parts of central bearing assembly consisting of imported thrust bearing having adequate vertical load carrying capacity of not less than 2.5 ton to carry the vertical load of the equipment and two radial ball bearings to counter the radial load of the walkway. The bearings are housed in a bearing housing fabricated from high grade seamless pipes specially used for manufacturing heavy duty bearings and high carbon steel plate having high shear strength properties. The fabricated housing is machine on high precision lathe machine and cylindrical grinding machine to close tolerances required for press fit of N9 grade. The housing along with the outer race of radial ball bearing shall rotate where as the inner race of the bearing shall be press fit on a spindle with plate .The spindle with plate is fabricate from high carbon high chromium steel machined on high high precision lathe machine and cylindrical grinding machine to close tolerances to achieve n-9 finish. The bearing assembly is also provided with hinje pin joint to cope the misalignment caused due tolevel difference if any between the traction path and central shaft top. The central bearing assembly is welded to a base plate or a foundation plate which is firmly anchored to the central column. The bridge walkway is supported on the bearing assembly via a sturdy central support frame fabricated from m.s channel and angle. | 1 | Job | 2,55,000 ₹2.5 L | 2,49,920 ₹2.5 L | 2,49,300 ₹2.5 L |
Tender Value
₹39.9 L
EMD Value
₹39,900
Closing Date
5 Dec 2025, 5:00 pmClosed
Executive Engineer MIDC
Office of the Executive Engineer MIDC Ratnagiri Division
Strengthening of structures and repairs to traction path way of the CLF at WTP Chalkewadi.
2025_MIDC_1250232_1
61/06
Open Tender
Electrical and Maintenance Works
Ratnagiri Division
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,030
₹39,900
1 Jun 2026
21 Nov 2025
9 Dec 2025
21 Nov 2025
5 Dec 2025
21 Nov 2025
21 Nov 2025 - 24 Nov 2025
M & R to WSS @ Ratnagiri Industrial Area
Strengthening of structures and repairs to traction path way of the CLF at WTP Chalkewadi.
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261)(i) The Contractor at his request may be allowed to start construction of masonry steining so as not to allow silting of well in oncoming monsoon and while paying masonry, 25% amount shall be withheld and released only when excavation to the full depth is completed. (ii) Dewatering : Total dewatering charges are to be proposed in the tender as lumpsum amount and 75% is payable for excavation and 25% is payable for construction of well / gallery. Out of 75% excavation, break-up shall be as under25% for last 1 M depth. 20%for 2 M depth which is just above las t 1 M depth.15%for 2 M depth which is just above las t 3 M depth.15%for the rest of depth from water tabl e level.The above conditions will restrict the tendencies of agencies to avoid deepening of wells, etc. to the required depth.
Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by Engineer-in- charge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd-C-8/278)
Cleaning the surface using solutionizers, enumerated below by removing all scales loose particles and preparing the surface for receiving paint
Providing and applying anti rust chemical resistant epoxy coating of approved colour, including scaffolding if necessary.
Repairs to flocculator drive assembly including repairs to worm gear reducer, electric motor and replacement of C.I. Couplings etc. complete
Repairs to scrapper assembly :- Removing old rubber squeezes and hardware and replacing the same by new water resistant and chemical resistant high grade neoprene rubber with G.I. Hardware etc. complete.
Repairs to existing slip ring assembly by replacing old faulty parts such as backelite rods ,carbon brush holders, current collector carbon brushes etc. complete
Repairs to concrete traction pathway of Clf.: -Dismantling and removing old loose concrete and casting new concrete in M-20 Grade with mixing special concrete adhesive i.e. grout mixture GP-200,chemical EP-TACK 303 anti skit concrete (epoxy mortar slury) ESM SL-1 etc complete.
Removing of old existing railing of approved design and make all including labour and material etc. complete. (Rates excluding GST)
Providing and fixing stainless steel railing of approved design and make all including all labour and material etc. complete. (Rates excluding GST)
Rebate of MS scrap generated from old faulty CLF parts.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.21 MB
ItemSpecification.pdf
Other Document • 0.04 MB
TenderDocument.pdf
Tender Documents • 0.30 MB
BOQ_2155707.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid