REPAIR OF FENCING COMPOUND WALLS DRAINS SEWAGE LINES MANHOLES SEPTIC TANKS AND PATHS ETC IN MD ACCN AREA OF AGE BR II AREA UNDER GE MAINT INF SCHOOL MHOW

Amount

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in sub base, levelling course, etc. complete all as specified and as directed.

M&L for PCC1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M&L for chequered cement concrete cloured tiles with grey cement and pigment of size 25cmX25cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for chequered cement concrete cloured tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut Kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for 60mm thick machine pressed precast concrete cloured interlocking paver block of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand and 25mm thick stone dust as in levelling course of interlocking complete all as specified and as directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand and 25mm thick stone dust stone dust as in levelling course of interlocking complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete ll as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concreteany section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided forcomplete all as specified and as directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts,including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed (each line wire to be measured)

S&F in repairs galvanised steel punched type concertina coil 1050 mm dia (dia of coil when unstretched) and fix to angle iron with 3.15 mm dia GI wire complete all as specified and directed

Excavating post holes or similar holes, each not exceeding 0.5 cum, getting out in Soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed.

M&L for PCC 1:2:4 type B2 using 40 mm graded aggregate as in foundation ,post, etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and directed by Engr- in-Charge.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

M&L 10 mm dia MS TMT bar for fixing of chain link fencing with post complete all as specified and directed.

S&F 11 to 15mm dia of neck MS Screw bolts(Machine made ) with hexagonal or square heads at one end and screwed at other end or both end, and screwed end to be fitted with washer and one hexagonal or square n.exc 20 cm long etc complete all as specified and directed.

S&F MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified and as directed.

S&F Green/Blue powder coated 4mm dia mild steel wire mesh fence system perimeter coated welded wire mesh fence steel panel of area n.exc 10 Sqm and mesh size as directed by Engr-in-Charge complete all as specified and as directed.

S&F powder coated mild steel post for 3D fence including all clamps,bolts, fittings,fixtures and size of post as decided by Engr-in-Charge complete all as specified and directed.

Desilting and cleaning of open drains of any section by mechanical means, including removal of solid and semi-solid materials of any type, vegetation growth, and sludge. The desilted materials shall be disposed of beyond a distance exceeding 5.00 KM from the edges of the drains. The work shall be carried out complete in all respects as specified and as directed by the Engineer-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removing debris outside MD land complete all as specified and as directed.

M&L for brick work with using flyash bricks modular size straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for brick work with using flyash bricks modular size straight or curved on plan any radius in half bricks thick wall built in cm (1:4) complete all as specified and as directed.

M&L for stone walling of squared rubble,regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, cills ,string courses, apex stone, bed plates, kerbs, bands, lintels n.exc 1.5m length etc including necessary form work, weathering, slightly rounded or chamfered angles and throating all as specified and directed.

M&L for 15 mm thick rendering with CM 1:4 on concrete surface finished with even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of white wash on walls including preparation of newly plastered surfaces of any description complete all as specified and as directed.

M&L for cement concrete as in surface channels and drains Type B2 1:2:4 (40 mm graded stone aggregate) complete all as specified and as direced.

Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds etc complete all as specified and as direced.

S&F factory made steel fibre reinforced (SFRC) man holes covers with frames including necessary hold fast/hooks (medium duty) of 560 mm dia or rectangular of equivalent area including fixing with CM 1:4 and not less than 50mm thickness complete all as specified and directed.

As per item No 35.00 above but without frame

Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-painted pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa Plain steel sheet as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.

S&F MS steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for rendering 15 mm thick plaster on concrete /wall surfaces in CM 1:3 mixed with water proofing compound complete all as specified and directed. Note: WPC shall be measured and paid separately.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for applying two coats of Dr Fixit pidecrete URP in sunken floor portion of toilets & bathroom, chajja, staircase. etc by using URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush. Etc complete all as specified and as directed by Engineer-in-Charge.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm including cleaning surfaces complete all as specified and directed.

M&L for PCC 1:5:10, type E-2 (using 40mm graded stone aggregate) as in filling of sunken floors etc. complete all as specified and directed.

Dismantaling of floor hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.

M&L for Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M&L for glazed coloured joint free ceramic tiles ,area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone or concrete surfaces of wall/ceiling etc , icluding raking out joints , hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 marble stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the marble stone 10mm nominal size complete all as specified and directed. Note : (i) Paymentfor providing grooves shall be made separately (ii) Rate includes for any colour of marble stone and cement.

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Charge.

Demolation of precast RCC jallies including raming of any description any in any position set in cement mortar complete all as specified and directed.

M&L for providing precast cement concrete (1:2:4) louvers and jallies 50 mm thick (measured solid) including all mouldings but excluding frame & set in CM 1:4 complete all as specified and directed.

M&L for precast reinforced cement concrete slab type B1, 1:2:4 ( 20mm graded aggregate ) as in landing, drain cover slab ( for manholes etc ) , chajjas , drain cover and shelves and similar articles with plain faces .(Reinforcement shall be measured & paid separatel.) complete all as specified and directed.

Cleaning of Sewage pipe line (RCC/SGSW) of Upto 300mm bore by means of sewage cleaning jet machine / compressors/Drain jetters Pumps and clean out the sluge /liquid mud or any other obstruction material to any depth including nesesarry rodding, working in foul position and depositing of sludge/silt/liquid mud beyond the premises of MOD land etc complete with all specified pressure rating and complete all as directed by Enge-in-charge. Note :- All other arrangements such as electricity, water, etc., are included in the quoted rate.

Cleaning of manhole upto 1.50m depth from bottom of manholes surface including working in foul position and removing of sludge/ silt/liquid mud or any other obstructions materials etc from manholes and depositing beyond the premises of MOD land etc complete all as specified and as directed.

Cleaning of manhole exc 1.50 m but not exc 3.00 m depth from bottom of manholes surface including working in foul position and removing of sludge/ silt/liquid mud or any other obstructions materials etc from manholes and depositing beyond the premises of MOD land etc complete all as specified and as directed.

Cleaning of manhole exc 3.00 m but not exc 4.50 m depth from bottom of manholes surface including working in foul position and removing of sludge/ silt/liquid mud or any other obstructions materials etc from manholes and depositing beyond the premises of MOD land etc complete all as specified and as directed.

De-watering, including removal of sludge, mud, or other waste materials from septic tanks using pumping devices or mechanical means, and disposal of the sludge outside MOD land using covered tanks, complete as directed. Note: The unit rates quoted by the contractor shall be deemed to include the operation of mobile sewage pumps for dewatering of septic tanks wherever required. No extra payment shall be admissible on this account.

De-watering, including removal of sludging mud and other waste materials from soak wells, as well as extraction of brick bats and stone aggregates by means of pumping devices, mechanical methods. The work shall also include draining and removal of sludge from MOD land using covered tanks, complete in all respects as specified and as directed. Note: The unit rates quoted by the contractor shall be deemed to include the operation of mobile sewage pumps for dewatering of soakage wells wherever required. No extra payment shall be admissible on this account.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation or shafts, wells, cesspits, manholes, pier holes, sewage/water lines etc complete and getting out in soft/loose soil complete all as specified and directed.

All as per item No 67.00 above but exc 1.50 m but not exc 3.0 m depth

Returning filling in incl spreading leveling, watering, and well, ramming in layer nexc 25 cm in layers complete all as specified and directed.

Removing excavated material to a distance exc. 50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed.

Demolition and breaking of drain pipes up to 200 mm dia (Salt galzed ware, AC or Reinforced concrete set in cement mortar etc complete all as specified and directed.

S&F reinforced cement concrete drain pipes of 150 mm dia bore class NP-2, laid and jointed complete with collars etc complete all as specified and as directed.

M&L for concrete bed to drain pipes 150 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregagte) etc complete all as specified and as directed.

Cutting in to existing man holes for connecting new drains for internal dia of pipe 150 mm, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1 : 2 :4 type 'B1' smooth finished and reforming benching as required complete all as specified and as directed.

All as per item No 74.00 above but 200 mm dia pipe.

Preparation of old painted or previously untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

S&F in repairs 100 mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

All as per item No 77.00 above but 75 mm dia CI Trap

M&L for salt glazed stoneware drain pipe of 150 mm dia , grade 'A' laid in trenches and jointed in cement mortar 1:1 including necessary testing on completion complete all as specified and directed.

S&F 110 mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed.

All as per item No 80.00 above but 75 mm dia PVC SWR pipe

S&F 110 mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No 82.00 above above but 75 mm dia PVC SWR bends

M&L for DWCPE pipe of 180mm outer dia/ 163mm inner dia meter pipes including testing complete all as specified and directed

M&L for racking out cement/lead joints of CI pipes and filling with lead joints / neat cement plaster to stop leakage of joints complete all as specified & directed

Dismantling water tanks exc 250 Ltrs but not exc 500 ltr capacity and removing to store complete all as specified and directed.

S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete including ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Dismantling existing water tanks of capacity exc 500& n.exc 1000 ltrs lowering from its position and removal to store complete all as specified and directed.

S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 500 ltr but not exceeding 1000 ltr complete all as specified and directed.

S&F In repair 15 mm dia GI steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair GI steel tubing medium grade galvanised 20mm dia with all fittingsand fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

M&L for complete removal of existing treatment on old decorated surfaces of wall and applying two coats of oil emulsion distemper white/coloured over one coat of birla wall care based putty of 1.5 mm thick on walls/ ceiling (where it is required) all as specified and directed by Engr-in-Charge.

M&L for preparation of old concrete/ PCC tile surfaces by brooming with coir/wire brushes and washing down with water to remove the fine dust and applying two coats of Lacquer polish (1001) chemical with pigment as approved by GE complete all as specified and as directed by Engr-in Chage.

Dismantling of paverblocks/ interlocking tiles of any shape, size and thickness cleaning all serviceable tiles and making sub base good in condition including all necessary repairings/ fillings and refixing of the paver blocks/ interlocking tiles again complete all as specified and as directed by Engr-in- Charge.

Dismantling timber scantings 40 sqcm and over in section, in any position complete all as specified and as directed by Engr-in- Charge.

vikas traders (BID ID -3365966)

RK CONSTRUCTION (BID ID -3357409)

ram prashad chotelal batham (BID ID -3358133)

Sameer Auto Engineers (BID ID -3357798)

M/S BABULAL SURAJMAL (BID ID -3363911)

Sudarshan Associates (BID ID -3358275)

ss construction (BID ID -3358149)