Renovation work of the damaged rooms in the Vice Chairman camp office.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR-MR 6.4.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) DSR-MR 4.1.8

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture , over the plasterd wall surface to prepare the surface even and smooth complete. DSR-MR 13.8

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm- [ IN FLOORING] DSR-MR 11.47.2

(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Single leaf. SHUTTER DSR-MR 9.21.1

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed meadium classPVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR-MR 1.3.3

2.5 SQM 2X2.5SQ.MM DSR-MR 1.7.2

4 SQM 2X4SQ.MM DSR-MR 1.7.3

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping xtra sand. complete all as per direction of Engineer-in-Charge. DSR-MR 16.91.2