Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC The lowest tenderer | |
| 2 | L2₹24.5 L+₹2.2 L (9.93%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance Not the lowest tenderer | |
| 3 | L3₹26.4 L+₹4.1 L (18.4%)Rejected-Finance | L3 | Rejected-Finance Not the lowest tenderer | |
| 4 | L4₹29.9 L+₹7.6 L (34.0%)Rejected-Finance | L4 | Rejected-Finance Not the lowest tenderer | |
| 5 | L5₹42.6 L+₹20.3 L (90.8%)Rejected-Finance | L5 | Rejected-Finance Not the lowest tenderer |
Tender Value
Refer Docs
EMD Value
₹71,500
Closing Date
3 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH and RH KIRKEE
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Kirkee Pune 411003
PROVN OF ALUMINIUM WINDOW AND JOINERY TO OFFICER BLOCK NO P 36 4 QTR P 38 1 QTR P 40 4 QTR P 41 4 QTR AND P 42 1 QTR AT RESIDENTIAL COMPLEX AUNDH CAMP UNDER GE MH AND RH KIRKEE
2022_MES_536315_1
8269/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH and RH KIRKEE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH and RH KIRKEE
₹71,500
30 Aug 2022
7 Jul 2022
5 Aug 2022
7 Jul 2022
3 Aug 2022
22 Jul 2022
7 Jul 2022 - 27 Jul 2022
Amount
Taking down chowkats and frame exc 1.5 Sqm and n. exc 4.0 sqm incl shutter with out taking off shutters from frame all as specified and directed by Engr-in-Charge
Taking down chowkats and frame n.exc 1.5 Sqm incl shutter with out taking off shutters from frame all as specified and directed by Engr-in-Charge.
Taking down of Shutters of any description exc 1 sq. m and n exc 2sqm each all as specified
M&L for cutting holes in brick/stone walls in cement mortar for inserting holdfasts at door/ladders and making good dismantled portion in cement mortar 1:3 or cement concrete M-15 grade (nominal mix) using 20mm grade stone aggregate as required, depth of embedded portion of hold fast exc half bricks and not exc one brick complete all as specified and as directed.
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
S&F powder coated (Powder coating shall not be less than 50 micron of approved colour) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-Charge.
S&F Powder coated (Powder coating shall not be less than 50 micron of approved colour) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.
S&F powder coated (Powder coating shall not be less than 50 micron of approved colour) aluminium three track window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings all all as specified and directed by Engr-in-Charge.
S&F 5mm thick sheet glass, ordinary quality in square n exc 0.5 sqm in each pane
S&F 5mm thick Sheet glass, obscured or frosted square in exc 0.5 sqm in each pane
S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.
S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.
M & L for 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified & directed by Engineer-in-Charge.
M & L for 35mm thick flush shutters solid core constructions with block board core, ply wood face panels commercial type on both side all as specified and directed by Engr-in-Charge.
S & F 30 mm thick 2nd class H.W glazed or skeleton shutter open rebated divided intosquare with plain chamfered or rounded mitred and rebated with out sash bar andprepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR Part-1 all as specified.
S&F Solid PVC door frame of size 50mm X47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site all as specified
S&F of 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified
S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm all as specified.
S & F aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type ) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 250 mm all as specified
S&F 100 mm Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified and directed.
S & F 150 mm size extruded aluminium alloy handles,fabricated type anodised all as specified.
M&L for PCC M-15 grade (nominal mix) using 12.50mm graded stone aggregrate as in coping, hold fast, bed bolck filling pressed steel door frame etc all as specified.
S&F in repairs floor door stopper of length 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified
S&F in repairs brass drawer pulls with flush drop (65 to 75mm grip) on 4 screw plate including letting in all as specified
S&F in repairs 19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work all as specified and directed by Engr-in- Charge.
S & F Continuous (piano) hinges Width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised all as specified
M&L in repairs clean sawn timber framed and fixed second class hard wood in scantling all as specified.
S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to new steel window with nut bolt,fixed complete all as specified and directed.
S&F in repairs 20 mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.all as sepcified and directed.
S&F in repairs bracket of fancy type curtain rod powder coated 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) all as directed by Engineer-in-Charge
S & F in repairs stopvalves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm dia all as specified and directed.
S & F in repairs bib taps CP Brass with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm dia all as specified and directed by Engineer-in-Charge.
S & F in repairs brass CP shower rose 125mm size with swivel joint incl fixing to steel pipe as directed
M&L for 75mm thick PCC M-10 grade (nominal mix) using 40mm graded stone aggregate as in plinth protection/path finishing cement concrete surface even and smooth without using extra cement.
S & F in repairs viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings all as specified and directed by Engineer-in-Charge.
S & F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold Withlong screwed shanks and fly nuts screwed for iron pipes 15mm dia all as specified and directed
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor.
S&F in repairs Stainless steel sink with draining board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete.
S&F in repairs steel plate rack of 900mm x 750mm x 200mm as specified and directed.
S & F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor.
S & F in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings i.e float valve, syphon, flushpipe,brackets all as specified and directed by Engineer-in-Charge.
Taking down cement or cement lime plaster on brick or stone walls,ceilings etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for Rendering 10mm thick, on fair faces of brick work or concrete surfaces of walls in CM 1:6 all as specified and directed by Engineer-in-Charge
M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work or concrete surface in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.
M&L for providing water proofing plaster at the junction of wall and slab at chajjas, lintels etc, of average thickness 20mm in CM 1:3 with WPC, finished even and fair without using extra cement all as specified and directed
M&L for welding in repairs n. exc 2.5cm in length as thickness of metal to be welded exc 6 mm but n exc 9mm all as specified
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite all as specified
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises as directed
M&L for Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes all as specified and directed.
M&L Coloured Glazed ceramic tiles 450 x 300 x 7mm thick, on vertical surfaces such as skirting, dados etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10mm thick rendering as in backing coat in CM 1:4 complete all as specified and directed.
M&L for Non Skid ceramic tiles 300 x 300 x 7mm thick (square/ rectangular) area of each tile exceeding area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes all as specified and directed.
M & L for ceramic fully vitrified tiles, dark coloured ceramic floor tiles (group B Ia), 600 mm X 600 mm X 10 mm in floors laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 set and jointed in neat cement slurry and pointed in epoxy mortar to match complete all as specified and directed.
M&L for 18 - 20mm thick machine cut machine polished Kota stone slab flooring laid and jointed in neat cement slurry mixed with pigment to match the shade including cutting and polishing over and including 15 mm thick screed bed in CM 1:3 complete all as specified and directed by Engr-in-Charge.
All as per item No 55 above but in riser, step, skriting, dados and pillar over 10 mm thick plastering in cement morter 1:3 all as specified.
M&L painting to wooden surfaces of any description over 10 cm width or girth including prepration of new or untreated surface and applying two coat of synthetic enamel paint over one coat of pink primer all as specified.
M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer all as specified and directed by Engr-in-Charge.
M&L for preparation of newly primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over a coat of wall care putty not less than 1mm thick finished even and smooth complete all as specified and directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
S.R.M.K Enterprises
MANIYA CONSTRUCTION CO
s.k.engineers
VAISHNAVI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .