New construction work of Bhalsuna road from Km. 01 of village Nanu Ratouli road

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface., mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, as per MORD specification 401

Providing laying and Spreadind Material on a prepared sub base adding cement @4% by weight to the spreade materials manually mixing in place with rotavatorand compecting with the road Roller @ OMC to achivethe Desired Unconfined Compressive Strength and to form a layer of base

Providing and applying tack coat with bitumen VG-10 grade using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom as per Technical Specification Clause 503

Providing and laying and rolling of open graded premix carpet by Manual Means of 20 mm thickness composed of 13.2 mm to 5.6 mm agregates using V.G.-10 grade bitumen bitumen to required line grade and level to serve as wearing course on previously prepared base by manual MORD specifications 508 (excluding cost of labour cess & GST)

Providing and laying seal coat by manual means with 80/100 grade bitumen sealing the voids in bitumens surface laid to the specified levels grade and cross fall using type C as per Technical Specification Clause 510 (excluding cost of labour cess & GST)

Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m transporting to site grading to required slope and compecting to meet requirement of tables 300.1 and 300.2 with a lead up to 1000m as per technical specification clause 301.5

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

Concrete with 4 cm. gauge brick ballast, fine sand of 1.25 FM and cement in proportion of 12:6:1 in foundation including supply of all material labour ,tools, and plants etc. required for proper completion of work. (SI No. 273)1x7.50x1.50x0.20 = 2.25

Laying of hume pipe in position ( Labor only) including labour and T & P etc. required for completion of the work. ( SI No. 10.27)

M-150 brick work in 1:4 cement and coarse sand mortor in foundation and plinth. (SI No. 305a) Wall - 2x2.40x(0.80+0.60+0.460+0.345)/4*2.1=5.57 Deduction Pipe 2x(3.14x0.500x0.500)/4*0.60=-0.240 Net Qty. (5.57-0.24)=5.33

Struck cement Pointing with 1:2 cement and fine sand of 1.25 mm mortar including supply of all material T & P etc complete. (SI No. 574) L/S

Suppy of 350mm dia NP-3 Class hume pipe.

Providing cement and spun spun yarn for filling of joints 350mm NP-3 Class Hume Pipe..Lump/Sum

Teracotta paint as snowcem and white washing etc .Lump/Sum

Letter painting on end plates .Lump/Sum

Please Enable Macros to View BoQ information