Carrying out various electric works on Semi Turn Key Basis for System Strengthening in Business Plan Scheme in the area of EE, EUDD I, Mathura under the jurisdiction of SE, EUDC, Mathura

Cartage of following material from Store centre, Mathura to work site.

ST Pole (11 mtr. Long) (SP-55) Bottom portion galvanized

ST Pole (13 mtr. Long) (SP-70) Bottom portion galvanized

11/0.4 KV 400 KVA T/F

11/0.4 KV 250 KVA T/F.

11/0.4 KV 100 KVA T/F.

LT XLPE/PVC cable 1cx630 sq.mm.

LT XLPE cable of size 3.5x240 Sq. mm.

LT XLPE cable of size 3.5x150 Sq. mm.

LT XLPE cable of size 3.5x70 Sq. mm.

2Cx10 Sq.mm. armoured Cable

4x10 Sq.mm. armoured Cable

33 KV XLPE Cable 3x300 Sq.mm.

11 KV XLPE Cable 3x185 Sq.mm.

11 KV XLPE Cable 3x120 Sq.mm.

11 KV VCB for O/G CTR 200/100/5A, 350 MVA

33 KV Control Panel for Double T/F

ACSR Dog conductor

ACSR Ins. Weasel conductor

33 KV Ligtening Arrestor

33 KV Fuse Set

33 KV Line Isolator 800 Amp.

33 KV Post Insulator

G.I. Wire for Guarding Angle

Cable Jointing Kit 33 KV 3x300 Sq.mm. O/D

Cable Jointing Kit 33 KV 3x300 Sq.mm. S/T

Cable Jointing Kit 11 KV 3x120 Sq.mm. O/D

Cable Jointing Kit 11 KV 3x120 Sq.mm. S/T

Cable Jointing Kit 11 KV 3x185 Sq.mm. O/D

Cartage of above material like various size 33 KV, 11 kv cable, dog/weasel conductor, Jointing kit, vaccume interrupter, distribution transformers, ST/PCC Pole, insulator, control panel, pin insulator, bus isolator, brass glands, channel, clamps etc. from Store Center, Mathura to work site and dismentled material from site to dvvnl store.

Digging of pit & erection of new single support ST Pole (13/11 mtr. long) including grouting of pole and fixing of all clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Digging of pit & erection of new Double Pole Structure ST Pole (13/11 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Grouting of ST Pole with cement, sand, concrete, (CC will be of cement, coarse sand & brick balleast Grouting will be done with the help of wooden/steel formers in a block of size 900mm X 450mm X 1/3 of the full of the support in the CC 1:4:8 as per relevant drawing including back filling & proper ramming.

Providing & Fixing/Installation of 33/0.4 KV, 250 KVA S/S

Providing & Fixing of M.S. Top Channel (125x65x3200 mm)

Providing & Fixing of M.S. Top Channel (125x65x2240 mm)

Providing & Fixing of M.S. Dropper Channel (100x50x2028 mm)

Providing & Fixing of MS Angle (65x65x6x3800 mm) Bracing Set with 04 No. Clamp

Providing & Fixing of MS Angle (65x65x6x2700 mm) Bracing Set with 04 No. Clamp

Providing & Fixing of M.S. Angle for T/F Base

Providing & Fixing of M.S Tee Chanel with Clamp & Nut Bolts, Washer's.

Fixing/Installation of 33 KV L.A.

Fixing/Installation of 11 KV VCB for O/G CTR 200/100/5A, 350 MVA

Earthing of ST/PCC pole/Body earthing of T/F. by M.S earth rod.

Providing & Fixing of MS Nut, Bolt and Washer's

Painting of ST pole.

Digging of pit & erection of Stay rod with grouting cement sand and brick ballast including Nuzzling, binding Complete. (Stay Insulator providing by contractor)

Overhauling of 08 MVA Power T/F at 33/11 KV S/S Cannt, Mathura including following works with required accessories.

Opening of all connection of 08 MVA Power Transformer

Drain Out of Transformer Oil for Replacement of Damaged Packing

Lifting of Top Cover by the help of Crain for replaceement of damaged packing of Top Cover, Inspection Plate including removal damage packing and surface after then fixing of New Packing and Top Cover, Inspection Plate including tighting of Nut & bolts.

Replacement of LT Side Rod

Opening of radiator and removal of damage packing

Fixing of new packing radiator and fixing of radiator of 08 MVA T/F

Opening of the Conservator Tank by the help of Crain removal of damage packing cleaning of surface fixing of new packing and fitting of Conservator Tank

Opening of 33 KV, 11 KV bushing rod very carefully and removal of damage packing and replacement of new packing and fixing of 33 KV, 11 KV Bushing Rod Complete.

Filling of Transformer Oil

Making of All Connection of 08 MVA Power Transformer

Connection of 33 KV Isolator, Post Insulator, Fuse Set, Transformer by the fitting of connecting clamp

Water Level Earthing Complete

Laying of 2Cx10 Sq.mm. amoured Cable

Laying of 4x10 XLPE amoured cable with catenary

Providing & fixing of PVC Pipe 2" diameter

Providing & fixing of PVC Pipe 3" diameter

Providing & fixing of 10 sq.mm. aluminium thimble

Providing & fixing of 16 sq.mm. aluminium thimble

Providing & Laying of 33 KV XLPE Cable 3x50 Sq.mm.

Providing & Fixing of 33 KV XLPE Cable J/K. 3x50 Sq.mm. O/D & I/D

Special Plinth for 630 KVA T/F Construction of Distribution T/F foundation and plinth on RCC pillar as per mentioned and provided dimensions drawing structure and specified details for the same. Due to exception case to be taken food suumerzed area world level monumentle temple situation and safety purpose.

Sagging of 33/11KV line on Dog conductor on erected poles.

Jumpering/Fixing by ACSR Ins. Weasel Conductor on T/F, D/P, T/P, F/P. Etc.

Laying of LT XLPE/PVC cable 1cx630 sq.mm.

Laying of LT XLPE/PVC cable 3.5cX400/240/150/70 sq.mm.

Stringing & Sagging of G.I. Wire for Guarding (6&10 SWG)with biding the arrows (tilli distance appr. 02 Mtr.)

Providing & fixing of Guarding Angle for 33/11 KV Line

Providing & fixing of I Bolt for Guarding

Providing & fixing of Aluminium Biding Wire for Guarding

Providing & fixing of Aluminium Biding Wire 6 SWG

Providing & fixing of clamp for guarding angle for 11 KV line

Installation of Distribution box on ST Pole/PCC Pole for LT Line.

Providing & fixing of Earth Wire Clamp

Providing & fixing of Armoured Rod with ferules for 33 KV (Dog)

Providing & fixing of Danger Board

Providing & fixing of Barbed Wire

Providing & fixing of Stone Pad

Providing & fixing of P.G. Clamp for 33 KV & 11 KV Line

Painting of Subsation structure

Providing for Clamp for HDPE Pipe

Providing & fixing/Installation of LT Protection for 250 KVA T/F (as per Technical Specification)

Providing & fixing of Number Plate for Yard Equipment of nomeclature

Providing & fixing of buchholz relay for control panel

Fixing/Installation of 33 KV Fuse Set

Providing of Structure for 33 KV Fuse Set

Fixing/Installation of 33 KV Line Isolator

Providing of Structure for 33 KV Line Isolator

Fixing/Installation of 33 KV Post Insulator

Providing of Structure for 33 KV Post Insulator

Providing, fixing/filling of Breather for Power T/F with silca gel

Providing & fixing of G.I. Pipe with capping

Providing & fixing of G.I. Pipe Clamp

Fixing of 33 KV V type Steel Cross Arm

Fixing of 11 KV V type Steel Cross Arm

Fixing of 11 KV Pin Insulator with pin

Fixing of 33 KV Pin Insulator with pin

Fixing of Disc Insulator 45 KN & 70 KN (T&C/B&S)

Fixing of Disc fitting 45 KN & 70 KN (T&C/B&S)

Providing & fixing of 33 KV KV F Bracket

Providing & fixing of 11 KV KV F Bracket

Providing & fixing of Packing Piece Clamp for 33 KV/11 KV/Guarding with nut & bolts

Providing & fixing of Aluminium Lug 630 Sq.mm.

Providing & fixing of Aluminium Lug 240 Sq.mm.

Providing & fixing of Aluminium Lug 150 Sq.mm.

Providing & fixing of ST Pole Clamp

Providing & fixing of Hot Dip Galvanized cable support clamp for cable

Filling & fixing of Cable Jointing Kit 33 KV 3x300 Sq.mm. Outdoor type

Fixing of 33 KV Straight Through of size 3x300 Sq.mm.

Filling & fixing of Cable Jointing Kit 11 KV 3x120 Sq.mm. Outdoor type

Fixing of 11 KV Straight Through of size 3x120 Sq.mm.

Filling & fixing of Cable Jointing Kit 11 KV 3x185 Sq.mm. Outdoor type

Providing & Fixing/Installation of C Type LT Panel Disconeccting and dismentling of existing C panel and Supply, installation testing commisioning of factory fabricated & wired metal clad dust and vermin proof double door type outdoor application stand mounting, M.S. Channel Base incliding channel stand with bottom cable entreis The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on nonhygroscopic supports such as CMC/BMC support. panel shall be complete with suitable cable end boxes, double compression glands. panel comparment having special provision for internal locking system for stop the electricity theft The panel board shall be fabricated with gelvnized prime sheet with a minimum thickness of 1.6mm/2mm. with seven tank process powder coated. panel haveing proper space for connecting incomming and outgoing cable terminations.

Providing & Laying of HDPE Pipe 160 mm OD PN-4 PE-80 Grade UV Stabilized HDPE as per IS: 4984 of 6 Meter length

Horizontal Drilling underground installation piping HDPE Pipe 160mm dia with minimum depth of pipe 1.2 below surface for double circuit length of line

Laying of 33/11 KV XLPE cable in HDPE Pipe/Trench/Double Pole structure/Loop etc.

Digging of trench by excavation of earth 0.90/1.5 Mtr. deep put brick on both side, filling of sand & brick on cable & earth ramming and dressing properly with complete job for laying 33/11 KV XLPE cable in trench

Laying of U/G LT XLPE Cable 3.5x70/150/240 with complete job

Installation of D.O. Fuse Set of 11 KV

Concreting of Pole (ST 13 Mtr./11 Mtr.) PCC Pole

Removal of old transformer (250KVA) with all connected accessories from existing plinth.

The Construction of new Plinth of Size 5’X5’X4’ above ground level and one ft. below the ground level for 400/250 KVA transformer

Installation of following transformer on Plinth/Double pole with all connecting accessories jumering etc. including carriage of transformers from store centre, Mathura to work site.

400 KVA Transformer on Plinth

250 KVA Transformer on Plinth

100 KVA Transformer on Double Pole structure

Providing and Installation of Tail less unit complete

Construction of M.S angle fencing of size (3M x3M x2M) around the plinth of 400/250 KVA transformer and gap between the M.S angle should not be more than 65mm.

Complete Gel earthingof 11/0.4 KV 250/400 Distribution Transformer by digging pits 6” dia upto 3 mtr. deep including chemical filled pipe in between (pipe-in-pipe) ISI mark B Grade & connecting with G.I strip of size 50mm X 6mm with neutral/body of 11/0.4 KV distribution transformer to above pipe-in-pipe (PIP) and filling of chemical crystalline conductive mixture containing highly conductive material around the (pipe-in-pipe) up to 3 Mtr. including making of chamber at the top of the earthing. Other details are as below:- 1.Earth pipe material – mild steel, Galvanised. 2-Main Electrode diameter – 42.4mm. 3-Auxiliary Electrode pipe, Diameter – 76mm. 4-Wall Thickness of main Electrode :- 2.6mm. 5-Wall thickness of auxiliary Ist whole:- 3.2mm. 6- Length of earthing electrode (PIP):- 3 Meter.

Proper Road Restoration Kaccha/Pakka (After completion of 33 KV & 11 KV Line work)

Dismantling of 01 Nos. 11 KV Damaged VCB with Strurcture (if any), 29 Nos. single support ST/Rail Pole(13/11/9mtr.) with complete accessories and HT Line Conductor from work site to Store Center, Mathura with safe loading and unloading.

M/s G.D. Electricals